It's just a 32-bit index and offset. We're going to want to use it in
GL as well so stop talking about Vulkan.
Reviewed-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
These correspond roughly to reading/writing OpenCL global pointers. The
idea is that they just take a bare address and load/store from it. Of
course, exactly what this address means is driver-dependent.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Initialize the variable with NULL. Fixes the following
In file included from ../src/compiler/nir/nir_lower_io.c:34:
../src/compiler/nir/nir_lower_io.c: In function ‘nir_lower_explicit_io’:
../src/compiler/nir/nir.h:668:11: warning: ‘addr’ may be used uninitialized in this function [-Wmaybe-uninitialized]
return src;
^~~
../src/compiler/nir/nir_lower_io.c:735:17: note: ‘addr’ was declared here
nir_ssa_def *addr;
^~~~
v2: Avoid using a 'default' case so we get help from the compiler when
new deref types are added. (Lionel)
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
This new pass is for lowering explicitly laid out memory coming in from
SPIR-V or a similar source. It's quite a bit more complicated than the
normal lower_io because we have to be able to handle matrices. The
way the stride information is stored for matrices is awkward and dealing
with row-major matrices is especially painful.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Previously, NIR had a single nir_var_uniform mode used for atomic
counters, UBOs, samplers, images, and normal uniforms. This commit
splits this into nir_var_uniform and nir_var_ubo where nir_var_uniform
is still a bit of a catch-all but the nir_var_ubo is specific to UBOs.
While we're at it, we also rename shader_storage to ssbo to follow the
convention.
We need this so that we can distinguish between normal uniforms and UBO
access at the deref level without going all the way back variable and
seeing if it has an interface type.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The pattern of adding or multiplying an integer by an immediate is
fairly common especially in deref chain handling. This adds a helper
for it and uses it a few places. The advantage to the helper is that
it automatically handles bit sizes for you.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
This deletes support for _var intrinsics and legacy deref chains in
favor of deref instructions. The internals are also reworked a bit to
use deref instructions directly.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
No one is currently using so we can make this change irrespective of
driver. We may use it again in i965 so it's best to pretend to keep it
working.
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This will be removed at the end of the transition, but add some tracking
plus asserts to help ensure that lowering passes are called at the
correct point (pre or post deref instruction lowering) as passes are
converted and the point where lower_deref_instrs() is called is moved.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Acked-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Certain built-in arrays, such as gl_ClipDistance[], gl_CullDistance[],
gl_TessLevelInner[], and gl_TessLevelOuter[] are specified as scalar
arrays. Normal scalar arrays are sparse - each array element usually
occupies a whole vec4 slot. However, most hardware assumes these
built-in arrays are tightly packed.
The new var->data.compact flag indicates that a scalar array should
be tightly packed, so a float[4] array would take up a single vec4
slot, and a float[8] array would take up two slots.
They are still arrays, not vec4s, however. nir_lower_io will generate
intrinsics using ARB_enhanced_layouts style component qualifiers.
v2: Add nir_validate code to enforce type restrictions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I want this function for nir_gather_info(), and realized it's basically
the same as the ones in nir_lower_io().
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
As of 59864e8e02 we just use the location assigned by the front-end and
no longer need this for i965.
Since there were some issues in the logic with assigning arrays the same
driver location if they didn't start at the same location just remove it
and let other drivers implement a solution if needed when they add
ARB_enhanced_layouts support.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that the NIR casting functions have type assertions, we have a bunch of
assertions that aren't needed anymore.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This makes sure we give the correct driver location
for doubles when using component packing. Specifically
it handles packing a dvec3 with a double which is the
only packing scenario allowed which spans across two
locations.
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Now nir_lower_io can optionally produce load_interpolated_input
and load_barycentric_* intrinsics for fragment shader inputs.
flat inputs continue using regular load_input.
v2: Use a nir_shader_compiler_options flag rather than ad-hoc boolean
passing (in response to review feedback from Chris Forbes).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Backends can normally handle shader inputs solely by looking at
load_input intrinsics, and ignore the nir_variables in nir->inputs.
One exception is fragment shader inputs. load_input doesn't capture
the necessary interpolation information - flat, smooth, noperspective
mode, and centroid, sample, or pixel for the location. This means
that backends have to interpolate based on the nir_variables, then
associate those with the load_input intrinsics (say, by storing a
map of which variables are at which locations).
