Set of opcodes doesn't have enough flexibility in certain cases. E.g.
Utgard PP has vector conditional select operation, but condition is always
scalar. Lowering all the vector selects to scalar increases instruction
number, so we need a way to filter only those ops that can't be handled
in hardware.
Reviewed-by: Qiang Yu <yuq825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
v2: add to series
v3: update Makefile.sources
v4: don't remove a comment and break statement
v4: use nir_can_move_instr
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
The rules for gl_SubgroupSize in Vulkan require that it be a constant
that can be queried through the API. However, all GL requires is that
it's a uniform. Instead of always claiming that the subgroup size in
the shader is 32 in GL like we have to do for Vulkan, claim 8 for
geometry stages, the maximum for fragment shaders, and the actual size
for compute.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Instead of lowering the subgroup size so early, wait until we have more
information. In particular, we're going to want different subgroup
sizes from different stages depending on the API. We also defer
lowering of subgroup masks because the ge/gt masks require the subgroup
size to generate a subgroup mask.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that the 64-bit lowering passes do a complete lowering in one go, we
don't need to loop anymore. We do, however, have to ensure that int64
lowering happens after double lowering because double lowering can
produce int64 ops.
Reviewed-by: Eric Anholt <eric@anholt.net>
For bindless SSBO access, we have to do 64-bit address calculations. On
ICL and above, we don't have 64-bit integer support so we have to lower
the address calculations to 32-bit arithmetic. If we don't run the
optimization loop before lowering, we won't fold any of the address
chain calculations before lowering 64-bit arithmetic and they aren't
really foldable afterwards. This cuts the size of the generated code in
the compute shader in dEQP-VK.ssbo.phys.layout.random.16bit.scalar.13 by
around 30%.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
c8665005: ("intel/compiler: Don't always require precise lowering of flrp")
forgot to remove some comments that didn't apply any more after the
change.
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrnd.net>
Pretty much every driver using nir_lower_io_to_temporaries followed by
nir_lower_io is going to want this. In particular, radv and radeonsi in
the next commits.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Since NIR_PASS no longer swaps out the NIR pointer when NIR_TEST_* is
enabled, we can just take a single pointer and not a pointer to pointer.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that NIR_TEST_* doesn't swap the shader out from under us, it's
sufficient to just modify the shader rather than having to return in
case we're testing serialization or cloning.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
A few of our very late passes can end up generating vectors accidentally
so we need to get rid of them. The only known case of this is the ffma
peephole which generates fneg and fabs as vectors. Currently, they're
not a problem because they get turned into fmov which the back-end
compiler knows how to handle as a vector. That's about to change.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
This can be used by both etnaviv and freedreno/a2xx as they are both vec4
architectures with some instructions being scalar-only.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
I tried to be very careful while updating all the various drivers, but I
don't have any of that hardware for testing. :(
i965 is the only platform that sets always_precise = true, and it is
only set true for fragment shaders. Gen4 and Gen5 both set lower_flrp32
only for vertex shaders. For fragment shaders, nir_op_flrp is lowered
during code generation as a(1-c)+bc. On all other platforms 64-bit
nir_op_flrp and on Gen11 32-bit nir_op_flrp are lowered using the old
nir_opt_algebraic method.
No changes on any other Intel platforms.
v2: Add panfrost changes.
Iron Lake and GM45 had similar results. (Iron Lake shown)
total cycles in shared programs: 188647754 -> 188647748 (<.01%)
cycles in affected programs: 5096 -> 5090 (-0.12%)
helped: 3
HURT: 0
helped stats (abs) min: 2 max: 2 x̄: 2.00 x̃: 2
helped stats (rel) min: 0.12% max: 0.12% x̄: 0.12% x̃: 0.12%
Reviewed-by: Matt Turner <mattst88@gmail.com>
These will be lowered by nir_lower_tex() with the
lower_tex_when_implicit_lod_not_supported, so don't need the extra
handling here.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
When we have a bindless sampler, we need an instruction header. Even in
SIMD8, this pushes the instruction over the sampler message size maximum
of 11 registers. Instead, we have to lower TXD to TXL.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
We're about to start doing 64-bit pointer calculations in ANV. They
will get applied after brw_preprocess_nir which is where we currently do
64-bit integer arithmetic lowering. Because we're adding 64-bit integer
arithmetic after the initial lowering has happened, we need to lower
again.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Extended math with half-float operands is only supported since gen9,
but it is limited to SIMD8. In gen8 we lower it to 32-bit.
v2: quashed together the following patches (Jason):
- intel/compiler: allow extended math functions with HF operands
- intel/compiler: lower 16-bit extended math to 32-bit prior to gen9
- intel/compiler: extended Math is limited to SIMD8 on half-float
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
(allow extended math functions with HF operands,
extended Math is limited to SIMD8 on half-float)
Some conversions are not directly supported in hardware and need to be
split in two conversion instructions going through an intermediary type.
