The point of tracking the value was removed in February 2012
(65b096aedd), and this should have
been removed at the same time.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
I don't see any reason for it -- it was introduced with the DRI2
invalidate work by krh in 2010 with no explanation. I suspect it was
something about wanting the same drm_intel_bo struct underneath multiple
openings of the BO within one process, but that's covered by libdrm at
this point. As far as the struct region goes, it is not threadsafe, so
multiple contexts sharing a region could have mixed up the map_count and
assertion failed or worse.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Several commits on master for the 9.1 branch had "NOTE" messages in a
slightly different format.
NOTE: This is a candidate for stable branches
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Now all the per-message enums from mtypes are gone. Now we can extend
unique message IDs into all generators of debug output without having to
update mtypes.h for each one.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This ends up reusing the dynamic ID support, so a silly enum gets to go
away. We don't assign good IDs to different messages yet, but at least
that's tractable now.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
I was testing the ARB_debug_output code and wrote an obvious sample that
should have hit this, and got confused that my ARB_debug_output was
broken.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
I tried to ensure that performance in the non-debug case doesn't change
(we still just check one condition up front), and I think the impact is
small enough in the debug context case to warrant including all of it.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This doesn't provide detailed error type information, but it's important
to get these relatively severe but rare error messages out to the
developer through whatever mechanism they are using.
v2: Rebase on new WARN_ONCE additions.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
We can emit messages now without always having to use the same ID for
each, or having a giant table of all possible errors in mtypes.h.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
I want to have dynamic IDs so that we don't need to add to mtypes.h for
every error we might want to add. To do so, I need to get rid of the
static arrays and actually support all the crazy filtering of dynamic IDs
that we already support for application-provided error sources.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This was apparently not noticed because we don't have any testing of
application-generated debug output. However, as I'm changing the
GL-generated debug output to use the same path as
application/middleware-generated debug output, this obviously became an
issue.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
These will get reused by new ARB_debug_output messages in drivers/core,
instead of having the caller pass GL enums and have us immediately
switch-statement those into enums.
Add source enums will be handled in the next commit, because the way
different sources are handled at the moment is pretty strange.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The new one doesn't have the same behavior for GL_NO_ERROR, but we don't
produce errors with GL_NO_ERROR as the error type.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This partly reverts 6ace2e41da.
Apparently with GL_MESA_texture_array fixed-function texturing
with texture arrays is possible, and hence we have to handle TXP.
(Though noone seems to know the semantics, softpipe now does what
it did before, which is to NOT project the array coord, llvmpipe
for instance however indeed does project the array coord. Unlike
before it will project the comparison coord for shadow1d array, as
that clearly was an error.)
This fixes https://bugs.freedesktop.org/show_bug.cgi?id=61828.
Reviewed-by: Brian Paul <brianp@vmware.com>
X11 is already checked conditionally below.
Fixes OSMesa-only configurations to not require X11.
Note: This is a candidate for the 9.1 branch.
Reviewed-by: Brian Paul <brianp@vmware.com>
This was hit on the glTexStorage2D() path.
Note: this is a candidate for the stable branches
Signed-off-by: Alan Hourihane <alanh@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
The second digit was off by one, which meant we accidentally treated
GTn as GT(n-1). This also meant no support for GT1 at all.
NOTE: This is a candidate for stable branches.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
We'll want to reuse this for non-occlusion queries in the future.
Plus, it's a single logical task, so having it as a helper function
clarifies the code somewhat.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Again, eliminating a global variable in favor of a per-query object
variable will help in a future where we have more queries in hardware.
Personally, I find this clearer: there's just the query object's BO,
rather than two variables that usually shadow each other.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The code a few lines above calls brw_emit_query_begin() if !query->bo,
and that creates query->bo. So it should always be non-NULL.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
If we haven't allocated a BO yet, we need to do that. Or, if there
isn't enough room to write another pair of values, we need to gather up
the existing results and start a new one. This is simple enough.
However, the old code was awkwardly split into two blocks, with a
write_depth_count() placed in the middle. The new depth count isn't
relevant to gathering the old BO's data, so that can go after the
reallocation is done. With the two blocks adjacent, we can merge them.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Since we already have an index in the brw_query_object, there's no need
to also keep a global variable that shadows it.
