This fixes a number of tests like :
dEQP-VK.renderpass*.suballocation.multisample.s8_uint.*
dEQP-VK.renderpass*.suballocation.multisample.separate_stencil_usage.d24_unorm_s8_uint.*.test_stencil
dEQP-VK.renderpass*.suballocation.multisample.d24_unorm_s8_uint.*
dEQP-VK.renderpass*.suballocation.multisample.d32_sfloat_s8_uint.*
Because the driver asserts when generating RENDER_SURFACE_STATE with a
8 Valign value for stencil buffer (only 2 & 4 are supported).
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12670>
Now that we're using 3DSTATE_BINDING_TABLE_POOL_ALLOC to set the base
address for the binding table pool separately from surface states, we
don't actually need to update surface state base address anymore.
Instead, we can just set STATE_BASE_ADDRESS once at context creation,
and never bother updating it again, saving some heavyweight flushes
and freeing us from the need for address offsetting trickery.
This patch was originally written by Jason Ekstrand, with fixes from
Lionel Landwerlin, but was targeting Icelake. Doing it there requires
additional changes (15:5 -> 18:8 binding table pointer formats) which
also involve some trade-offs, whereas the XeHP change is purely a win,
so we'll do it here first.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15616>
First, there is a problem if you do the following
vkCmdSetColorWriteEnableEXT(attachmentCount = 8)
vkCmdBindPipeline(GFX, with attachmentCount = 4)
vkCmdDraw()
vkCmdBindPipeline(GFX, with attachmentCount = 8)
vkCmdDraw()
Because in the dynamic state emission code we rely on the first
pipeline to figure the number of BLEND_STATE entries to prepare. This
is wrong, we should fill all entries so that the dynamic state works
regardless of the number of attachments in the pipeline. With regard
to the dynamic values, we should retain enable/disable values that do
not concern the current pipeline.
Second, 3DSTATE_WM was not always reemitted when the pipeline changed.
But since it is not emitted as part of the pipeline, this results in
inconsistent state being programmed.
Third, we end up disabling the fragment stage completely in some
cases. And that is programming the pipeline inconsistently and
triggering a hang on TGL.
v2: Fix comment (Tapani)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b15bfe92f7 ("anv: implement VK_EXT_color_write_enable")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15310>
The problem is that we missed looking at pipeline changes. Pipelines
hold bits of dynamic states and when it changes we might need to
reemit a packet.
v2: fix comment (Tapani)
Add missing anv_cmd_buffer_needs_dynamic_state() use (Tapani)
Cc: mesa-stable
Fixes: 505d176a8e ("anv: disable baked in pipeline bits from dynamic emission path")
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15310>
When CCS compression first came out on Skylake, we referred to it as
"renderbuffer compression", or RBC for short. However, that name has
long since fallen out of favor, and we refer to it as CCS nearly
everywhere.
This patch renames DEBUG_NO_RBC to DEBUG_NO_CCS inside the codebase
for clarity, and adds INTEL_DEBUG=noccs. The legacy INTEL_DEBUG=norbc
name continues to work, because it's one line of code and having both
names makes our lives easier in the interim.
Reviewed-by: Jason Ekstrand <jason.ekstrand@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15447>
The Vulkan spec was recently clerified to say that transitions only
happen to the bound layers:
"Automatic layout transitions apply to the entire image subresource
attached to the framebuffer. If multiview is not enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the number of layers specified by
VkFramebufferCreateInfo::layers. If multiview is enabled and the
attachment is a view of a 1D or 2D image, the automatic layout
transitions apply to the layers corresponding to views which are
used by some subpass in the render pass, even if that subpass does
not reference the given attachment."
This is in the context of render passes but it applies to dynamic
rendering because the implicit layout transition stuff is a Mesa pseudo-
extension and inherits those rules.
For clears, the Vulkan spec says:
"renderArea is the render area that is affected by the render pass
instance. The effects of attachment load, store and multisample
resolve operations are restricted to the pixels whose x and y
coordinates fall within the render area on all attachments. The
render area extends to all layers of framebuffer."
Again, this is in the context of render passes but the same principals
apply to dynamic rendering where the layerCount and renderArea are
specified as part of the vkCmdBeginRendering() call.
Fixes: 3501a3f9ed ("anv: Convert to 100% dynamic rendering")
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15441>
This fixes the test_resolve_non_issued_query_data vkd3d-proton test.
This change is required on TGL+ (maybe ICL?) because on all platforms
3D pipeline writes are not coherent with CS. On previous platform we
fixed this by flushing the render cache to make sure data is visble to
CS before it writes to memory. But on more recently platforms,
flushing the render cache leaves the data in the tile cache which is
still not coherent with CS, so we need to flush that one too.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14552>
It's tricky to always get the render area to the viewport code. In
particular, it's not provided to secondary command buffers as part of
the inheritance info so we have to bend over backwards and look for a
framebuffer. With VK_KHR_dynamic_rendering, there is no framebuffer and
this approach won't work and we'll need something better if we want
competent guardbands in secondary command buffers.
The good news is that any client that's sloppily rendering and trusting
the clipper to keep things inside the render area will set a scissor and
that's something they have to set inside the secondary. We can dig
through the scissor state and also include the corresponding scissor (if
any) and use that for our render area. This should give us the same
secondary command buffer performance with VK_KHR_dynamic_rendering.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14961>
This is about the only "small" change we can make in the process of
converting from render-pass-based to dynamic-rendering-based. Make
everything in pipeline creation work in terms of dynamic rendering and
create the dynamic rendering structs from the render pass as-needed.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14961>
This was ill-conceived at best. Yes, it checks for a few error
conditions but it doesn't check much and what checks it has are very far
away from the code that relies on those invariants. If we care about
these invariants, we should add asserts near the code that makes those
assumptions rather than pretending to be the validation layers.
Reviewed-by: Ivan Briano <ivan.briano@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14961>