Doing this at the NIR level simplifies a bit the complexity in the backend.
v2:
- Consider fp16 rounding conversion opcodes
- Properly handle swizzles on conversion sources.
v3
- Run the pass earlier, right after nir_opt_algebraic_late (Jason)
- NIR alu output types already have the bit-size (Jason)
- Use 'is_conversion' to identify conversion operations (Jason)
v4:
- Be careful about the intermediate types we use so we don't lose
range and avoid incorrect rounding semantics (Jason)
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v1)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When I implemented opt_if_loop_last_continue() I had restricted
this pass from moving other if-statements inside the branch opposite
the continue. At the time it was causing a bunch of spilling in
shader-db for i965.
However Samuel Pitoiset noticed that making this pass more aggressive
significantly improved the performance of Doom on RADV. Below are
the statistics he gathered.
28717 shaders in 14931 tests
Totals:
SGPRS: 1267317 -> 1267549 (0.02 %)
VGPRS: 896876 -> 895920 (-0.11 %)
Spilled SGPRs: 24701 -> 26367 (6.74 %)
Code Size: 48379452 -> 48507880 (0.27 %) bytes
Max Waves: 241159 -> 241190 (0.01 %)
Totals from affected shaders:
SGPRS: 23584 -> 23816 (0.98 %)
VGPRS: 25908 -> 24952 (-3.69 %)
Spilled SGPRs: 503 -> 2169 (331.21 %)
Code Size: 2471392 -> 2599820 (5.20 %) bytes
Max Waves: 586 -> 617 (5.29 %)
The codesize increases is related to Wolfenstein II it seems largely
due to an increase in phis rather than the existing jumps.
This gives +10% FPS with Doom on my Vega56.
Rhys Perry also benchmarked Doom on his VEGA64:
Before: 72.53 FPS
After: 80.77 FPS
v2: disable pass on non-AMD drivers
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com> (v1)
Acked-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
This fixes a serious performance issue with DXVK:
https://github.com/doitsujin/dxvk/issues/937
This was caused by a recent change that to improve performance on RADV
which back-fired on ANV and killed performance for some apps:
e5a06d3f4a
Throwing in this bit of lowering lets us come along and CSE those UBO
loads (or copy-prop for SSBO load) and get one load where we previously
would have gotten several.
VkPipeline-db results on Kaby Lake:
total instructions in shared programs: 5115361 -> 5073185 (-0.82%)
instructions in affected programs: 1754333 -> 1712157 (-2.40%)
helped: 5331
HURT: 63
total cycles in shared programs: 2544501169 -> 2481144545 (-2.49%)
cycles in affected programs: 2531058653 -> 2467702029 (-2.50%)
helped: 9202
HURT: 4323
total loops in shared programs: 3340 -> 3331 (-0.27%)
loops in affected programs: 9 -> 0
helped: 9
HURT: 0
total spills in shared programs: 3246 -> 3053 (-5.95%)
spills in affected programs: 384 -> 191 (-50.26%)
helped: 10
HURT: 5
total fills in shared programs: 4626 -> 4452 (-3.76%)
fills in affected programs: 439 -> 265 (-39.64%)
helped: 10
HURT: 5
All of the shaders with hurt spilling were in Rise of the Tomb Raider
which also had shaders solidly helped in the spilling department. Not
shown in those results (because I've not had success dumping the
shaders) is Witcher 3 where this reduces spilling and improves over-all
perf by around 20-25%. There were no shader-db changes. Apparently,
this just isn't a pattern that happens in OpenGL.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Cc: "19.0" mesa-stable@lists.freedesktop.org
Due to lack of write mask in SPIR-V store, generators may produce
multiple stores to the same vector but using different array derefs.
