Changes since v1:
- Add pipe caps for etnaviv, freedreno, swr and virgl
Signed-off-by: Lyude <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
pipe_mutex_destroy() was made unnecessary with fd33a6bcd7.
Replace was done with:
find ./src -type f -exec sed -i -- \
's:pipe_mutex_destroy(\([^)]*\)):mtx_destroy(\&\1):g' {} \;
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
pipe_mutex_init() was made unnecessary with fd33a6bcd7.
Replace was done using:
find ./src -type f -exec sed -i -- \
's:pipe_mutex_init(\([^)]*\)):(void) mtx_init(\&\1, mtx_plain):g' {} \;
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Nouveau does not currently have logic to implement this as a library
function. Even though such a library could be written, there's no big
advantage to do it that way for now given that int64 is a very uncommon
use-case. Allow a driver to expose INT64 without supporting division and
modulo operations.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Make the cap consistent with PIPE_CAP_INT64.
Aside from the hypothetical case of using draw for vertex shaders (and
actually caring about doubles...), every implementation supports doubles
either nowhere or everywhere.
Also, st/mesa didn't even check the cap correctly in all supported
shader stages.
While at it, add a missing LLVM version check for 64-bit integers in
radeonsi. This is conservative: judging by the log, LLVM 3.8 might be
sufficient, but there are probably bugs that have been fixed since then.
v2: fix clover (Marek)
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
v1.1: move to using a normal CAP. (Marek)
v2: fill in the cap everywhere
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This enables gallium support for EGL_ANDROID_native_fence_sync, for
drivers which support PIPE_CAP_NATIVE_FENCE_FD.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Drivers that support this benefit by saving one lowering pass in the
GLSL-to-TGSI conversion.
radeonsi already supports this because all outputs are stored in temporary
variables before the export (except for TCS outputs, which have always
been readable in TGSI anyway due to their special semantics).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the driver to signal that it can't handle random
interleaving of attributes across buffers. This is required for
ARB_transform_feedback3, and it's initialized to whatever the previous
value of PIPE_CAP_STREAM_OUTPUT_PAUSE_RESUME was except for nv50 where
it is disabled. Note that the proprietary drivers never expose
ARB_transform_feedback3 on any GT21x's (where nouveau previously did),
and after some effort I was unable to get it to work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is a screen cap because drivers are expected to support it either
for all shader types or for none of them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Replace the num-resources-mapped hud with
num-textures-mapped and num-buffers-mapped, so we can
differentiate the map counts for these two different resources.
Reviewed-by: Brian Paul <brianp@vmware.com>
Some OpenGL apps, like Cinebench R15, have many glDrawElements(GL_QUADS)
calls. Since we don't directly support quads we have to convert these
calls into GL_TRIANGLES which involves generating a new index buffer.
This patch saves the new/translated index buffer in the hope that it
can be reused for a later draw call.
Cinebench R15 increases by about 20% with this change.
The NobelClinician Viewer app also hits this code.
Tested with full piglit run.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
With this patch, guest statistic gathering interface is added to
svga winsys interface that can be used to gather svga driver
statistic. The winsys module can then share the statistic info with
the VMX host via the mksstats interface.
The statistic enums used in the svga driver are defined in
svga_stats_count and svga_stats_time in svga_winsys.h
Reviewed-by: Brian Paul <brianp@vmware.com>
Some hardware can't render to color/depth buffers of mixed bitness. When
that happens a fallback has to happen, but this allows the driver to
express that this isn't an optimal scenario. The purpose of this is to
remove such fbconfigs from the GLX/EGL config list.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
required by glClientWaitSync (GL 4.5 Core spec) that can optionally flush
the context
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This allows Gallium drivers to advertise the subpixel precision
for floating point viewports bounds.
v2:
- Set ViewportSubpixelBits in st_init_limits.
Signed-off-by: Józef Kucia <joseph.kucia@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
SVGA_3D_CMD_DX_GENRATE_MIPMAP & SVGA_3D_CMD_DX_SET_PREDICATION commands
are not presents in fedora 24 kernel module. Because of this
reason application like supertuxkart are not running.
v2: Add few comments and code modifications suggested by Brian P.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
D3D9 has a different behaviour for depth bias.
For OGL/D3D1X, the depth bias unit is the
minimal resolvable value for the depth buffer,
which depends on the format (and has different
behaviour for float depth buffers).
For D3D9, the depth bias unit is 1.0f.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This says how many window rectangles are supported by the
implementation, although it may not exceed PIPE_MAX_WINDOW_RECTANGLES.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Some hardware supports primitive restart on patch primitives, and other
hardware does not. Modern GL and ES include a query for this feature;
adding a capability bit will allow us to answer it.
As far as I know, AMD hardware does not support this feature, while
NVIDIA and Intel hardware does. However, most Gallium drivers do not
appear to support tessellation shaders yet. So, I've enabled it for
nvc0 and disabled it everywhere else.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Instead of a hard-coded 512. The query typically returns 65536 now.
Fall back to 512 if the query fails as we do for vertex shaders (which
should never happen).
Note that we don't actually enforce this limit in our shaders but it gets
reported via the glGetProgramivARB(GL_MAX_PROGRAM_INSTRUCTIONS_ARB) query.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Add PIPE_CAP to determine if the GL extension
'GL_ARB_framebuffer_no_attachments' shall be
supported.
The driver is required to support 'PIPE_FORMAT_NONE'
via its 'is_format_supported()' callback in order
to determine the MSAA modes the hardware supports so
that values requested from the application using
'GL_ARB_framebuffer_no_attachments' may be quantized
to what the hardware expects.
V.2:
Fix doc for a more detailed description of the PIPE_CAP
and the corresponding GL constant.
V.3:
Renamed and repurposed once again.
V.4:
Remove CAP from cap_mapping array.
[airlied: fix damaged whitespace]
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This patch adds the following HUD queries:
.num-resource-updates -- number of resource update. Commands include
UPDATE_SUBRESOURCE, UPDATE_GB_IMAGE.
.num-buffer-uploads -- number of buffer uploads.
.num-const-buf-updates -- number of set constant buffer.
.num-const-updates -- number of set shader constant.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
To find out how many image readback command is issued.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
To know when we're flushing the command buffer because we need to
write to surface in the command buffer.
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
