The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
This opcode is responsible for setting up the buffer base address and
per-thread scratch space fields of a scratch message header. For the
most part, it's a copy of g0 but some messages need us to zero out g0.2
and the bottom bits of g0.5.
This may actually fix a bug when nir_load/store_scratch is used. The
docs say that the DWORD scattered messages respect the per-thread
scratch size specified in gN.3[3:0] in the message header but we've been
leaving it zero. This may mean that we've been ignoring any scratch
reads/writes from a load/store_scratch intrinsic above the 1KB mark.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7084>
These should be more accurate than the current cycle counts, since
among other things they consider the effect of post-scheduling passes
like the software scoreboard on TGL. In addition it will enable us to
clean up some of the now redundant cycle-count estimation
functionality in the instruction scheduler.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Passing shader_stats to the fs_generator constructor means that the
SIMD8 shader stats from the visitor (such as the scheduler mode) will be
reported out for the SIMD16/SIMD32 versions as well.
As you can see, we are now passing 'shader_stats' and 'stats' to
generate_code(), which is obviously odd looking. Ian rebased and
committed an old patch of mine which added the shader_stats struct on
July 30 in commit dabb5d4bee (i965/fs: Add a shader_stats struct.) and
shortly after on August 12 Jason added the brw_compile_stats struct in
commit 134607760a (intel/compiler: Fill a compiler statistics struct).
I'd like to combine the two, but I'm not sure how. shader_stats is an
input to generate_code() while brw_compile_stats is an output and is
only used by the Vulkan driver. Leave it as is for now...
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4093>
This only does half of the work. The actual representation of the
idom tree is left untouched, but the computation algorithm is moved
into a separate analysis result class wrapped in a BRW_ANALYSIS
object, along with the intersect() and dump_domtree() auxiliary
functions in order to keep things tidy.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
The invalidate_analysis() method knows what analysis passes there are
in the back-end and calls their invalidate() method to report changes
in the IR. For the moment it just calls invalidate_live_intervals()
(which will eventually be fully replaced by this function) if anything
changed.
This makes all optimization passes invalidate DEPENDENCY_EVERYTHING,
which is clearly far from ideal -- The dependency classes passed to
invalidate_analysis() will be refined in a future commit.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
Like a SHADER_OPCODE_MEMORY_FENCE but doesn't doesn't generate any
assembly code.
Will be used when the compiler shouldn't reorder certain instructions
but there's no need to generate code for the HW to do it -- as the
ordering will be guaranteed by other means.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3226>
Having the IR opcodes locked to their hardware representation is risky
because it causes opcodes as different as BRC and IFF to compare equal
at the IR level (luckily the back-end only ever uses one opcode from
each group, right now), and it prevents us from supporting
instructions that change their hardware representation across
generations, which will become a problem on Gen12+ platforms.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Before this commit, we had only FPRoundingMode decoration (the per
instruction one) that is applied during the SPIR-V handling. In
vtn_alu we find out the rounding mode, and generate the code
accordingly that later will be used to look for the respective
nir_op_f2f16_{rtz,rtne}.
Per-instruction gets prioritized because we make them explicit
conversions (with RTZ or RTNE nir opcodes) and they will override the
default execution mode defined with float controls. However, we need
to come back to the mode defined by float controls after the execution
of the FP Rounding instruction.
Therefore, the new SHADER_OPCODE_FLOAT_CONTROL_MODE opcode will be
used to set the default rounding mode and denorms treatment in the
whole shader while the pre-existent SHADER_OPCODE_RND_MODE, will be
used as prioritized rounding mode in a per-instruction basis.
v2:
- Fix bug in defining BRW_CR0_FP_MODE_MASK.
v3:
- Update comment (Caio).
v4:
- Split the patch into the helper and the new opcode (this
one) (Caio).
v5:
- Add an explanation on the actual purpose and priority of the newly
introduced opcode in the commit log (Caio).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
It's not used by anything anymore now that so much lowering has been
moved into NIR. Sadly, we still need on in brw_compile_gs() for
geometry shaders on Sandy Bridge. Short of a lot of pointless work,
that one's probably not going away.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit is all annoying plumbing work which just adds support for a
new brw_compile_stats struct. This struct provides a binary driver
readable form of the same statistics we dump out to stderr when we
INTEL_DEBUG is set with a shader stage.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It'll grow further, and we'd like to avoid adding an additional
parameter to fs_generator() for each new piece of data.
v2 (idr): Rebase on 17 months. Track a visitor instead of a cfg.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The rules for gl_SubgroupSize in Vulkan require that it be a constant
that can be queried through the API. However, all GL requires is that
it's a uniform. Instead of always claiming that the subgroup size in
the shader is 32 in GL like we have to do for Vulkan, claim 8 for
geometry stages, the maximum for fragment shaders, and the actual size
for compute.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Right now, all keys have two things in common: a program string ID and a
sampler_prog_key_data. I'd like to add another thing or two and need a
place to put it. This commit adds a new brw_base_prog_key struct which
contains those two common bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that NIR_TEST_* doesn't swap the shader out from under us, it's
sufficient to just modify the shader rather than having to return in
case we're testing serialization or cloning.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
With 8 and 16-bit types and anything where we have to use non-trivial
strides registersto deal with restrictions, we end up with things that
look like partial writes even though we don't care about any values in
the register except those written by that instruction. This is
particularly important when dealing with loops because liveness sees
is_partial_write and the fact that an old version from a previous loop
iteration may be valid at that point and extends all purely partially
written values to the entire loop.
This commit adds a new UNDEF instruction which does nothing (the
generator doesn't emit anything) but which does a fake write to the
register. This informs liveness that we don't care about any values
before that point so it won't consider those registers to be falsely
live. We can safely emit UNDEF instructions for all SSA values that
come in from NIR and nearly all temporaries generated by various stages
of the compiler. In particular, we need to insert UNDEF instructions
when we handle region restrictions because the newly allocated registers
are almost guaranteed to be partially written.
No shader-db changes.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110432
Reviewed-by: Matt Turner <mattst88@gmail.com>
There are no 8-bit immediates, so assert in that case.
16-bit immediates are replicated in each word of a 32-bit immediate, so
we only need to check the lower 16-bits.
v2:
- Fix is_zero with half-float to consider -0 as well (Jason).
- Fix is_negative_one for word type.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The scalar back-end uses SHADER_OPCODE_SEND for all surface messages so
we no longer need the non-logical opcodes there. Prefix them VEC4 so
it's clear that they're only used by the vec4 back-end.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The unused typed surface read/write support in the vec4 back-end has
been dropped and the fs back-end now uses SHADER_OPCODE_SEND for all
image and buffer ops. There's no reason to keep these opcodes around
anymore.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Since switching to SHADER_OPCODE_SEND for image operations, we no longer
need the non-logical opcode.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
