It was only useful for st/egl, although I've never got to merging the
pipe-loader and inline-helpers before it was removed. There are no users
for it ATM.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Do not iterate and (attempt to) open the render device, if we're over
the requested number of devices.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Render nodes have been around for quite some time. Removing support via
the master/primary node allows us to clean up the conditional
compilation and simplify the build greatly.
For example currently we the pipe-loader, which explicitly links against
xcb and friends (for X auth) if found at compile-time. That
would cause problems as one will be forced to use X/xcb, even if it's a
headless system that is used for opencl.
v2: Clarify the linking topic in the commit message.
Cc: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
This adds the translation from TGSI to AMDGPU llvm backend, for the
64-bit opcodes. The backend pretty much handles everything for us
fine. There is one patch required for SI DFRAC support, that I know
off.
[airlied: fixed missing comma, updated relnotes]
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
temp_reg needs to be last, as we increment things
away from it, otherwise on cayman some tests were overwriting
the index regs.
Fixes 2 piglit with ARB_gpu_shader5 forced on cayman.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cayman needs a different method to upload the CF IDX0/1
This fixes 31 piglits when ARB_gpu_shader5 is forced on
with cayman.
Reviewed-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When binding a layered texture, the layer is already 0. There's no need
to special case this.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
This ports over Chris Forbes' equivalent fixes in gen7_misc_state.c
from commit 77d55ef481.
No Piglit changes on Sandybridge.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Color clears can be performed via two separate shaders - one is the
generic "meta clear" shader (in meta.c); the other is the i965 specific
"repclear" shader (in brw_meta_fast_clear.c).
Giving them separate names makes them distinguishable when reading
INTEL_DEBUG=shader_time output.
v2: Call it "meta repclear", as suggested by Jason.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
Paul's original code had emit_control_data_bits() skip the URB write if
vertex_count was 0. This meant wrapping every control data write in a
conditional write.
We accumulate control data bits in a single UD (32-bit) register. For
simple shaders that don't emit many vertices, the control data header
will be <= 32-bits long, so we only need to write it once at the end of
the shader.
For shaders with larger headers, we write out batches of control data
bits at EmitVertex(), when (vertex_count * bits_per_vertex) % 32 == 0.
On the first EmitVertex() call, the above expression will evaluate to
true simply because vertex_count == 0. But we want to avoid emitting
the control data bits, because we haven't accumulated 32-bits worth yet.
In other words, the vertex_count != 0 check is really only necessary in
the EmitVertex() batching case, not the end-of-thread case.
This saves a CMP/IF/ENDIF in every shader that uses EndPrimitive() or
multiple streams. The only downside is that a shader which emits no
vertices at all will execute an additional URB write---but such shaders
are pointless and not worth optimizing.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
When the new hash table implementation was added to Mesa it claimed to be much
faster, see commits 35fd61bd99 and 72e55bb688.
The set implementation follows the same implementation strategy so this should
be faster and there was no need to store a data field.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Don't assume that $(top_srcdir)/.git is a directory. It may be a
gitlink file [1] if $(top_srcdir) is a submodule checkout or a linked
worktree [2].
[1] A "gitlink" is a text file that specifies the real location of
the gitdir.
[2] Linked worktrees are a new feature in Git 2.5.
Cc: "10.6, 10.5" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
If we split addr/pred, the original instruction could have originated
from a different block. If we don't fixup the block ptr we hit asserts
later (in debug builds).
NOTE: perhaps we don't want to try to preserve addr/pred reg's across
block boundaries.. this at least needs some thought in case addr/pred
writes end up inside a conditional block..
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The address and predicate register are special, they don't get assigned
in RA. So do a better job of ignoring them rather than hitting later
asserts.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Acked-by: Eric Anholt <eric@anholt.net>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Acked-by: Chia-I Wu <olvaffe@gmail.com>
Some, but not all, state trackers will explicitly unref (and set to
NULL) the previous *fence before calling pipe->flush(). So driver
should use fence_ref() which will unref the old fence if not NULL.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
XA was never unref'ing last_fence in the various call paths to
pipe->flush(). Add this to xa_context_flush() and update the other
open-coded calls to pipe->flush() to use xa_context_flush() instead.
This fixes a memory leak reported with xf86-video-freedreno.
Reported-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Cc: "10.5 10.6" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
After tearing it out another level or two, and just passing the key and
vp directly, we can finally remove this struct. It also eliminates a
pointless memcpy() of the key.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
At this point, the brw_vs_compile structure only contains the key and
gl_vertex_program pointer. We may as well pass and store them directly;
it's simpler and more convenient (key-> instead of vs_compile->key...).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Nothing outside of vec4_visitor uses it, so we may as well keep it
internal.
Commit db9c915abc for the vec4 backend.
(The empty class will be going away soon.)
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This is more consistent with how we do it in the FS backend, and reduces
a tiny bit of duplication. It'll also allow for a bit more tidying.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
This patch makes us only issue the performance warning about register
spilling if we actually spilled registers. We also use scratch space
for indirect addressing and the like.
This is basically commit c51163b0cf for
the vec4 backend.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Jason plumbed this through a while back in the FS backend, but
apparently we were just passing NULL in the vec4 backend.
This patch passes brw in as intended.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Adding new shader stages to a switch statement is less confusing than an
if-else-if ladder where all but the first case are fragment shader
specific (but don't claim to be).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
