The LLVM backend can now be enabled for r600g by using the
--enable-r600-llvm-compiler configure flag. If you configure with this
flag, you can still use the default compiler by setting the envrionment
variable R600_USE_LLVM=0
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise HAVE_LLVM won't be included in the $(DEFINES) variable for
Automake generated Makefiles.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This runs optimization-test and produces the usual automake test
output, which may be interesting to automated build systems.
This doesn't convert the tests to be individually exposed to the
automake runner, because automake doesn't like wildcards (due to being
nonportable in make, not that we care).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prevents this error with Automake 1.9:
src/gallium/drivers/Makefile.am: C objects in subdir but
`AM_PROG_CC_C_O' not in `configure.ac'
autoreconf: automake failed with exit status: 1
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The primary motivation for this rewrite was to have a maintainable driver
going forward, as nvfx was quite horrible in a lot of ways.
The driver is heavily based on the design of the nv50/nvc0 3d drivers we
already have, and uses the same common buffer/fence code. It also passes
a HEAP more piglit tests than nvfx did, supports a couple more features,
and a few more to come still probably.
The CPU footprint of this driver is far far less than nvfx, and translates
into far greater framerates in a lot of applications (unless you're using
a CPU that's way way newer than the GPUs of these generations....)
Basically, we once again have a maintained driver for these chipsets \o/
Feel free to report bugs now!
This driver hasn't been maintained properly for a very long time, and for
many very good reasons. It's horrible.
A new driver supporting these chipsets will appear with the commits that
port vieux/nv50/nvc0 to libdrm_nouveau-2.0.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This commit adds initial support for acceleration
on SI chips. egltri is starting to work.
The SI/R600 llvm backend is currently included in mesa
but that may change in the future.
The plan is to write a single gallium driver and
use gallium to support X acceleration.
This commit contains patches from:
Tom Stellard <thomas.stellard@amd.com>
Michel Dänzer <michel.daenzer@amd.com>
Alex Deucher <alexander.deucher@amd.com>
Vadim Girlin <vadimgirlin@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following commits were squashed in:
======================================================================
radeonsi: Remove unused winsys pointer
This was removed from r600g in commit:
commit 96d882939d
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Feb 17 01:49:49 2012 +0100
gallium: remove unused winsys pointers in pipe_screen and pipe_context
A winsys is already a private object of a driver.
======================================================================
radeonsi: Copy color clamping CAPs from r600
Not sure if the values of these CAPS are correct for radeonsi, but the
same changed were made to r600g in commit:
commit bc1c836938
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Jan 23 03:11:17 2012 +0100
st/mesa: do vertex and fragment color clamping in shaders
For ARB_color_buffer_float. Most hardware can't do it and st/mesa is
the perfect place for a fallback.
The exceptions are:
- r500 (vertex clamp only)
- nv50 (both)
- nvc0 (both)
- softpipe (both)
We also have to take into account that r300 can do CLAMPED vertex colors only,
while r600 can do UNCLAMPED vertex colors only. The difference can be expressed
with the two new CAPs.
======================================================================
radeonsi: Remove PIPE_CAP_OUTPUT_READ
This CAP was dropped in commit:
commit 04e3240087
Author: Marek Olšák <maraeo@gmail.com>
Date: Thu Feb 23 23:44:36 2012 +0100
gallium: remove PIPE_SHADER_CAP_OUTPUT_READ
r600g is the only driver which has made use of it. The reason the CAP was
added was to fix some piglit tests when the GLSL pass lower_output_reads
didn't exist.
However, not removing output reads breaks the fallback for glClampColorARB,
which assumes outputs are not readable. The fix would be non-trivial
and my personal preference is to remove the CAP, considering that reading
outputs is uncommon and that we can now use lower_output_reads to fix
the issue that the CAP was supposed to workaround in the first place.
