Intel Gen9 GPUs have hardware ASTC support, but have a bug where they
don't handle denormalized values in void extent blocks correctly. This
isn't that hard to work around - on upload, we can detect such blocks,
and flush any denorms to zero. Because we're altering the data behind
the application's back, and applications can theoretically ask to
download the original unaltered image data, we unfortunately need to
maintain shadow copies of the data.
To make sure that we don't accidentally skip the void-extent flushing
via any fast-upload paths, and support download correctly, we plug this
into the st/mesa compressed texture format fallback paths, which store
a CPU copy of the original image data, and upload altered data.
This is unfortunately common code for what's likely to be a single
driver's issue (on a single generation), but it beats replicating an
entire framework we already have inside the driver.
Fixes dEQP-GLES3.functional.texture.compressed.astc.void_extent_ldr.*
using iris on Intel Gen9 GPUs.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4167
Reviewed-by: Emma Anholt <emma@anholt.net>
Acked-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Acked-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21943>
Following PAL's implementation, this patch avoids allocating shader code
buffers in BAR and use SDMA to upload them to invisible VRAM
directly.
For some games like HZD, shaders can take as much as 400MB, which exceeds
the non-resizable BAR size (256MB) and cause inconsistent spilling
behavior. The kernel will normally move these to invisible VRAM on its own,
but there are a few cases that it does not reliably happen. This patch does
the moving explicitly in the driver to ensure predictable results.
In this patch, we upload the shaders synchronously; so the shader will be
ready as soon as vkCreate*Pipeline returns. A following patch will make
this asynchronous and don't block until we see a use of the pipeline.
As a side effect, when SQTT is used we now store the shaders on a cacheable
buffer which would speed up writing the trace to the disk.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16271>
Connor Abbott wrote a nice explanation of how instance divisors work on Mali.
Let's add it to the driver docs instead of letting it languish in a forgotten
header file.
This is mostly pasted from the existing header in tree, with a few local changes
applied.
Signed-off-by: Alyssa Rosenzweig <alyssa@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/20445>
XE architecture enables many more metrics, perhaps too many for
the average user. Reduce reported metrics to smaller subset,
known as non-extended metrics, by default. Can re-enable extended
metrics with env var INTEL_EXTENDED_METRICS=1
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21841>
Implement buffer textures in full generality. There are a few issues here:
* OpenGL requires buffer textures support a minimum size of 65536 elements,
however 1D textures in AGX are (at most) 8192 elements.
* OpenGL 4.0 (and OpenGL ES) require buffer textures to support the "RGB32"
texture formats. These are 3 packed channels of 32-bits each. In general,
non-power-of-two texel sizes are problematic. AGX does not support any such
formats and we rely on the GL frontend to lower to a padded format (RGBX) if
necessary. Such a lowering cannot work for buffer textures, however, so we
need to find a way to implement RGB32 buffer textures.
We solve these issues in the follow way:
* Use 2D texture descriptors for buffer textures, with a large fixed
power-of-two size along one axis. Then large texel indices may be accessed at
a small vec2 texel coordinate, and since the fixed dimension is a
power-of-two, that vector may be recovered by simply shifting and masking.
This effectively avoids size restriction. We do need to clamp texel indices to
the buffer size to avoid faulting on OOB reads, since we may read past the end
of the buffer (if the app binds a non-page-aligned offset into the buffer).
* Use a general purpose memory load for RGB32 buffer textures. Lower the texture
load instruction to a memory load from the buffer and some address arithmetic.
There's no format conversion needed for RGB32, other than maybe filling in a
format-appropriate alpha, so this is straightforward. Again, we need to clamp
the texel index for robustness with OOB reads.
Each of these solutions brings its own problem.
* Using 2D textures instead of 1D requires physically rounding up the buffer
size when packing the descriptor, so we can no longer implement textureSize()
by reading off the texture descriptor like normal.
* We don't know at compile-time whether a given texture load will read from an
RGB32 buffer texture or not, so we need to emit code for both. In Vulkan, we
can't key the shader to this property, either, since it's descriptor set state
and not pipeline state.
And each of these problems in turn brings its own solution:
* The texture descriptor is linear, so the "compression buffer address" field is
ignored by the hardware. We stash the real buffer size there so that
textureSize becomes a load from the texture descriptor like usual, without
requiring a sideband (which would complicate bindless textures).
* If we determine a texture descriptor contains RGB32 data, then it will never
be interpreted by the hardware and hence does not need to be a valid texture
descriptor. So, we extend the hardware's format enum to contain a
software-defined RGB32 format enum. Then, when lowering texture buffer loads,
we either read it as a typed RGB32 memory load or as a texture load depending
on the value of the format field in the texture descriptor.
All of this is accomplished with a big NIR pass generating a pile of strange
looking code. But it should be good enough in practice for this silly feature.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21672>
When enabled, on gfx12 plus, we will add the sync nop instruction after
each instruction to make sure that current instruction depends on the
previous instruction explicitly.
This option will help us to get a hint if something is missing or broken
in software scoreboard pass.
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21797>
I used an old version of the script to generate the notes, which didn't
generate this. It is being kept separate instead of being squashed so
that the commits on the 23.0 branch and those on main match
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21500>
The previous lowering was insufficient in two areas:
* No support for indirection. This is required for dynamically indexing into
UBOs, SSBOS, etc in OpenGL ES 3.2
* Only a single table supported. Multiple tables are required to implement
indirect dispatch/draws efficiently, in order to bind the indirect buffer as
uniforms.
The first problem is addressed here by reworking the lowering of
system values to happen in NIR, decoupled from the uniform register assignment
details, such that we can handle 1:n lowerings in a straightforward way.
Namely, indirect sysvals are lowered to indirect memory loads relative to the
base address of the sysval table, where the table address is itself pushed as a
(direct) sysval.
The second problem is addressed in this patch by generalizing to multiple
uniform tables.
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21703>
Strictly, this extension was already advertised, but it didn't seem nice to mark
it DONE when there was no sync support in the driver whatsoever. Mark it done
now that we do have proper explicit sync (well, in conjunction with the "add
Linux UAPI" patches that are blocked on getting the kernel driver upstream, but
that's needed for *any* of these extensions to be there!)
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21676>
Now that turnip can support multiple kernel-mode drivers in a single
build, re-work the meson option to have a single list of KMDs, rather
than special options to enable kgsl for turnip or virtio for gallium.
It is temporarily a bit awkward as gallium does not yet support kgsl
and turnip does not yet support virtio. But both of those are planned
or in-progress, so long term a single list is the most sensible option.
TODO freedreno/drm support to build with only virtio support.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21394>
Seems this document has moved since last we updated this link. But
instead of chasing the exact CDN link, let's link to the document on
Intel's website. There's both a download-link there, as well as the
ability to read the document online.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21448>
The script is broken, and nobody noticed so it wasn't used much.
Meson has had support for printing the options by pointing to the source
dir for a while (not sure the exact version though) so I think we can
just recommend users do that.
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21469>
