We will be using the image layout. Store the full struct directly from
the user.
Signed-off-by: Nanley Chery <nanley.g.chery@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This just enables basic MSAA compression (no fast clears) for all
multisampled surfaces. This improves the framerate of the Sascha
"multisampling" demo by 76% on my Sky Lake laptop. Running Talos on
medium settings with 8x MSAA, this improves the framerate in the
benchmark by 80%.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This allows shaders to write to storage images declared with unknown
format if they are decorated with NonReadable ("writeonly" in GLSL).
Previously an image view would always use a lowered format for its
surface state, however when a shader declares a write-only image, we
should use the real format. Since we don't know at view creation time
whether it will be used with only write-only images in shaders, create
two surface states using both the original format and the lowered
format. When emitting the binding table, choose between the states
based on whether the image is declared write-only in the shader.
Tested on both Sascha Willems' computeshader sample (with the original
shaders and ones modified to declare images writeonly and omit their
format qualifiers) and on our own shaders for which we need support
for this.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
When multiple shader stages exist in the same SPIR-V module, we compile
all entry points and their inputs/outputs, then dead code eliminate the
ones not related to the specific entry point later.
nir_lower_wpos_center was being run prior to eliminating those random
other variables, which made it trip up, thinking it found gl_FragCoord
when it actually found something else like gl_PerVertex[3].
Fixes dEQP-VK.spirv_assembly.instruction.graphics.module.same_module.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
With shaders using a lot of inputs/outputs, like this (from Gtk+) :
layout(location = 0) in vec2 inPos;
layout(location = 1) in float inGradientPos;
layout(location = 2) in flat int inRepeating;
layout(location = 3) in flat int inStopCount;
layout(location = 4) in flat vec4 inClipBounds;
layout(location = 5) in flat vec4 inClipWidths;
layout(location = 6) in flat ColorStop inStops[8];
layout(location = 0) out vec4 outColor;
we're missing the programming of the input_slots_valid field leading
to an assert further down the backend code.
v2: Use valid slots of the geometry or vertex stage (Jason)
v3: Use helper to find correct vue map (Jason)
v4: Set the valid slots off the previous stages (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This moves the nir_lower_indirect_derefs() call into
brw_preprocess_nir() so thats is called by both OpenGL and Vulkan
and removes that call to the old GLSL IR pass
lower_variable_index_to_cond_assign()
We want to do this pass in nir to be able to move loop unrolling
to nir.
There is a increase of 1-3 instructions in a small number of shaders,
and 2 Kerbal Space program shaders that increase by 32 instructions.
The changes seem to be caused be the difference in the GLSL IR vs
NIR variable index lowering passes. The GLSL IR pass creates a
simple if ladder for arrays of size 4 or less, while the NIR pass
implements a binary search for all arrays regardless of size.
Shader-db results BDW:
total instructions in shared programs: 13021176 -> 13021819 (0.00%)
instructions in affected programs: 57693 -> 58336 (1.11%)
helped: 20
HURT: 190
total cycles in shared programs: 299805580 -> 299750826 (-0.02%)
cycles in affected programs: 2290024 -> 2235270 (-2.39%)
helped: 337
HURT: 442
total fills in shared programs: 19984 -> 19984 (0.00%)
fills in affected programs: 0 -> 0
helped: 0
HURT: 0
LOST: 4
GAINED: 0
V2: remove the do_copy_propagation() call from the i965 GLSL IR
linking code. This call was added in f7741c5211 but since we are
moving the variable index lowering to NIR we no longer need it and
can just rely on the nir copy propagation pass.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This moves the nir_lower_indirect_derefs() call into
brw_preprocess_nir() so thats is called by both OpenGL and Vulkan
and removes that call to the old GLSL IR pass
lower_variable_index_to_cond_assign()
We want to do this pass in nir to be able to move loop unrolling
to nir.
There is a increase of 1-3 instructions in a small number of shaders,
and 2 Kerbal Space program shaders that increase by 32 instructions.
Shader-db results BDW:
total instructions in shared programs: 8705873 -> 8706194 (0.00%)
instructions in affected programs: 32515 -> 32836 (0.99%)
helped: 3
HURT: 79
total cycles in shared programs: 74618120 -> 74583476 (-0.05%)
cycles in affected programs: 528104 -> 493460 (-6.56%)
helped: 47
HURT: 37
LOST: 2
GAINED: 0
This fixes a bunch of new CTS tests which look for exactly this. Even in
the cases where we just call vk_free to free a CPU data structure, we still
handle NULL explicitly. This way we're less likely to forget to handle
NULL later should we actually do something less trivial.
