If we allow the size to be more than 2^32, then we should compute it
in 64bit arithmetic otherwise we might run into overflow issues.
CID: 1412892, 1412891
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
The compact flag doesn't make sense on local variables, since the
packing on them is up to the driver. This fixes nir_validate assertions
in some cases, particularly when lower_io_to_temporaries is used on
per-vertex inputs/outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
While normally we give variables whose name field is NULL a temporary
name when called from nir_print_shader(), when we were calling from
nir_print_instr() we never bothered, meaning that we just segfaulted
when trying to print out instructions with such a variable. Since
nir_print_instr() is meant to be called while debugging, we don't need
to bother too much about giving a consistent name, but we don't want to
crash in the middle of debugging.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
It's a bit rare, but blorp can trigger a urb reconfiguration. When
that happens, we need to re-upload the URB config. Previoulsy blorp
would set BRW_NEW_URB_SIZE, but this is a pretty big hammer as it
would cause back-to-black blorp operations to reconfigure both times.
Using BRW_NEW_BLORP is a small, more accurate hammer.
v2 (idr): Sort BRW_NEW_ tokens to match brw_recalculate_urb_fence and
gen6_urb.
v3 (idr): Don't whack BRW_NEW_URB_SIZE in blorp. Suggested by Jason.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add support for 32-bit RGBX/RGBA formats which are required for Android.
The original patch (commit ccdcf91104) was reverted (commit
c0c6ca40a2) in mesa as it broke GLX resulting in swapped colors. Based
on further investigation by Chad Versace, moving the RGBX/RGBA configs
to the end is enough to prevent breaking GLX.
The handling of RGBA/RGBX in dri_fill_st_visual is a fix from Marek
Olšák.
Cc: Eric Anholt <eric@anholt.net>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Previous check-ins without testing with USE_SIMD16_FRONTEND have
introduced regressions. This fixes the build, not the regressions.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Core will ensure hot tiles are loaded for read and write render targets,
and will skip all output merger for read-only render targets.
Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>
Forwarding from the ES prolog to the ES just barely exceeds the current
maximum array size when 16 vertex attributes are used. Give it a decent
bump to account for merged shaders having up to 32 user SGPRs.
Fixes a crash in GL45-CTS.multi_bind.draw_bind_vertex_buffers.
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
If the application hasn't done any drawing since the last call, we
would reuse the same back buffer which was used for the previous swap,
which may not have completed yet. This could result in various issues
such as tearing or application hangs.
In the normal case, the behaviour is unchanged.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97957
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101683
Cc: mesa-stable@lists.freedesktop.org
[Michel Dänzer: Make Thomas' fix from bugzilla actually work as
intended, write commit log]
Any form of CCS on gen9+ only works on Y-tiled images. The only caller
of create_for_bo which uses Y-tiled BOs is create_for_dri_image.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
We want to start using create_for_dri_image for all miptrees created
from __DRIimage, including those which come from a window system. In
order to allow for fast clears to still work on window system buffers,
we need to allow for creating aux surfaces.
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
The __DRI_FORMAT enums are all UNORM but we will frequently want sRGB
when creating miptrees for renderbuffers. This lets us specify.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Due to the wonders of autogeneration, this new version covers a few
formats that the old version was missing:
MESA_FORMAT_SRGB8_ALPHA8_ASTC_3x3x3
MESA_FORMAT_SRGB8_ALPHA8_ASTC_4x3x3
MESA_FORMAT_SRGB8_ALPHA8_ASTC_4x4x3
MESA_FORMAT_SRGB8_ALPHA8_ASTC_4x4x4
MESA_FORMAT_SRGB8_ALPHA8_ASTC_5x4x4
MESA_FORMAT_SRGB8_ALPHA8_ASTC_5x5x4
MESA_FORMAT_SRGB8_ALPHA8_ASTC_5x5x5
MESA_FORMAT_SRGB8_ALPHA8_ASTC_6x5x5
MESA_FORMAT_SRGB8_ALPHA8_ASTC_6x6x5
MESA_FORMAT_SRGB8_ALPHA8_ASTC_6x6x6
Reviewed-by: Chad Versace <chadversary@chromium.org>
Later commits require intel_update_image_buffer() to have control over
the miptree creation. However, intel_update_winsys_renderbuffer_miptree()
currently creates it based on the given buffer object. This patch moves
the creation to the caller side.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
There is nothing particularly useful to do currently if the update
fails, but there is no point carrying on either. As a result, this has a
behavior change.
v2: Make the return type a bool (Topi)
v3: Don't leak the bo if update_winsys_renderbuffer fails. (Jason)
Signed-off-by: Ben Widawsky <benjamin.widawsky@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
This does make a tiny functional change in that we now also test for
whether or not the format supports texturing and not just rendering.
However, this should have no practical effect as all renderbuffers use
texturable formats.
Reviewed-by: Chad Versace <chadversary@chromium.org>
This is what we do in intel_image_target_renderbuffer_storage and it
makes more sense than stomping them. Because the image gets created as
a 2D image with one miplevel, they should already be equal to the
provided width/height. Adding the tile offset makes some sense
depending on how you interpret the fields.
The only place these fields are used for in state setup is to set up the
image parameters we pass into shaders. There may be issues here if you
try to use image_load_store on something pulled in from EGL but that's
probably broken already. This just makes it consistently broken.
Reviewed-by: Chad Versace <chadversary@chromium.org>
This is mostly a direct port. The only bit of refactoring that was done
was to make creating a planar miptree be an early return from the
non-planar case. Alternatively, we could have three functions: two
helpers and a main function to just call the right helper. Making the
planar case an early return seemed cleaner.
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
We were using the "cp" union fields, which are only valid for compute
shaders. The threads calculation affects the available GPRs, so just
pick a small number for other shader types to avoid limiting available
registers.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org
The comments are correct - we get -1 and 0. However by adding 1, we
convert this into 0,1. This mostly works for conditionals, but when
negated, this will yield the wrong result. Instead just negate the
values (as they are backwards -- -1 means back instead of front).
Fixes tests/shaders/glsl-fs-frontfacing-not.shader_test and
dEQP-GLES3.functional.shaders.builtin_variable.frontfacing on A530.
The latter also tested on A306 by Rob Clark.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
If a cube image has VK_IMAGE_USAGE_STORAGE_BIT set, the type in an image
view's descriptor was set to a 2D array (and a few other fields adjusted
accordingly). This is correct when the image view is actually bound as a
storage image, but not when bound as a sampled image. In that case the
type should be set as a cube.
Fix by generating 2 sets of descriptors at view creation time for both
storage and non-storage usage, and then choose between them based on
descriptor type when writing descriptor sets.
v2: Generate storage descriptors for images with TRANSFER_DST, since
those may be used as storage images internally.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This free was left in after dynamic descriptors were changed to not be
allocated separately from the descriptor set, and can cause a crash.
Fixes: 39644fa40a ("radv: Don't allocate dynamic descriptors separately")
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
If size of client memory copy is too large, don't copy. The draw will
access user-buffer directly and then block. This is faster and more
efficient than queuing many large client draws.
Applications that still use large client arrays benefit from this. VMD
is an example.
The threshold for this path defaults to 32KB. This value can be
overridden by setting environment variable SWR_CLIENT_COPY_LIMIT.
v2: Use #define for default value, rather than hard-coded constant.
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Moved reading of environment config options out of
swr_create_screen_internal, into a separate swr_validate_env_options.
This is to keep from cluttering create_screen.
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
Removed the hard-coded constant in favor of a #define. Also removed
TODO comment. The constant value doesn't need an environment
configurable option.
Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