======================================================================
radeonsi: Add missing parameters to rws->buffer_get_tiling() call
This was changed in commit:
commit c0c979eebc
Author: Jerome Glisse <jglisse@redhat.com>
Date: Mon Jan 30 17:22:13 2012 -0500
r600g: add support for common surface allocator for tiling v13
Tiled surface have all kind of alignment constraint that needs to
be met. Instead of having all this code duplicated btw ddx and
mesa use common code in libdrm_radeon this also ensure that both
ddx and mesa compute those alignment in the same way.
v2 fix evergreen
v3 fix compressed texture and workaround cube texture issue by
disabling 2D array mode for cubemap (need to check if r7xx and
newer are also affected by the issue)
v4 fix texture array
v5 fix evergreen and newer, split surface values computation from
mipmap tree generation so that we can get them directly from the
ddx
v6 final fix to evergreen tile split value
v7 fix mipmap offset to avoid to use random value, use color view
depth view to address different layer as hardware is doing some
magic rotation depending on the layer
v8 fix COLOR_VIEW on r6xx for linear array mode, use COLOR_VIEW on
evergreen, align bytes per pixel to a multiple of a dword
v9 fix handling of stencil on evergreen, half fix for compressed
texture
v10 fix evergreen compressed texture proper support for stencil
tile split. Fix stencil issue when array mode was clear by
the kernel, always program stencil bo. On evergreen depth
buffer bo need to be big enough to hold depth buffer + stencil
buffer as even with stencil disabled things get written there.
v11 rebase on top of mesa, fix pitch issue with 1d surface on evergreen,
old ddx overestimate those. Fix linear case when pitch*height < 64.
Fix r300g.
v12 Fix linear case when pitch*height < 64 for old path, adapt to
libdrm API change
v13 add libdrm check
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
======================================================================
radeonsi: Remove PIPE_TRANSFER_MAP_PERMANENTLY
This was removed in commit:
commit 62f44f670b
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Mar 5 13:45:00 2012 +0100
Revert "gallium: add flag PIPE_TRANSFER_MAP_PERMANENTLY"
This reverts commit 0950086376.
It was decided to refactor the transfer API instead of adding workarounds
to address the performance issues.
======================================================================
radeonsi: Handle PIPE_VIDEO_CAP_PREFERED_FORMAT.
Reintroduced in commit 9d9afcb5ba.
======================================================================
radeonsi: nuke the fallback for vertex and fragment color clamping
Ported from r600g commit c2b800cf38.
======================================================================
radeonsi: don't expose transform_feedback2 without kernel support
Ported from r600g commit 15146fd1bc.
======================================================================
radeonsi: Handle PIPE_CAP_GLSL_FEATURE_LEVEL.
Ported from r600g part of commit 171be75522.
======================================================================
radeonsi: set minimum point size to 1.0 for non-sprite non-aa points.
Ported from r600g commit f183cc9ce3.
======================================================================
radeonsi: rework and consolidate stencilref state setting.
Ported from r600g commit a2361946e7.
======================================================================
radeonsi: cleanup setting DB_SHADER_CONTROL.
Ported from r600g commit 3d061caaed.
======================================================================
radeonsi: Get rid of register masks.
Ported from r600g commits
3d061caaed13b646ff40754f8ebe73f3d4983c5b..9344ab382a1765c1a7c2560e771485edf4954fe2.
======================================================================
radeonsi: get rid of r600_context_reg.
Ported from r600g commits
9344ab382a1765c1a7c2560e771485edf4954fe2..bed20f02a771f43e1c5092254705701c228cfa7f.
======================================================================
radeonsi: Fix regression from 'Get rid of register masks'.
======================================================================
radeonsi: optimize r600_resource_va.
Ported from r600g commit 669d8766ff.
======================================================================
radeonsi: remove u8,u16,u32,u64 types.
Ported from r600g commit 78293b99b2.
======================================================================
radeonsi: merge r600_context with r600_pipe_context.
Ported from r600g commit e4340c1908.
======================================================================
radeonsi: Miscellaneous context cleanups.
Ported from r600g commits
e4340c1908a6a3b09e1a15d5195f6da7d00494d0..621e0db71c5ddcb379171064a4f720c9cf01e888.
======================================================================
radeonsi: add a new simple API for state emission.
Ported from r600g commits
621e0db71c5ddcb379171064a4f720c9cf01e888..f661405637bba32c2cfbeecf6e2e56e414e9521e.
======================================================================
radeonsi: Also remove sbu_flags member of struct r600_reg.
Requires using sid.h instead of r600d.h for the new CP_COHER_CNTL definitions,
so some code needs to be disabled for now.
======================================================================
radeonsi: Miscellaneous simplifications.
Ported from r600g commits 38bf276348 and
b0337b679a.
======================================================================
radeonsi: Handle PIPE_CAP_QUADS_FOLLOW_PROVOKING_VERTEX_CONVENTION.