Plus, if we ever add support for more types of queries that still need
the per-batch before/after treatment we do for occlusion queries, we
won't be able to use a single global variable. In contrast, per-query
object variables will work fine.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
brw->query.index is initialized to 0 just a few lines before it's
copied to first_index.
Presumably the idea here was to reuse the query BO for subsequent
queries of the same type, but since that doesn't happen, there's no need
to have the extra code complexity.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This code was really difficult to follow, for a number of reasons:
- Queries were handled in four different ways (TIMESTAMP writes a single
value, TIME_ELAPSED writes a single pair of values, occlusion queries
write pairs of values for the start and end of each batch, and other
queries are done entirely in software. It turns out that there are
very good reasons each query is handled the way it is, but
insufficient comments explaining the rationale.
- It wasn't immediately obvious which functions were driver hooks
and which were helper functions. For example, brw_query_begin() is
a driver hook that implements glBeginQuery() for all query types, but
the similarly named brw_emit_query_begin() is a helper function that's
only relevant for occlusion queries.
Extra explanatory comments should save me and others from constantly
having to ask how this code works and why various query types are
handled differently.
v2: Incorporate Eric's feedback: change "as soon as possible" to "the
results will be present when mapped."
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
For timestamp queries, we just write a single value to a BO. The
natural place to write that is element 0, so we should do that.
Previously, we wrote it into element 1 (the second slot) leaving
element 0 filled with garbage.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
In OpenGL, most queries record statistics about operations performed
between a defined beginning and ending point. However, TIMESTAMP
queries are different: they immediately return a single value, and there
is no start/stop mechanism.
Previously, Mesa implemented TIMESTAMP queries by calling EndQuery
without first calling BeginQuery. Apparently this is DirectX
convention, and Gallium followed suit. I personally find the asymmetry
jarring, however---having BeginQuery and EndQuery handle a different set
of enum values looks like a bug. It's also a bit confusing to mix the
one-shot query with the start/stop model.
So, add a new QueryCounter driver hook for implementing TIMESTAMP. For
now, fall back to EndQuery to support drivers that don't do the new
mechanism.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Something I never got around to implement, but this is the tgsi execution
side for implementing texel offsets (for ordinary texturing) and explicit
derivatives for sampling (though I guess the ordering of the components
for the derivs parameters is debatable).
There is certainly a runtime cost associated with this.
Unless there are different interfaces used depending on the "complexity"
of the texture instructions, this is impossible to avoid.
Offsets are always active (I think checking if they are active or not is
probably not worth it since it should mostly be an add), whereas the
sampler_control is extended for explicit derivatives.
For now softpipe (the only user of this) just drops all those new values
on the floor (which is the part I never implemented...).
Additionally this also fixes (discovered by accident) inconsistent
projective divide for the comparison coord - the code did do the
projection for shadow2d targets, but not shadow1d ones. This also
drops checking for projection modifier on array targets, since they
aren't possible in any extension I know of (hence we don't actually
know if the array layer should also be divided or not).
Reviewed-by: Brian Paul <brianp@vmware.com>
Similar fix to what is done for the non-llvm case, we could otherwise still
hit the stages (near certainly with gs) which crash. It is probably a much
better idea to skip trying to draw at that point anyway.
Reviewed-by: Brian Paul <brianp@vmware.com>
It seems easiest (and best) if we simply skip all the later stages
(after stream output).
(This is different to the llvm case at least for now where we will
simply try to render garbage, though both behaviors should be correct.)
Fixes piglit glsl-1.40-tf-no-position with softpipe.
Reviewed-by: Brian Paul <brianp@vmware.com>
With glsl 1.40 writing position is not required (useful for transform
feedback, though in fact it's still possible to rasterize such geometry
even if the results aren't too well defined).
Prevents crashes in that case. Fixes piglit glsl-1.40-tf-no-position.
Not quite sure this is 100% correct as it also skips clipdistance
clipping which could still work (but not sure if the result would
really be needed?)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com
Reviewed-by: Brian Paul <brianp@vmware.com>
Since c8eb2d0e82 llvmpipe checks if it's
actually legal to create a surface. The opengl state tracker doesn't quite
obey this so for now just warn instead of assert.
Also warn instead of disabled assert when creating sampler views
(same reasoning).
Addresses https://bugs.freedesktop.org/show_bug.cgi?id=61647.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