With GL_ARB_enhanced_layouts, we're going to have multiple varyings
packed into a single vec4 location. The intrinsics make this easy:
simply load N components from location <loc, component>. However,
working with variables and correlating the two is very awkward; we'd
much rather have intrinsics capture all the necessary information.
Fragment shader input interpolation typically works by producing a
set of barycentric coordinates, then using those to do a linear
interpolation between the values at the triangle's corners.
We represent this by introducing five new load_barycentric_* intrinsics:
- load_barycentric_pixel (ordinary variable)
- load_barycentric_centroid (centroid qualified variable)
- load_barycentric_sample (sample qualified variable)
- load_barycentric_at_sample (ARB_gpu_shader5's interpolateAtSample())
- load_barycentric_at_offset (ARB_gpu_shader5's interpolateAtOffset())
Each of these take the interpolation mode (smooth or noperspective only)
as a const_index, and produce a vec2. The last two also take a sample
or offset source.
We then introduce a new load_interpolated_input intrinsic, which
is like a normal load_input intrinsic, but with an additional
barycentric coordinate source.
The intention is that flat inputs will still use regular load_input
intrinsics. This makes them distinguishable from normal inputs that
need fancy interpolation, while also providing all the necessary data.
This nicely unifies regular inputs and interpolateAt functions.
Qualifiers and variables become irrelevant; there are just
load_barycentric intrinsics that determine the interpolation.
v2: Document the interp_mode const_index value, define a new
BARYCENTRIC() helper rather than using SYSTEM_VALUE() for
some of them (requested by Jason Ekstrand).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For intrinsics we don't care about, just skip to the next loop iteration
and process the next instruction. We don't want to execute the rest of
the code.
This was a bug in commit cdfc05ea6e.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
I recently refactored this to share code between load and atomic
lowering. loads used intrin->num_components, while atomics used
intrin->dest.ssa.num_components. They should be equivalent, but
Jason wanted me to use the latter. I missed applying his review.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
This is more readable and also offers assertions that protect against
setting const_index fields on the wrong kind of intrinsic.
Suggested by Jason.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The original function was becoming a bit hard to read, with the details
of creating and filling out load/store/atomic atomics all in one
function.
This patch makes helpers for creating each type of intrinsic, and also
combines them with the *_op() helpers, as they're closely coupled and
not too large.
v2: Minor style nits from Jason.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This can't happen, the caller asserts that mode is shader_out or shared.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Both loads and atomics had identical code to rewrite destinations,
and all cases had the same two lines to replace instructions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The load/store/atomic cases all duplicated the get_io_offset code, with
a few tiny differences: stores didn't bother checking for per-vertex
inputs, because they can't be stored to, and atomics didn't check at
all, since shared variables aren't per-vertex.
However, it's harmless to check, and allows us to share more code.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Less typing and word wrapping issues than intrin->variables[0]->var.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These cases had the parameter removed:
nir/nir_lower_vec_to_movs.c: In function ‘try_coalesce’:
nir/nir_lower_vec_to_movs.c:124:66: warning: unused parameter ‘shader’ [-Wunused-parameter]
try_coalesce(nir_alu_instr *vec, unsigned start_idx, nir_shader *shader)
^
nir/nir_lower_io.c: In function ‘load_op’:
nir/nir_lower_io.c:147:32: warning: unused parameter ‘state’ [-Wunused-parameter]
load_op(struct lower_io_state *state,
^
These cases had the parameter (void) silenced because the parameter was
necessary for an interface:
nir/glsl_to_nir.cpp:1900:32: warning: unused parameter 'ir' [-Wunused-parameter]
nir_visitor::visit(ir_barrier *ir)
^
nir/nir.c: In function ‘remove_use_cb’:
nir/nir.c:802:35: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_use_cb(nir_src *src, void *state)
^
nir/nir.c: In function ‘remove_def_cb’:
nir/nir.c:811:37: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_def_cb(nir_dest *dest, void *state)
^
Number of total warnings in my build reduced from 2543 to 2538
(reduction of 5).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_function(\([^,]*\),\s*\([^,]*\))/nir_foreach_function(\2, \1)/
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
