Push constants have been a weird edge-case for a while in that they have
explitic offsets but we've been internally building access chains for
them. This mostly works but it means that passing pointers to push
constants through as function arguments is broken. The easy thing to do
for now is to just treat them like UBOs or SSBOs only without a block
index. This does loose a bit of information since we no longer have an
accurate access range and any indirect access will look like it could
read the whole block. Unfortunately, there's not much we can do about
that. Once NIR derefs get a bit more powerful, we can plumb these
through as derefs and be able to reason about them again.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
vtn_variable_mode_image and _sampler are instead replaced with
vtn_variable_mode_uniform which encompasses both of them. In the few
places where it was neccessary to distinguish between the two, the
GLSL type of the pointer is used instead.
The main reason to do this is that on OpenGL it is permitted to put
images and samplers into structs and declare a uniform with them. That
means that variables can now have a mix of uniform, sampler and image
modes so picking a single one of those modes for a variable no longer
makes sense.
This fixes OpLoad on a sampler within a struct which was previously
using the variable mode to determine whether it was a sampler or not.
The type of the variable is a struct so it was not being considered to
be uniform mode even though the member being loaded should be sampler
mode.
The previous code appeared to be using var->interface_type as a place
to store the type of the variable without the enclosing array for
images and samplers. I guess this worked because opaque types can not
appear in interfaces so the interface_type is sort of unused. This
patch removes the overloading of var->interface_type and any places
that needed the type without the array can now just deduce it from
var->type.
v2: squash in this patch the changes to anv/nir (Timothy)
Signed-off-by: Eduardo Lima <elima@igalia.com>
Signed-off-by: Neil Roberts <nroberts@igalia.com
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2:
An attempt to support SpvExecutionModeStencilRefReplacingEXT's behavior
also follows, with the interpretation to said mode being we prevent
writes to the built-in FragStencilRefEXT variable when the execution
mode isn't set.
v3:
A more cautious reading of 1db44252d0 led
me to a missing change that would stop (what I later discovered were)
GPU hangs on the CTS test written to exercise this.
v4:
Turn FragStencilRefEXT decoration usage without StencilRefReplacingEXT
mode into a warning, instead of trying to make the variable read-only.
If we are to follow the originating extension on GL, the built-in
variable in question should never be readable anyway.
v5/v6: rebases.
v7:
Fix check for gen9 lost in rebase. (Ilia)
Reduce the scope of the bool used to track whether
SpvExecutionModeStencilRefReplacingEXT was used. Was in shader_info,
moved to vtn_builder. (Jason)
v8:
Assert for fragment shader handling StencilRefReplacingEXT execution
mode. (Caio)
Remove warning logic, since an entry point might not have
StencilRefReplacingEXT execution mode, but the global output variable
might still exist for another entry point in the module. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
After bebe3d626e, b->fail_jump is prepared after vtn_create_builder
which can longjmp(3) to it through its vtx_assert()s. This corrupts
the stack and creates confusing core dumps, so we need to avoid it.
While there, I decided to print the offending values for debugability.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
From the SPIR-V spec, OpTypeImage:
"Depth is whether or not this image is a depth image. (Note that
whether or not depth comparisons are actually done is a property of
the sampling opcode, not of this type declaration.)"
The sampling opcodes that specify depth comparisons are
OpImageSample{Proj}Dref{Explicit,Implicit}Lod, so we should set
is_shadow only for these (we were using the deph property of the
image until now).
v2:
- Do the same for OpImageDrefGather.
- Set is_shadow to false if the sampling opcode is not one of these (Jason)
- Reuse an existing switch statement instead of adding a new one (Jason)
Fixes crashes in:
dEQP-VK.spirv_assembly.instruction.graphics.image_sampler.depth_property.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: mesa-stable@lists.freedesktop.org
Add helpers to get the number of src/dest components for an intrinsic,
and update spots that were open-coding this logic to use the helpers
instead.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
ARB_gl_spirv adds the ability to use SPIR-V binaries, and a new
method, glSpecializeShader. Here we add a new function to do the
validation for this function:
From OpenGL 4.6 spec, section 7.2.1"
"Shader Specialization", error table:
INVALID_VALUE is generated if <pEntryPoint> does not name a valid
entry point for <shader>.
