It's a bit hard to measure because it almost gets lost in the noise,
but this seemed to help Dota 2 by a percent or two on my Broadwell
GT3e desktop.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This helps Dota 2 on Broadwell by 8-9%. I also hacked up the driver and
used the Sascha "shadowmapping" demo to get some results. Setting
uses_kill to true dropped the framerate on the demo by 25-30%. Enabling
the PMA fix brought it back up to around 90% of the original framerate.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Vulkan doesn't have a stencilWriteEnable bit like it does for depth.
Instead, you have a stencil mask. Since the stencil mask is handled as
dynamic state, we have to handle it later during command buffer
construction. This, combined with a later commit, seems to help Dota2
on my Broadwell GT3e desktop by a couple percent because it allows the
hardware to move the depth and stencil writes to early in more cases.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
This changes the way anv_entrypoints_gen.py works from generating a
table containing every single entrypoint in the XML to just the ones
that we actually need. There's no reason for us to burn entrypoint
table space on a bunch of NV extensions we never plan to implement.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Even though we supported both coherent and non-coherent memory types, we
effectively forced apps to use the coherent types by accident. Found by
inspection, only compile tested.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
This allows shaders to write to storage images declared with unknown
format if they are decorated with NonReadable ("writeonly" in GLSL).
Previously an image view would always use a lowered format for its
surface state, however when a shader declares a write-only image, we
should use the real format. Since we don't know at view creation time
whether it will be used with only write-only images in shaders, create
two surface states using both the original format and the lowered
format. When emitting the binding table, choose between the states
based on whether the image is declared write-only in the shader.
Tested on both Sascha Willems' computeshader sample (with the original
shaders and ones modified to declare images writeonly and omit their
format qualifiers) and on our own shaders for which we need support
for this.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This makes our driver robust to changes in spirv_to_nir which would set
this flag on the variable. Right now, our driver relies on spirv_to_nir
*not* setting var->data.image.write_only for correctness. Any patch
which implements the shaderStorageImageWriteWithoutFormat will need to
effectively revert this commit.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
BLORP is now smart enough to handle any swizzle (even those that contain
ZERO or ONE) in a reasonable manner. Just let BLORP handle it. This
fixes the following Vulkan CTS tests on Haswell:
- dEQP-VK.api.image_clearing.clear_color_image.1d_b4g4r4a4_unorm_pack16
- dEQP-VK.api.image_clearing.clear_color_image.2d_b4g4r4a4_unorm_pack16
- dEQP-VK.api.image_clearing.clear_color_image.3d_b4g4r4a4_unorm_pack16
Reviewed-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Set 3DSTATE_WM/ThreadDispatchEnable bit on/off based on the same
conditions as used in the GL version.
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Compressing a render target and decompressing it in the same
single-subpass render pass may waste bandwidth. While this may be
beneficial in some circumstances, it does not help in all. Reclaims
about 1.95% FPS for Dota 2 on some configurations.
v2 (Jason Ekstrand):
- Provide a more thorough comment
- Enable CCS_D for input attachments
v3 (Jason Ekstrand):
- Provide performance numbers
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The term "lossless compression" could potentially mean multisample
color compression, single-sample color compression or HiZ because they
are all lossless. The term CCS_E, however, has a very precise meaning;
in ISL and is only used to refer to single-sample color compression.
It's also much shorter which is nice.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Commit 968ffd6c86 stored the last subpass
index of all the attachments but that of the depth-stencil attachment.
This could cause depth buffers used in multiple subpasses not to be in
the requested final layout. Fix this error.
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Up to now on Gen8+ we only allocated a vertex element for
gl_InstanceIndex or gl_VertexIndex when a vertex shader uses
gl_BaseInstanceARB or gl_BaseVertexARB. This is because we would
configure the VF_SGVS packet to make the VF unit write the
gl_InstanceIndex & gl_VertexIndex values right behind the values
computed from the vertex buffers.
In the next commit we will also write the gl_DrawIDARB value. Our
backend expects to pull the gl_DrawIDARB value from the element
following the element containing gl_InstanceIndex, gl_VertexIndex,
gl_BaseInstanceARB and gl_BaseVertexARB (see
vec4_vs_visitor::setup_attributes). Therefore we need to allocate an
element for the SGVS elements as long as at least one of the SGVS
element is read by the shader. Otherwise our shader will use a
gl_DrawIDARB value pulled from the URB one element too far (most
likely garbage).
v2: Fix my english (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
For RGB formats in Vulkan, we use the corresponding RGBA format with a
swizzle of RGB1. While this swizzle is exactly what we want for
texturing, it's not allowed for rendering according to the docs. While
we haven't been getting hangs or anything, we should probably obey the
docs. This commit just sanitizes all render swizzles so that the alpha
channel maps to ALPHA.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
fixes to issues spotted by Emil Velikov:
- set ANV_TIMESTAMP corretly
- fix typo with VULKAN_GEM_FILES
v2: update to use Makefile.sources under vulkan
instead of having own
v3: update to changes to generate from vk.xml
(commit c7fc310)
v4: remove 'hw' relative path
cleanups, remove unnecessary cruft
review from Emil Velikov:
- move to vulkan folder
- remove timestamp gen, no longer necessary
- more cleanups
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
It is not clear from the docs exactly how pipelined STATE_BASE_ADDRESS
actually is. We know from experimentation that we need to flush the
render cache prior to emitting STATE_BASE_ADDRESS and invalidate the
texture cache afterwards. The only thing the PRM says is that, on gen8+
we're supposed to invalidate the state cache after STATE_BASE_ADDRESS
but experimentation has indicated that doing so does nothing whatsoever.
