The encoding of almost every instruction field has changed in Gen12,
so this involves adding a Gen12+ bitfield spec to every brw_inst
macro. In addition some new macros are required to handle certain
discontiguous and variable-length fields.
This commit doesn't actually include the Gen12 updated bitfield specs,
only the macros are extended here for reviewability.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
v2: Rename FDC() to FFDC() and FDC1() to FDC() for consistency with
the existing F() and FF() macros.
Change brw_inst_set_opcode() and brw_inst_opcode() to call
brw_opcode_encode/decode() transparently in order to translate between
hardware and IR opcodes, and update the EU compaction code in order to
do the same as needed, so we can eventually drop the one-to-one
correspondence between hardware and IR opcodes.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The brw_inst opcode accessors are going away in one of the following
commits. We could potentially replace them with the new helpers that
do opcode remapping, but that would lead to a circular dependency
between brw_inst.h and brw_eu.h. This way we also avoid ordering
issues that can cause the semantics of the ex_desc accessors to change
depending on whether the ex_desc field is set after or before the
opcode instruction field.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The original SrcType is a 3-bit field that takes a subset of the types
supported for the hardware for 3-source instructions. Since gen8,
when the half-float type was added, 3-source floating point operations
can use use mixed precision mode, where not all the operands have the
same floating-point precision. While the precision for the first operand
is taken from the type in SrcType, the bits in Src1Type (bit 36) and
Src2Type (bit 35) define the precision for the other operands
(0: normal precision, 1: half precision).
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
These have clearly never seen any use.... On gen8, the bottom 4 bits are
missing so we need to shift them off before we call set_bits and shift
again when we get the bits. Found by inspection.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This is necessary for a new Gen9 message type that will be added in the
next patch. There are also Gen8 message types that need the extra bit
(mostly for bindless).
v2: Split off from the next patch. Suggested by Caio.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This introduces helpers that can be used to specify or extract the
whole descriptor of a SEND message instruction at once. Because the
the instruction encoding of these is rather awkward on some
generations using the generic brw_inst.h macros doesn't seem like an
option.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Split out the device info so isl doesn't depend on intel/common. Now
it will depend on the new intel/dev device info lib.
This will allow the decoder in intel/common to use isl, allowing us to
apply Ken's patch that removes the genxml duplication of surface
formats.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reduces my build from 6451 warnings to 6301 warnings by silencing 150
instances of
../../SOURCE/master/src/intel/compiler/brw_inst.h: In function ‘brw_reg_type brw_inst_src1_type(const gen_device_info*, const brw_inst*)’:
../../SOURCE/master/src/intel/compiler/brw_inst.h:802:55: warning: enumeral and non-enumeral type in conditional expression [-Wextra]
unsigned file = __builtin_strcmp("dst", #reg) == 0 ? \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
BRW_GENERAL_REGISTER_FILE : \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
brw_inst_##reg##_reg_file(devinfo, inst); \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../SOURCE/master/src/intel/compiler/brw_inst.h:811:1: note: in expansion of macro ‘REG_TYPE’
REG_TYPE(src1)
^~~~~~~~
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Put hw_ in the name so that it's clear these are the hardware encodings.
Similar to commit 9fb8323328 ("i965: Rename brw_inst's functions that
access the register type")
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
brw_hw_type_to_reg_type() needs to know only whether the file is
BRW_IMMEDIATE_VALUE or not, which is not a valid file for the
destination. gcc and clang will evaluate __builtin_strcmp() at compile
time, so we can use it to pass a constant file for the destination.
text data bss dec hex filename
7816214 346248 420496 8582958 82f72e i965_dri.so before
7816070 346248 420496 8582814 82f69e i965_dri.so after
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Previously the brw_inst{,_set}_{dst,src0,src1}_reg_type() functions
provided access to the hardware encodings for the register types. We
often mixed these with the logical BRW_REGISTER_TYPE_* enums (which
themselves used to be the hardware format!) with bad results.
With that functionality now available with the hw_ versions (see
previous commit), we now add functions that take the logical
BRW_REGISTER_TYPE_* enums and convert into the hardware format and vice
versa. To do the conversion we also have to provide the file.
Note the asymmetry between the two functions: the new getter reads the
file from the instruction word, and to ensure that is always set the
setter writes both the file and the type.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
After the last patch converted things into enums, I helpfully got a
compiler warning about these missing from the switch statement.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Simple search for a backslash followed by two newlines.
If one of the newlines were to be removed, this would cause issues, so
let's just remove these trailing backslashes.
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