INVALID_VALUE is generated if any element of <pConstantIndex>
refers to a specialization constant that does not exist in the
shader module contained in <shader>.""
v2: rebase update (spirv_to_nir options added, changes on the warning
logging, and others)
v3: include passing options on common initialization, doesn't call
setjmp on common_initialization
v4: (after Jason comments):
* Rename common_initialization to vtn_builder_create
* Move validation method and their helpers to own source file.
* Create own handle_constant_decoration_cb instead of reuse existing one
v5: put vtn_build_create refactoring to their own patch (Jason)
v6: update after vtn_builder_create method renamed, add explanatory
comment, tweak existing comment and commit message (Timothy)
Refactored from spirv_to_nir, in order to be reused later.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
v2: renamed method (from vtn_builder_create), add explanatory comment
(Timothy)
Not used in GL but 8 and 16 component vectors exist in OpenCL.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Generated with
git grep -l nir_intrinsic_image | xargs \
sed -i 's/nir_intrinsic_image/nir_intrinsic_image_var/g'
and some manual fixing in nir_intrinsics.h
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
So now, during spirv_to_nir, it uses the capability instead of the
extension. Note that we are really doing here is treating
SPV_AMD_gcn_shader as other supported extensions. SPV_AMD_gcn_shader
is not the first SPV extension supported. For example, the capability
draw_parameters infers if the extension SPV_KHR_shader_draw_parameters
is supported or not.
This could be seen as counter-intuitive, and that it would be easier
to define which extensions are supported, and based our checks on
that, but we need to take into account that some capabilities are
optional from core, and others came from new extensions.
Also this commit would make the implementation of ARB_spirv_extensions
easier.
v2: AMD_gcn_shader capability renamed to gcn_shader (Daniel Schürmann)
Reviewed-by: Daniel Schürmann <daniel.schuermann@campus.tu-berlin.de>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
We don't need anymore the source and destination's data type, just
their bitsize.
v2:
- Use glsl_get_bit_size () instead (Jason).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
OpenCL kernels also have int8/uint8.
v2: remove changes in nir_search as Jason posted a patch for that
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Our previous handling of barriers always used the big hammer and didn't
correctly emit memory barriers when specified along with a control
barrier. This commit completely reworks the way we emit barriers to
make things both more precise and more correct.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This capability allows gl_ViewportIndex and gl_Layer to also be used
as outputs in Vertex and Tesselation shaders.
v2: Make conditional to the capability, add gl_Layer, add tesselation
shaders. (Iago)
v3: Don't export to tesselation control shader.
v4: Add Reviewd-by tag.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Previously, we were storing a pointer to the vtn_value because we use it
to look up decorations when we create input/output variables. This
works, but it also may be useful to have the id itself so we may as well
store that instead.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This reworks the error checking on our generic handling of decorations.
The objective is to validate all of the SPIR-V assumptions we make
up-front and convert redundant checks to compiled-out asserts. The most
important part of this is to ensure that member decorations only occur
on OpTypeStruct and that the member is never out-of-bounds. This way
later code can assume that the member is sane and not have to worry
about OOB array access due to a misplaced OpMemberDecorate.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is a bit simpler since we have fewer enum values in the case. It's
also a bit more efficient because we're making fewer glsl_get_* calls.
While we're at it, add better type validation.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Now that vtn_base_type is a real and full base type, we can switch on
that instead of the GLSL base type which is a lot fewer cases in our
switch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The Talos Principle contains shaders with an OpSelect between two
vectors where the condition is a scalar boolean. This is technically
against the spec bout nir_builder gracefully handles it by splatting
out the condition to all the channels. So long as the condition is a
boolean, just emit a warning instead of failing.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104246
Previously, we just gave them exactly the same type as the respective
image (which already had a sampler2D or similar type). Now they have
their own base type and a pointer to the vtn_type for the image.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
This autogenerated pass will automatically find and set the type field
on all vtn_values. This way we always have the type and can use it for
validation and other checks.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
At the moment, this just lets us drop the const_type for constants and
unify things a bit. Eventually, we will use this to store the types of
all SPIR-V SSA values.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
