The _mesa_get_current_tex_object() function is now used everywhere that
_mesa_select_tex_object() was formerly used.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
As far as I know, this should be safe. If not, we have to decide whether
to have variable lookup of the functions, or just drop support for .so.0
(which is a year and a half old it looks like)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74127
Reviewed-by: Matt Turner <mattst88@gmail.com>
Updates to non-banked registers, CP_LOAD_STATE, etc, need a WFI if there
is potentially pending rendering. Track this better, and add fd_wfi()
calls everywhere that might potentially need CP_WAIT_FOR_IDLE.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Gallium can leave const buffers bound above what is used by the current
shader. Which can have a couple bad effects:
1) write beyond const space assigned, which can trigger HLSQ lockup
2) double emit of immed consts, first with bound const buffer vals
followed by with actual immed vals. This seems to be a sort of
undefined condition.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Currently lowers the following instructions:
DST, XPD, SCS, LRP, FRC, POW, LIT, EXP, LOG, DP4,
DP3, DPH, DP2
translating these into equivalent simpler TGSI instructions.
This probably should be moved to util so other drivers can use
it, but just adding under freedreno for now so that I can clear
out a lot of the lowering code in a3xx compiler before beginning
to add new compiler.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
The ctx should hold ref to dev to avoid problems if screen is destroyed
before ctx. Doesn't really fix the egl/glx issues, but at least it
prevents things from getting much worse.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
In the final revision of my gen8_generator patch, I updated the MATH
instruction's assertion from (dst.hstride == 1) to check that source and
destination hstride matched. Unfortunately, I didn't test this enough,
and many Piglit tests fail this test.
The documentation indicates that "scalar source is also supported",
which we believe means <0,1,0> access mode (hstride == 0). If hstride
is non-zero, then it must match the destination register.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This puts the PCI IDs in place so it's easy to enable support. However,
it doesn't actually enable support since it's very preliminary still,
and a few crucial pieces (such as BLORP) are still missing.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
Eric believes this to be wrong and unnecessary, as the command is
supposed to emit an implicit rectangle primitive. However, empirically
the pixel pipeline is completely unreliable without it. So for now, it
stays until someone comes up with a better solution.
We'll need to do better than this when we implement multisampling, HiZ,
or fast clears...but for now, this will do.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
This is quite similar to the Gen7 code. The main changes:
- 48-bit relocations
- Thread count is specified as U/2-1 instead of U-1.
- An extra DWord (DW9) with clip planes, URB entry output length/offsets
- We need to program the "Expected Vertex Count" (VerticesIn)
v2: Set the number of binding table entries so they can be prefetched
(requested by Eric Anholt).
v3: Add a WARN_ONCE for a missing workaround.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
On previous platforms, 3DSTATE_MULTISAMPLE contained the number of
samples, pixel location, and the positions of each sample within a pixel
for each multisampling mode (4x and 8x). It was also a non-pipelined
command, presumably since changing the sample positions is fairly
drastic.
Broadwell improves upon this by splitting the sample positions out into
a separate non-pipelined state packet, 3DSTATE_SAMPLE_PATTERN. With
that removed, 3DSTATE_MULTISAMPLE becomes a pipelined state packet.
Broadwell also supports 2x and 16x multisampling, in addition to the 4x
and 8x supported by Gen7. This patch, however, does not implement 2x
and 16x.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The amount of cut and paste from Gen7 is rather ugly, and should
probably be cleaned up in the future. Even the Gen7 code is in need of
some tidying though; many of the function parameters aren't used on
platforms that use level/layer rather than tile offsets. Tidying both
can be left to a future patch series. This at least gets things going.
v2: Rebase on Paul's rename of NumLayers -> MaxNumLayers.
v3: Shift QPitch by 2 when storing it in the packet. Bits 14:0 store
bits 16:2 of the actual value. Fixes tests.
v4: Add missing stencil buffer QPitch.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Eric Anholt <eric@anholt.net>
v2: Allow logic ops on all surface types. The UNORM restriction was
lifted with Haswell and I simply hadn't noticed. Also, add missing
BRW_NEW_STATE_BASE_ADDRESS dirty bit. Both caught by Eric Anholt.
v3: Fix swapped per-RT DWord pairs. Eliminates bizarre hacks.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
It has additional fields to support clipping to the viewport even if
guardband clipping is enabled.
v2: Update for viewport array changes.
v3: No, seriously, update for viewport array changes.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
v2: Add missing SCS setting in gen8_emit_buffer_surface_state (caught by
Eric Anholt).
v3: Use stored QPitch rather than recomputing it.
v4: Shift QPitch by 2 when setting it in the packet; bits 14:0 store
bits 16:2 of the actual value (fixes myriads of cube and array
texturing tests). Also, only enable cube face bits for cubemaps
(matches Chris Forbes' commit on master). Port to use offset64.
v5: s/gl_format/mesa_format/g
v6: Fix DW5 of renderbuffer state, which neglected to subtract
irb->mt->first_level. Use vertical_alignment() rather than
hardcoding 4. Use ffs for multisample counts rather than a
large switch statement (all caught/suggested by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Unlike on Gen7, we can directly set the offset via the state packet.