Since we don't really know, let's do just a bit more flushing in the
hopes that this won't be a problem again. In particular:
1) Do a CS stall before we emit STATE_BASE_ADDRESS since we don't
really know whether or not it's pipelined.
2) Do a data cache flush in case what runs before STATE_BASE_ADDRESS
is a compute shader.
3) Invalidate the state and constant caches after STATE_BASE_ADDRESS
because the state may be getting cached there (we don't really know).
Reported-by: Mark Janes <mark.a.janes@intel.com>
Tested-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
We had no good reason for *not* doing this on gen7 before but we didn't
know it was needed. Recently, when trying update to Vulkan CTS version
1.0.2 in our CI system, Mark discovered GPU hangs on Haswell that appear
to be STATE_BASE_ADDRESS related. This commit fixes them.
Reported-by: Mark Janes <mark.a.janes@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
Commit 2852efcda4 moved the location of
the depth input attachment surface state from the render pass to the
image view, but failed to update the surface state location used when
emitting the binding table. Fix this by loading the surface state from
the correct location.
Fixes:
dEQP-VK.renderpass.formats.d16_unorm.input.*
dEQP-VK.renderpass.formats.d24_unorm_s8_uint.input.*
dEQP-VK.renderpass.formats.d32_sfloat.input.*
dEQP-VK.renderpass.formats.x8_d24_unorm_pack32.input.*
dEQP-VK.renderpass.attachment_allocation.input_output.93
dEQP-VK.renderpass.attachment_allocation.input_output.92
dEQP-VK.renderpass.attachment_allocation.input_output.82
dEQP-VK.renderpass.attachment_allocation.input_output.46
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
The size of the pool is slightly smaller than the size of the
structure containing the whole pool. We need to take that into account
on when setting up the internals.
Fixes a crash due to out of bound memory access in:
dEQP-VK.api.descriptor_pool.out_of_pool_memory
v2: Drop debug traces (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.0 13.0" <mesa-stable@lists.freedesktop.org>
According to GL_KHR_vulkan_glsl, the signature of subpassLoad() is:
gvec4 subpassLoad(gsubpassInput subpass);
gvec4 subpassLoad(gsubpassInputMS subpass, int sample);
So the multisampled case always receives an explicit sample index that we
should use. The current implementation was ignoring this parameter
and using gl_SampleID value instead.
Fixes:
dEQP-VK.pipeline.multisample_shader_builtin.sample_id.*
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "17.0" <mesa-stable@lists.freedesktop.org>
Add a helper function, anv_get_queue_family_properties(), which fills the
struct. This patch reduces churn in the following patch that implements
vkGetPhysicalDeviceQueueFamilyProperties2KHR.
Reviewed-by: Jason Ekstranad <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Add a helper function, anv_get_image_format_properties(), which does all
the work and has a VkPhysicalDeviceImageFormatInfo2KHR parameter. This
patch reduces churn in the following patch that implements
vkGetPhysicalDeviceImageFormatProperties2KHR.
Reviewed-by: Jason Ekstranad <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The struct was deleted by:
commit efe9d1cde3
Author: Edward O'Callaghan <funfunctor@folklore1984.net>
Subject: anv: Clean up some unused variables
Unlike the original anv_common, the new one has a non-const pNext
pointer because we will use it for the output structs of
VK_KHR_get_physical_device_properties2.
v2:
- Retype pNext from void* to struct anv_common*.
Reviewed-by: Jason Ekstranad <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
This is a printf-like macro that prints a debug message to stderr when
built with DEBUG. If no DEBUG, then do nothing.
Reviewed-by: Jason Ekstranad <jason@jlekstrand.net>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The spec section 5.2 says:
"vkAllocateCommandBuffers can be used to create multiple command
buffers. If the creation of any of those command buffers fails, the
implementation must destroy all successfully created command buffer
objects from this command, set all entries of the pCommandBuffers
array to VK_NULL_HANDLE and return the error."
Fixes:
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_primary
dEQP-VK.api.object_management.alloc_callback_fail_multiple.command_buffer_secondary
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "13.0 17.0" <mesa-stable@lists.freedesktop.org>
As per VK_KHR_maintenance1, clients can render to a slice of a 3D image
by creating a VK_IMAGE_VIEW_TYPE_2D view of it.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
As of VK_KHR_maintenance1, these are supposed to be reported for any
formats on which we support transfer operations. For us, this is
anything that we can texture from.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Our command buffers already efficiently use a global pool so trimming
doesn't really need to do anything.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
As per VK_KHR_maintenance1, setting a negative height in the viewport
can be used to get flipped coordinates. This is, aparently, very useful
when porting D3D apps to Vulkan. All we need to do to support this is
to make sure we actually set the min and max correctly.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Blorp can deal with depth/stencil surfaces blits/copies without the
render target requirement. Also having both render target and
depth/stencil requirement is incompatible from isl's point of view.
This fixes an image creation issue in the high level quality settings
of the Unity3D player, which requires a depth texture with src/dst
transfer & 4x multisampling.
v2: Simply aspect checking condition (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: 13.0 17.0 <mesa-stable@lists.freedesktop.org>
The same we do in the OpenGL driver (comment copied from there).
This is required to ensure that we execute the fragment shader stage when
side-effects (such as image or ssbo stores) are present but there are no
color writes.
I found this while writing a test to check rendering to a framebuffer
without attachments where the fragment shader does not produce any
color outputs but writes to an image via imageStore(). Without this patch
the fragment shader does not execute and the image is not written,
which is not correct.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Fixes crash in dEQP-VK.ubo.random.all_shared_buffer.48 due to a
fragment shader code bigger than 128 kB.
This patch increases the allocation size limit to 1 MB.
v2:
- Increase it to 1 MB (Jason)
- Increase device->instruction_block_pool allocation size in
anv_device.c (Jason)
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
