This is a trivial port of 1d6ead3804 from
the FS.
No significant performance difference on trex (misplaced the data, but it
was about n=20).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This is different from how we do it in the FS - we are using MAD even when
some of the args are constants, because with the relatively unrestrained
ability to schedule a MOV to prepare a temporary with that data, we can
get lower latency for the sequence of instructions.
No significant performance difference on GLB2.7 trex (n=33/34), though it
doesn't have that many MADs. I noticed MAD opportunities while reading
the code for the DOTA2 bug.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
draw_vertex_buffer declared the size field to be a size_t, but the LLVM
code used an int32 instead. This caused problems on big-endian 64-bit
targets, because the first 32-bit chunk of the 64-bit size_t was always 0.
In one sense size_t seems like a good choice for a size, so one fix
would have been to try to get the LLVM code to use the equivalent of
size_t too. However, in practice, the size is taken from things like ~0
or width0, both of which are int-sized, so it seemed simpler to make the
size field int-sized as well.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Without this, llvmpipe ends up giving a zero size to all uncompressed textures
on non-x86 systems, since align() cannot handle a 0 alignment.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
lp_build_add and lp_build_sub have fallback code for cases
that cannot be handled by known intrinsics. For UNORM formats,
this code was using modulo rather than saturating arithmetic.
This fixes some rendering issues for a gnome session on System z.
It also fixes various piglit tests on z, such as
spec/ARB_color_buffer_float/GL_RGBA8-render.
The patch deliberately doesn't tackle the more complicated
SNORM case.
Tested against piglit on x86_64 and System z with no regressions.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Richard Sandiford <rsandifo@linux.vnet.ibm.com>
Now that Gen6+ relies on hardware contexts, we don't need to record an
occlusion query value at the end of each batch. That means we no longer
need to reserve space for the absurd number of PIPE_CONTROLs required to
do that on Sandybridge.
See commit 4e087de51a, which bumped this
up to 60 bytes. This is not quite a revert, as it uses 24 bytes instead
of 16, and saves the comments. As far as I can tell, the old value of
16 bytes was just wrong, so we shouldn't go back to that.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
We always allocate the maximum amount of space and never change it, so
it makes sense to do it once. Programming it on startup also lets us
skip re-programming it from BLORP.
This removes a tiny amount of overhead from our drawing loop.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This removes a tiny bit of code from our drawing loop.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we emit invariant state at startup (and never select the media
pipeline), the 3D pipeline will always already be selected, even if BLORP
is the first operation. So this is unnecessary.
v2: Fix unused variable warning (intel_context is no longer used).
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we have hardware contexts, we can safely initialize our GPU
state once at startup, rather than needing a state atom with the
BRW_NEW_CONTEXT flag set.
This removes a tiny bit of code from our drawing loop.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The existing code already returned a boolean; this just clarifies that.
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
We already implemented this for ES3, so we just need to turn it on.
Fixes 6 Piglit tests:
spec/glsl-1.50/compiler/built-in-functions/determinant-mat[234].{vert,frag}
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Page 17 of the GLSL 1.50.11 specification states:
"There is a built-in macro definition for each profile the
implementation supports. All implementations provide the following
macro:
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Previously we only supported "#version 150". This patch recognizes
"compatibility" to give the user a more descriptive error message.
Fixes Piglit's version-150-core-profile test.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
If we didn't successfully parse the #version line, there's no point in
continuing with parsing and compiling: it's already failed.
Furthermore, it can actually be harmful: right after handling #version,
we call _mesa_glsl_initialize_types(), which checks state->es_shader and
language_version. If it isn't valid, it hits an assertion failure.
Fixes Piglit's "invalid-version-es." When processing "#version 110 es",
our code set state->es_shader and state->language_version = 110. It
then properly determined that this was invalid and flagged an error.
Since we continued anyway, we hit the assertion mentioned above.
NOTE: This is a candidate for the 9.1 branch.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
The GPU (at least a3xx, but I think also a2xx) can render directly to
memory, bypassing tiling. Although it can't do this if blend, depth,
and a few other features of the pipeline are enabled. This direct
memory mode can be faster for some sorts of operations, such as simple
blits. In particular, this significantly speeds up XA by avoiding to
pull the entire dest pixmap into GMEM, render tiles, and write it all
back out again. This should also speed up resource copy-region and
blit.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The adreno a3xx GPU is found in newer snapdragon devices, such as the
nexus4. The a3xx is GLESv3 and OpenCL capable, although that is not
enabled yet in gallium.
Compared to a2xx, it introduces an entirely new unified shader ISA, and
re-shuffles all or nearly all of the registers. The good news is that
(for the most part) the registers are more orthogonal, not combining
unrelated state in a single register. And that there is a lot more
flexibility, so we don't need to patch and re-emit the shader like we
did on a2xx.
