The GL frontend can do it for us now, so just use their code instead of
our own shader variants. In the past we had to do hide the GL shader
variants in the driver to get precompiles from st, but no longer as of
!8601.
I tested with drawoverhead -test 6 (shader program change, n=30) and -test
1 (no statechanges, n=43) and saw no change in driver overhead.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8997>
mesa/st optimizes the uniform storage if you have the finalize hook in
place, causing the uniforms declared to potentially not have storage in
the ParameterValues list any more. If you leave your uniforms around in
the NIR, then a later finalization after variant creation will re-add the
uniforms to parameters, defeating the optimization and likely reallocating
the uniform storage (causing use-after-free). So, we have to do this
before we can start using variants in mesa/st.
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8997>
Every caller of associate_uniform_storage was doing this to safety-check
that the uniform storage didn't get reallocated, except for
st_deserialise_ir_program(). This ended up leaving an opening for
use-after-free without hitting the assert in the hot-cache case (and I
found it on freedreno). Having added it, it also reveals use-after-frees
in the drawpixels shader variant cases on llvmpipe and zink.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8997>
After commit a46b73e in order to build mesa for Android
we need to generate $(intermediates)/util/format/u_format_pack.h
instead of $(intermediates)/format/u_format_pack.h
Fixes the following building error in Android build:
external/mesa/src/util/format/u_format_fxt1.c:28:10: fatal error: 'util/format/u_format_pack.h' file not found
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Fixes: a46b73e ("mesa: Move the FXT1 compressor/decompressor to util/")
Reviewed-by: Adam Jackson <ajax@redhat.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9240>
On Gen8, updating the clear color will end up allocating new
SURFACE_STATE entries. These might end up living in a different BO
than the original copies, which means that we have to pin _after_
updating the clear color, not before.
Found by inspection.
Reviewed-by: Zoltán Böszörményi <zboszor@gmail.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9257>
For platforms which do not have support for parsing driconf from xml
files on the filesystem, build in driconf tables generated from
00-mesa-defaults.conf at compile time and use that for option matching.
This allows us to have game/engine specific overrides built in to mesa.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9179>
For the static-table alternative to WITH_XMLCONFIG, we are going to want
to re-use the element attribute processing, to avoid duplicating things
like engine name regexp matching and version range matching. This just
shuffles things around a bit so we can re-use useful parts in the next
patch.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9179>
PIPE_SHADER_CAP_MAX_CONST_BUFFER_SIZE translate into
GL_MAX_*_UNIFORM_COMPONENTS, all of which are allowed to be as
low as 1024 by the GL 4.6 spec.
PIPE_CAP_MAX_SHADER_BUFFER_SIZE translate into
GL_MAX_SHADER_STORAGE_BLOCK_SIZE, which has different minimum values in
different versions of the GL spec. In the GL 4.6 spec for instance, it
is required to be 2^27, the same as what Vulkan requires.
But what these limits are in GL is irrelevant at this level of
abstraction. The OpenGL state-tracker cares, but the Gallium driver
shouldn't have to. So let's just delete those parts of the comments.
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9216>
It's unnecessary to iterate twice for instructions outside loops.
Compile-time (nir_opt_dce):
Difference at 95.0% confidence
-630.64 +/- 6.18761
-27.0751% +/- 0.223134%
(Student's t, pooled s = 7.30785)
Compile-time (entire run):
Difference at 95.0% confidence
-749.54 +/- 48.8272
-1.82644% +/- 0.117838%
(Student's t, pooled s = 57.6672)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7691>
Instead of a keeping a worklist of live instructions, use a bitset of live
ssa defs and iterate over instructions in reverse.
Compile-time (nir_opt_dce):
Difference at 95.0% confidence
-931.911 +/- 4.41383
-26.0263% +/- 0.105781%
(Student's t, pooled s = 5.21293)
Compile-time (overall):
Difference at 95.0% confidence
-882.245 +/- 28.3492
-2.08541% +/- 0.0665121%
(Student's t, pooled s = 33.4818)
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7691>
This allows to split a piglit job in several parallel jobs, to speed up
the execution.
Due piglit restrictions, this only works for single profiles. Otherwise
an error will be shown in the runner.