We also -have- to: the kernel SOL reset code won't work anymore.
v2: Fix copy and paste mistake in buffer stride setup; drop stale
comment (caught by Eric Anholt). Add a perf_debug for missing
MOCS setup.
v3: Rebase on Paul Berry's changes to CurrentVertexProgram.
v4: Fix SO Write Offset handling. We need to set bits 20 and 21 so the
hardware both loads and saves the offset. There's also a
restriction that 3DSTATE_SO_BUFFER can only be programmed once per
buffer between primitives, so the "reset to zero" code needed
reworking. Fixes most of the transform feedback Piglit tests.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v2]
v2: Also disable 3DSTATE_WM_CHROMAKEY for safety.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v1]
Broadwell's winding order, polygon fill, and viewport Z test fields have
moved to DWord 1 of 3DSTATE_RASTER.
v2: Add a perf_debug for a future optimization and improve commit
message (both suggested by Eric Anholt).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Emit a dummy 3DSTATE_VF_SGVS packet when not needed.
v3: Add WARN_ONCE and perf_debugs requested by Eric Anholt.
v4: Program 3DSTATE_SGVS even in the no-elements case so gl_VertexID
continues working. Fix 3DSTATE_VF_INSTANCING to not use an
element index to access the buffers array. Some ARB_draw_indirect
prep work.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
v2: Fix missing "change" bit on instruction state base address
(caught by Haihao Xiang).
v3: Add a perf_debug for missing MOCS setup, requested by Eric.
v4: Fix buffer sizes. The value, specified at bit 12 and up, is
actually measured in 4k pages. We need to round up to the
next multiple of 4k.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v3]
Reviewed-by: Matt Turner <mattst88@gmail.com> [v4]
v2: Fix setting of GEN8_PSX_ATTRIBUTE_ENABLE after rebases.
v3: Add missing binding table entry counts. Don't worry about alpha
testing or alpha to coverage when setting the "Kill Pixel" bit;
those are specified in 3DSTATE_PS_BLEND (caught by Eric Anholt).
Drop unused _NEW_BUFFERS. Tidy comments.
v4: Rebase on Paul Berry's changes to CurrentFragmentProgram.
v5: Re-enable line stippling. It doesn't crash or anything.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v3]
v2: Remove incorrect MOCS shifts; rename urb_entry_write_offset to
urb_entry_output_offset to closer match the documentation.
v3: Only emit a non-zero constant buffer read length when active.
v4: Add missing binding table counts (caught by Eric).
v5: Rebase on Paul Berry's changes to CurrentVertexProgram.
v6: Drop bogus SBE read length/offset field code. We were programming
the wrong values, and our 3DSTATE_SBE code overrides any value we
put here anyway with the correct one.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v4]
v2: Only set GEN8_PS_BLEND_HAS_WRITEABLE_RT if color buffer writes are
enabled (caught by Eric Anholt).
v3: Set non-blending flags (writeable RT, alpha test, alpha to coverage)
for integer formats too. +14 Piglits.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v2]
v2: Use stencil->_WriteEnabled instead of setting
GEN8_WM_DS_STENCIL_BUFFER_WRITE_ENABLE twice (suggested by Eric).
v3: Mask stencil->WriteMask and stencil->ValueMask with 0xff. The field
is only 8-bits, so we'd trip the new SET_FIELD assertion when core
Mesa gave us a value like 0xFFFFFFFF. The Gen7 code uses structure
field widths to implicitly do this truncation. Fixes Piglit tests.
v4: Use uint32_t for dw1/dw2, not uint8_t. Worst. Typo. Ever.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net> [v2]
The attribute override portion of 3DSTATE_SBE was split out into
3DSTATE_SBE_SWIZ; various bits of 3DSTATE_SF were split out into
3DSTATE_RASTER.
v2: Set Force URB Read Offset bit. Eventually the URB read offset
should be set in 3DSTATE_VS, but that will require some refactoring.
v3: Rebase on viewport array changes.
v4: Improve comments about URB read length/offset overrides.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
I haven't investigated whether these are necessary on Broadwell or not,
but for paranoia's sake, we may as well continue doing them for now.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
It's going to diverge significantly. Starting out with a copy allows
future patches to change atoms one by one.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
The code re-enabling denorms for small float formats did not recognize
this format due to format handling hacks (mainly, the lp_type doesn't have
the floating bit set).
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