The shader compiler is currently quite dumb, there would be a lot of
room for improvement with an optimizing pass. Despite that, with the
a320 in my nexus4 it seems to be ~2-3x faster compared to the a220 in my
HP touchpad.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Split the parts that are specific to adreno a2xx series GPUs from the
parts that will be in common with a3xx, so that a3xx support can be
added more cleanly.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
We use 128bit vector interleave for untwiddling in the blend code (with
256bit vectors). llvm generates terrible code for this for some reason,
so instead of generating a shuffle for 2 128bit vectors use a
extract/insert shuffle instead (it only seems to matter we're not using
128bit wide vectors for the shuffle). This decreases instruction count of
the blend code generated for a rgba8 render target without blending from
169 to 113 with llvm 3.1 and from 136 to 114 in llvm 3.2/3.3, and I got
a ~8% (llvm 3.1) and ~5% (3.2/3.3) performance improvement in gears.
(The generated code is still not terribly good as we could actually avoid
the interleaving completely but llvm can't know this.)
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Probably due to CRLF endings, the discovery of python import statements
was not working on Windows builds, causing incremental builds to often
fail unless one wiped out the build directory.
NOTE: This is a candidate for stable branches.
We flush pending rendering before running CopySubBuffer, which
ensures that the right bits get to the screen.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
The coordinates need to be inverted between glX and gallium.
NOTE: This is a candidate for stable release branches.
Reviewed-by: Brian Paul <brianp@vmware.com>
Just like we produce from inside the Intel driver, this can help provide
information quickly about FBO incompatibility problems (particularly when
using apitrace replay).
Currently, in driver-marked incompleteness cases, you'll get both the
driver message and the core message on Intel. Until the other drivers are
fixed to produce output, I think this is better than not putting in a
message for driver-marked incomplete.
Reviewed-by: Brian Paul <brianp@vmware.com>
When a fake front buffer is in use, if we request the front buffer
(using screen->dri2.loader->getBuffersWithFormat()), the X server
copies the real front buffer to the fake front buffer and returns the
fake front buffer. We sometimes make redundant requests for the front
buffer (due to using a single counter to track invalidates for both
the front and back buffers), so there's a danger of pending front
buffer rendering getting overwritten when the redundant front buffer
request occurs.
Previous to this patch, intel_update_renderbuffers() worked around
that problem by sometimes doing intel_flush() and intel_flush_front()
before calling intel_query_dri2_buffers(). But it only did the
workaround when the front buffer was bound for drawing; it didn't do
it when the front buffer was bound for reading.
This patch moves the workaround code to intel_query_dri2_buffers(), so
that it happens in exactly the circumstances where it is needed.
This should fix some of the sporadic failures in Piglit tests
fbo-sys-blit and fbo-sys-sub-blit.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The patch that follows will fix a bug that prevents
intel_flush_front() from being called often enough. In doing so, it
will create a situation where intel_flush_front() is called during the
initial call to glXMakeCurrent(). In this circumstance,
ctx->DrawBuffer hasn't been initialized yet and is NULL. Fortunately,
intel->front_buffer_dirty is false, so intel_flush_front() doesn't
actually need to do anything. To avoid a segfault, swap the order of
terms in intel_flush_front()'s if statement.
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
piglit OpenGL ES 3.0/minmax now passes. This was also one of the subcase
failures in OpenGL 3.2/minmax (and still is, because our value is too low
for 3.2, but at least we report what it is).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part of fixing piglit OpenGL ES 3.0/minmax.
v2: s/_gles3/_es3/ in extra name, for consistency (review by Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
Part of fixing piglit OpenGL ES 3.0/minmax.
v2: s/_gles3/_es3/ in extra name, for consistency (review by Matt).
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v1)
These functions must clear all bound layers, not just the first.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Believe it or not but these two are actually the first two functions which
really belong in this file nowadays.
Reviewed-by: Brian Paul <brianp@vmware.com>
Mostly just make sure the layer parameter gets passed through to the right
places (and get clamped, can do this at setup time), fix up clears to
clear all layers and disable opaque optimization. Luckily don't need to
touch the jitted code.
(Clears invoked via pipe's clear_render_target method will not work however
since the pipe_util_clear function used for it doesn't handle clearing
multiple layers yet.)
v2: per Brian's suggestion, prettify var initialization and add some comments,
add assertion for impossible layer specification for surface.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Transfers always use z/depth for layers no matter if it's a 1d or 2d array
texture, we don't follow OpenGL's crazyness there. Luckily this appears to
only be a doc bug, everyone doing the right thing already.
While here also document z/depth parameter for cube map arrays.
v2: fix typo spotted by Eric Anholt
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Checking if array_size is greater than 1 is not enough for single-layered
array textures.
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Moved draw_arrays() to st_draw_feedback.c and removed draw_arrays_instanced().
draw_arrays() was used by nobody else. Now there's just one "draw" entrypoint
into the draw module.
Signed-off-by: Brian Paul <brianp@vmware.com>
This change came from the discovery that the STATIC_ASSERT to check that
the number of register file strings didn't actually work.
Similar changes could be made for the other string arrays in tgsi_string.c
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Removes the special-case suppression of gl_ClipVertex in the VUE map.
Also calculate vertex outcodes for user clip planes based on
gl_ClipVertex if written; otherwise gl_Position.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When clipping triangles against a user clip plane, and gl_ClipVertex
is provided in the vertex, use it instead of hpos.
TODO: A similar change should be made at some point for line clipping.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