Cc: "13.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Now that we have anv_shader_bin, they're completely redundant with other
information we have in the pipeline. For vertex shaders, we also go
through way too much work to put the offset in one or the other field and
then look at which one we put it in later.
Reviewed-by: Timothy Arceri <timothy.arceri@collabora.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Here brw_setup_vue_interpolation() is rewritten not to use the InterpQualifier
array in gl_fragment_program which will allow us to remove it.
This change also makes the code which is only used by gen4/5 more self contained
as it now has its own gen5_fragment_program struct rather than storing the map
in brw_context. This means the interpolation map will only get processed once
and will get stored in the in memory cache rather than being processed everytime
the fs changes.
Also by calling this from the fs compile code rather than from the upload code
and using the interpolation assigned there we can get rid of the
BRW_NEW_INTERPOLATION_MAP flag.
It might not seem ideal to add a gen5_fragment_program struct however by the end
of this series we will have gotten rid of all the brw_{shader_stage}_program
structs and replaced them with a generic brw_program struct so there will only
be two program structs which is better than what we have now.
V2: Don't remove BRW_NEW_INTERPOLATION_MAP from dirty_bit_map until the following
patch to fix build error.
V3 - Suggestions by Jason:
- name struct gen4_fragment_program rather than gen5_fragment_program
- don't use enum with memset()
- create interp mode set helper and simplify logic to call it
- add assert when calling function to show prog will never be NULL for
gen4/5 i.e. no Vulkan
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When restoring something from shader cache we won't have and don't
want to create a nir_shader this change detaches the two.
There are other advantages such as being able to reuse the
shader info populated by GLSL IR.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This moves all the alloc/free in anv to the generic helpers.
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Now that we don't have meta, we have no need for a gen-agnostic pipeline
create path. We can, instead, just generate one Create*Pipelines function
per gen and be done with it.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Now that we no longer have meta, all pipelines get created via the normal
Vulkan pipeline creation mechanics. There is no more need for this bit of
extra magic data that we've been passing around.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Many of these can be "NULL if the pipeline has rasterization disabled."
Also, we should assert that pMultisampleState exists.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Now that we're using gen_l3_config.c, we no longer have one set of l3
config functions per gen and we can simplify a bit. Also, we know that
only compute uses SLM so we don't need to look for it in all of the stages.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Generated by:
sed -i -e 's/brw_device_info/gen_device_info/g' src/intel/**/*.c
sed -i -e 's/brw_device_info/gen_device_info/g' src/intel/**/*.h
sed -i -e 's/brw_device_info/gen_device_info/g' **/i965/*.c
sed -i -e 's/brw_device_info/gen_device_info/g' **/i965/*.cpp
sed -i -e 's/brw_device_info/gen_device_info/g' **/i965/*.h
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The original pipeline cache the Kristian wrote was based on a now-false
premise that the shaders can be stored in the pipeline cache. The Vulkan
1.0 spec explicitly states that the pipeline cache object is transiant and
you are allowed to delete it after using it to create a pipeline with no
ill effects. As nice as Kristian's design was, it doesn't jive with the
expectation provided by the Vulkan spec.
The new pipeline cache uses reference-counted anv_shader_bin objects that
are backed by a large state pool. The cache itself is just a hash table
mapping keys hashes to anv_shader_bin objects. This has the added
advantage of removing one more hand-rolled hash table from mesa.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97476
Acked-by: Kristian Høgsberg Kristensen <krh@bitplanet.net>
Jason suggested adding an assert(function->impl) here. All callers
of this function actually want ->impl, so I decided just to change
the API.
We also change the nir_lower_io_to_temporaries API here. All but one
caller passed nir_shader_get_entrypoint(), and with the previous commit,
it now uses a nir_function_impl internally. Folding this change in
avoids the need to change it and change it back.
v2: Fix one call I missed in ir3_compiler (caught by Eric).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
The pipeline layout affects shader compilation because it is what
determines binding table locations as well as whether or not a particular
buffer has dynamic offsets. Since this affects the generated shader, it
needs to be in the hash. This fixes a bunch of CTS tests now that the CTS
is using a pipeline cache.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
This solves a race condition where we can end up having different stages
stomp on each other because they're all trying to scratch in the same BO
but they have different views of its layout.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
anv_pipeline_binding::index is a uint8_t, but some code assigned to it
UINT16_MAX.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewd-by: Jason Ekstrand <jason@jlekstrand.net>
