Change brw_inst_set_opcode() and brw_inst_opcode() to call
brw_opcode_encode/decode() transparently in order to translate between
hardware and IR opcodes, and update the EU compaction code in order to
do the same as needed, so we can eventually drop the one-to-one
correspondence between hardware and IR opcodes.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Rename the original device info initialization routine so callers
don't mistakenly call the wrong one:
gen_get_device_info_from_fd:
Queries kernel for full device info, including topology
details.
gen_get_device_info_from_pci_id:
Partially initializes device info based on PCI ID lookup, when
the kernel is not available.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
The simulator complains about using byte operands, we also have
documentation telling us.
Note that add operations on bytes seems to work fine on HW (like ADD).
Using dwords operands with CMP & SEL fixes the following tests :
dEQP-VK.spirv_assembly.type.vec*.i8.*
v2: Drop the GLK changes (Matt)
Add validator tests (Matt)
v3: Drop GLK ref (Matt)
Don't mix float/integer in MAD (Matt)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com> (v1)
Reviewed-by: Matt Turner <mattst88@gmail.com>
BSpec: 3017
Cc: <mesa-stable@lists.freedesktop.org>
v2:
- Adapted unit tests to make them consistent with the changes done
to the validation of half-float conversions.
v3 (Curro):
- Check all the accummulators
- Constify declarations
- Do not check src1 type in single-source instructions.
- Check for all instructions that read accumulator (either implicitly or
explicitly)
- Check restrictions in src1 too.
- Merge conditional block
- Add invalid test case.
v4 (Curro):
- Assert on 3-src instructions, as they are not validated.
- Get rid of types_are_mixed_float(), as we know instruction is mixed
float at that point.
- Remove conditions from not verified case.
- Fix brackets on conditional.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
v2:
- Add some tests with UB type too (Jason)
v3:
- consider implicit conversions from 2src instructions too (Curro).
v4:
- Do not check src1 type in single-source instructions (Curro).
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
v2:
- Consider implicit conversions in 2-src instructions too (Curro)
- For restrictions that involve destination stride requirements
only validate them for Align1, since Align16 always requires
packed data.
- Skip general rule for the dst/execution type size ratio for
mixed float instructions on CHV and SKL+, these have their own
set of rules that we'll be validated separately.
v3 (Curro):
- Do not check src1 type in single-source instructions.
- Check restriction on src1.
- Remove invalid test.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Whiskey Lake uses the same gen graphics as Coffe Lake, including some
ids that were previously marked as reserved on Coffe Lake, but that
now are moved to WHL page.
This follows the ids and approach used on kernel's commit
b9be78531d27 ("drm/i915/whl: Introducing Whiskey Lake platform")
and commit c1c8f6fa731b ("drm/i915: Redefine some Whiskey Lake SKUs")
v2: Lionel noticed that GT{1,2,3} on kernel wasn't following
spec when looking to number of EUs, so kernel has been updated.
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Amber Lake uses the same gen graphics as Kaby Lake, including a id
that were previously marked as reserved on Kaby Lake, but that
now is moved to AML page.
This follows the ids and approach used on kernel's commit
e364672477a1 ("drm/i915/aml: Introducing Amber Lake platform")
Reported-by: Timo Aaltonen <timo.aaltonen@canonical.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Previously the unit test filled out a minimal devinfo struct. A previous
patch caused the test to begin assert failing because the devinfo was
not complete. Avoid this by using the real mechanism to create devinfo.
Note that we have to drop icl from the table, since we now rely on the
name -> PCI ID translation done by gen_device_name_to_pci_device_id(),
and ICL's PCI IDs are not upstream yet.
Fixes: f89e735719 ("intel/compiler: Check for unsupported register sizes.")
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
With the Align16 tests now disabled, we can run the rest of the tests in
ICL mode (and see them pass!)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The old code used an array to store each "instruction group" (the new,
better name than the old overloaded "annotation"), and required a
memmove() to shift elements over in the array when we needed to split a
group so that we could add an error message. This was confusing and
difficult to get right, not the least of which was because the array
has a tail sentinel not included in .ann_count.
Instead use a linked list, a data structure made for efficient
insertion.
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I did not implement:
CNL's restriction on 64-bit int + align16, because I don't think
we'll ever use this combination regardless of hardware generation.
The restriction on immediate DF -> F conversions, because there's no
reason to ever generate that, and I don't even know how DF -> F
conversions are supposed to work in Align16 since (1) the dst stride
must be 1, but (2) the dst stride would have to be 2 for src and dst
strides to be aligned.
Previously the brw_inst{,_set}_{dst,src0,src1}_reg_type() functions
provided access to the hardware encodings for the register types. We
often mixed these with the logical BRW_REGISTER_TYPE_* enums (which
themselves used to be the hardware format!) with bad results.
With that functionality now available with the hw_ versions (see
previous commit), we now add functions that take the logical
BRW_REGISTER_TYPE_* enums and convert into the hardware format and vice
versa. To do the conversion we also have to provide the file.
Note the asymmetry between the two functions: the new getter reads the
file from the instruction word, and to ensure that is always set the
setter writes both the file and the type.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
This will allow us to more easily run brw_validate_instructions() on
shader programs we find in GPU hang error states.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