Use the combining store pass to clean this up. For example,
layout(binding = 3) buffer block {
vec4 v;
};
void main() {
v.x = 11;
v.y = 22;
}
after going to SPIR-V and NIR, ends up with in two store_derefs to
v[0] and v[1]
vec2 32 ssa_4 = deref_struct &ssa_3->field0 (ssbo vec4) /* &((block *)ssa_2)->field0 */
vec2 32 ssa_6 = deref_array &(*ssa_4)[0] (ssbo float) /* &((block *)ssa_2)->field0[0] */
intrinsic store_deref (ssa_6, ssa_7) (1, 0) /* wrmask=x */ /* access=0 */
vec1 32 ssa_13 = load_const (0x00000001 /* 0.000000 */)
vec2 32 ssa_14 = deref_array &(*ssa_4)[1] (ssbo float) /* &((block *)ssa_2)->field0[1] */
intrinsic store_deref (ssa_14, ssa_15) (1, 0) /* wrmask=x */ /* access=0 */
producing two different sends instructions in skl. The combining pass
transform the snippet above into
vec2 32 ssa_4 = deref_struct &ssa_3->field0 (ssbo vec4) /* &((block *)ssa_2)->field0 */
vec4 32 ssa_18 = vec4 ssa_7, ssa_15, ssa_16, ssa_17
intrinsic store_deref (ssa_4, ssa_18) (3, 0) /* wrmask=xy */ /* access=0 */
producing a single sends instruction.
v2: Move this from spirv_to_nir into the general optimization pass for
intel compiler. (Jason)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: (all from Jason)
Reuse existing function for the end of the block combinations.
Check the SSA values are coming from the right place in tests.
Document the case when the store to array_deref is reused.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
The IO scalarization pass that we run to help with linking end up
turning some shader I/O such as that for tessellation and geometry
shaders into many scalar URB operations rather than one vector one. To
alleviate this, we now vectorize the I/O once again. This fixes a 10%
performance regression in the GfxBench tessellation test that was caused
by scalarizing.
Shader-db results on Kaby Lake:
total instructions in shared programs: 15224023 -> 15220871 (-0.02%)
instructions in affected programs: 342009 -> 338857 (-0.92%)
helped: 1236
HURT: 443
total spills in shared programs: 23471 -> 23465 (-0.03%)
spills in affected programs: 6 -> 0
helped: 1
HURT: 0
total fills in shared programs: 31770 -> 31766 (-0.01%)
fills in affected programs: 4 -> 0
helped: 1
HURT: 0
Cycles was just a lot of churn do to moves being different places. Most
of the pure churn in instructions was +/- one or two instructions in
fragment shaders.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107510
Fixes: 4434591bf5 "intel/nir: Call nir_lower_io_to_scalar_early"
Fixes: 8d8222461f "intel/nir: Enable nir_opt_find_array_copies"
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
It doesn't really matter where this pass goes as long as it's after we
call nir_lower_explicit_io and before we go into the back-end. Putting
it brw_postprocess_nir lets us move nir_lower_explicit_io significantly
later in the pipeline.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Now that we have a loop unrolling cost function and loop unrolling isn't
going to kill us the moment we have a 64-bit op in a loop, we can go
ahead and move 64-bit lowering later. This gives us the opportunity to
do more optimizations and actually let the full optimizer run even on
64-bit ops rather than hoping one round of opt_algebraic will fix
everything. This substantially reduces both fp64 shader compile times
and the resulting code size. On the vs-isnan-dvec test from piglit:
Before this commit:
1684.63s user 17.29s system 99% cpu 28:28.24 total
101479 instructions. 0 loops. 802452 cycles. 79:369 spills:fills.
Peak memory usage (according to massif): 1.435 GB
After this commit:
179.64s user 7.75s system 99% cpu 3:07.92 total
57316 instructions. 0 loops. 459287 cycles. 0:0 spills:fills.
Peak memory usage (according to massif): 531.0 MB
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of trusting the caller to already have created a softfp64
function shader and added all its functions to our shader, we simply
take the softfp64 shader as an argument and do the function inlining
ouselves. This means that there's no more nasty functions lying around
that the caller needs to worry about cleaning up.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Even though this is technically a step in the function inlining process
as laid out in nir_inline_functions.c, it's not really needed. We
already have constant initializers lowered here and no new ones are
added by appending the softfp64 functions.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
When we have a larger sampler index, we get into the "high sampler"
scenario and need an instruction header. Even in SIMD8, this pushes the
instruction over the sampler message size maximum of 11 registers.
Instead, we have to lower TXD to TXL.
Fixes: cb98e0755f "intel/fs: Support min_lod parameters on texture..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Instead of calculating the int64 and doubles lowering options each
time a shader is preprocessed, save and use the values in
nir_shader_compiler_options.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