Ported from commit 8b4f7b0672.
======================================================================
radeonsi: Use a fake reloc to sleep for fences.
Ported from r600g commit 8cd03b933c.
======================================================================
radeonsi: adapt to get_query_result interface change.
Ported from r600g commit 4445e170be.
This option allows targets to link against the LLVM shared library
instead of the static libs. With LLVM 2.9, his saves ~11 MB for each of
the r300 target libraries.
They aren't winsys of their own,
just help dealing with them.
v2: add some more comments in vl_winsys.h
Signed-off-by: Christian König <deathsimple@vodafone.de>
This fixes a build problem where EGL links to libgbm.la, which encodes
a relative path to it's libglapi.so dependency. The relative path
breaks when the linker tries to resolve it from src/egl/main instead
of src/gbm. Typically we silently fall back to the system
libglapi.so, which is wrong and breaks when there isn't one.
Morale of the story: don't mix mklib and libtool.
This should speed things up a bit, but also shows
some bugs with the kernel implementation.
v2: require xcb-dri2 version 1.8
Signed-off-by: Christian König <deathsimple@vodafone.de>
The drivers/ walk-through-subdirs makefile is converted as well so I
didn't need to keep EGL_DRIVERS_DIRS along with the per-driver
HAVE_EGL_DRIVER_WHATEVER.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The default case code was set up in a separate way, while this makes
it more normal. I wanted to add code to the explicit x11 platform and
default x11 platform cases in the next commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The xvmc state tracker is completely seperate and
doesn't shares code or anything else with the
xorg state tracker.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Tiled surface have all kind of alignment constraint that needs to
be met. Instead of having all this code duplicated btw ddx and
mesa use common code in libdrm_radeon this also ensure that both
ddx and mesa compute those alignment in the same way.
v2 fix evergreen
v3 fix compressed texture and workaround cube texture issue by
disabling 2D array mode for cubemap (need to check if r7xx and
newer are also affected by the issue)
v4 fix texture array
v5 fix evergreen and newer, split surface values computation from
mipmap tree generation so that we can get them directly from the
ddx
v6 final fix to evergreen tile split value
v7 fix mipmap offset to avoid to use random value, use color view
depth view to address different layer as hardware is doing some
magic rotation depending on the layer
v8 fix COLOR_VIEW on r6xx for linear array mode, use COLOR_VIEW on
evergreen, align bytes per pixel to a multiple of a dword
v9 fix handling of stencil on evergreen, half fix for compressed
texture
v10 fix evergreen compressed texture proper support for stencil
tile split. Fix stencil issue when array mode was clear by
the kernel, always program stencil bo. On evergreen depth
buffer bo need to be big enough to hold depth buffer + stencil
buffer as even with stencil disabled things get written there.
v11 rebase on top of mesa, fix pitch issue with 1d surface on evergreen,
old ddx overestimate those. Fix linear case when pitch*height < 64.
Fix r300g.
v12 Fix linear case when pitch*height < 64 for old path, adapt to
libdrm API change
v13 add libdrm check
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Refine 80aa78142d "dri: make sure to build libdricommon.la"
so we don't build libdricommon if we aren't building a dri driver which needs it (i.e.
if we are just building swrast)
In particular, this restores the ability to build the swrast dri driver without having to
have a xf86drm.h
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Fixes the build of builtin_compiler on my 32-bit build where xcb-dri2
is in a custom prefix but the custom prefix flags weren't available.
It shouldn't have been in LIBS anyway.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Needed for automake. Using AC_PROG_PATH(bison/flex) causes automake to
fail to build .y and .l files.
It is up to the builder to use bison/flex instead of yacc/lex.
Reviewed-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Matt Turner <mattst88@gmail.com>
After the removal of the dri driver link test, this should help avoid
the original problem that it was designed to catch: The warning about
a missing prototype due to typoing a function name scrolling by in the
Mesa build spew, and you not noticing until you try to run an
application and it falls back to swrast.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We just prefix the $CLANG environment variable in configure.ac with acv_mesa_
Found by: tinderbox
Signed-off-by: Jeremy Huddleston <jeremyhu@apple.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This has the drawback that when creating configure for
distribution, wayland needs to be available for the packager.
Also the the macros has the wayland prefix hardcoded, so
we cant copy it in mesa right now.