Also, a new gitlab job variable `PIGLIT_TESTS` is introduced that
contains the excluded/included tests with `-x` or `-n`. The rest of the
piglit options go to `PIGLIT_OPTIONS` (like `--timeout n`).
v2 (Andres):
- Replay profile is supported in parallel jobs.
- Bail out inmediately if parallel jobs is tried with multiple
profiles.
- Use testlist only when doing parallel jobs.
- Do not drop pass tests when filtering executed tests.
- Get rid of PIGLIT_FRACTION.
v4:
- uncommit unrelated change (Andres).
Signed-off-by: Juan A. Suarez Romero <jasuarez@igalia.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9022>
Straightforward by using the pixel hashing table computation helper
previously introduced, assuming we know the fraction of work that
needs to be submitted to each pixel pipe. Note that AFAIA the
hardware maps indices in the table to pixel pipes from largest to
smallest, so it shouldn't be necessary to permute indices based on the
physical IDs of the pixel pipes as we are doing on Gen11.
Improves performance of most non-trivial graphics workloads I've tried
on an 80 EU TGL. E.g. the following testcases improve performance
significantly with sample size 27 and statistical significance 1%:
gputest/pixmark_piano: 62.89% ±0.10%
gputest/pixmark_volplosion: 61.51% ±0.06%
unigine/valley: 26.72% ±0.25%
gfxbench/gl_5_high: 24.70% ±0.19%
unigine/heaven: 23.54% ±0.17%
steam/csgo: 22.75% ±4.36%
gfxbench/gl_manhattan31: 22.43% ±0.29%
gfxbench/gl_4: 20.92% ±0.35%
warsow/benchsow: 19.15% ±2.53%
gfxbench/gl_trex_off: 18.84% ±0.27%
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8749>
Pixel hashing tables are a pain to type in, review and maintain IMHO.
In order to obtain satisfactory load balancing on all Gen12 parts
currently in production this series would need to add 5 different
additional tables. Instead this introduces a simple algorithm able to
calculate a table on the fly based on a handful of parameters.
Note that the Gen11 tables generated with this algorithm are not
identical to the hardcoded ones, however the only difference should be
a phase shift that isn't expected to have any effect on performance,
since it shouldn't change the fraction of work submitted to each pixel
pipe.
The CPU overhead from this change is negligible since the tables only
need to be programmed once at context init time.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8749>
Unlike Gen11, Gen12 hardware supports up to three pixel pipes per
slice.
Unfortunately the kernel interface is somewhat inconsistent between
Gen11 and Gen12: I915_PARAM_SUBSLICE_MASK returns a mask of enabled
*dual* subslices since TGL, so there is half the number of bits per
pixel pipe in the mask. This is worked around here so we're able to
calculate the correct size of each pixel pipe, but the result is
returned in dual subslice units, inheriting the inconsistency from the
kernel -- Reason is that as of now all our Gen12 subslice counts
returned by gen_device_info.c are really dual subslice counts, and the
num_eu_per_subslice counts are also scaled accordingly, so it seems
like it would only make the matter worse if I fixed the units of this
field only without also fixing the rest.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8749>
This command allows programming custom pixel hashing tables
controlling the balancing of load across pixel pipes. Rather
confusingly 3DSTATE_SLICE_TABLE_STATE_POINTERS was serving the same
purpose on Gen11: A pixel is mapped to the pixel pipe with index
specified by the entry in the table corresponding to the LSBs of the
pixel coordinates [Yes you read right the entries are neither subslice
nor slice indices!]. Either a 2-way or a 3-way table can be
programmed based on whether the platform has two or three pixel pipes
per slice. In addition the 16x8 tables defined below can hold two
separate 8x8 tables when in DUAL_TABLE mode (which AFAIA is only
useful for platforms with multiple asymmetric slices -- I.e. no
production platforms as of today to my knowledge).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8749>
The former "Subslice Hashing Mode" field is no longer used by the
hardware, Gen12 parts always do 16x16 subslice pixel hashing -- Remove
it since it's no longer useful. In addition add a couple of bits that
will be useful in order to make some adjustments to the default pixel
pipe hashing behavior.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8749>
