I recently experimented with performing rasterizer discard in the SOL
unit instead of the clipper, and as far as I can tell, it's basically
the same performance. The clipper comes directly after SOL anyway,
and setting the clipper to REJECT_ALL should be pretty darn cheap.
Keep the perf_debug on Sandybridge, where the GS actually does work.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
There are almost no tests in any test suite, but what little I've found
seems to work. Ilia believes everything is in place.
v2: Predicate the enable on ES 3.1 being available (Gen8+) and also
ARB_compute_shader being available (requested by Ilia).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The use of a bitmask makes functions iterating only active
attributes less visible in profiles.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The use of a bitmask makes functions iterating only active
attributes less visible in profiles.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
The bitmask used here for iteration is a combination
of different enabled masks present for texture units.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces an iterate and test bit in a bitmask loop by a
loop only iterating over the bits set in the bitmask.
The bitmask used here for iteration is a combination
of different enabled masks present for texture units.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces a loop that iterates all lights and test
which of them is enabled by a loop only iterating over
the bits set in the enabled bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces a loop that iterates all lights and test
which of them is enabled by a loop only iterating over
the bits set in the enabled bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces loops that iterate all lights and test
which of them is enabled by a loop only iterating over
the bits set in the enabled bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces a loop that iterates all lights and test
which of them is enabled by a loop only iterating over
the bits set in the enabled bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Replaces loops that iterate all lights and test
which of them is enabled by a loop only iterating over
the bits set in the enabled bitmask.
v2: Use _mesa_bit_scan{,64} instead of open coding.
v3: Use u_bit_scan{,64} instead of _mesa_bit_scan{,64}.
Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
The aim is to replace the CoordReplace array by
a bitfield. Until all drivers are converted,
establish the bitfield in parallel to the
CoordReplace array.
v2: Fix bitmask logic.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Instead use the internal gl_shader_stage enum everywhere. This
makes things more consistent and gets rid of unnecessary
conversions.
Ideally it would be nice to remove the Type field from gl_shader
altogether but currently it is used to differentiate between
gl_shader and gl_shader_program in the ShaderObjects hash table.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
If the log file specified by the GALLIUM_LOG_FILE begins with '+', open
the file in append mode. This is useful to log all gallium output for
an entire piglit run, for example.
v2: put GALLIUM_LOG_FILE support inside an #ifdef DEBUG block.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
anv_pipeline_binding::index is a uint8_t, but some code assigned to it
UINT16_MAX.
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewd-by: Jason Ekstrand <jason@jlekstrand.net>
The expected stride calculation is completely wrong. It should
ultimately be multiplying cpp and width rather than dividing. The width
also needs to be aligned to the tiling width first before converting to
stride bytes.
The whole stride check here is possibly pointless. Any buffers which
were allocated outside of vc4 may have strides with larger alignment
requirements.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
We still need to recompile the passthrough shader when this value
changes, as it also affects the output vertex count. But otherwise,
we can eliminate recompiles on Gen8+.
We probably want to do this for Gen7 as well, but that requires
rewriting the input release code to use a loop, which is a trade-off
I'd need to consider in more detail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes three GL44-CTS.tessellation_shader subtests:
- max_patch_vertices
- single.max_patch_vertices
- tessellation_control_to_tessellation_evaluation.gl_PatchVerticesIn
These use gl_PatchVerticesIn in the TES, but don't link against a
TCS (which would allow the linker to lower it to a constant). We had
no handling for the system value in the backend, so it would just
assert fail.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
i965 has no special hardware for this, so we need to pass this value in
as a uniform (unless the TES is linked against a TCS, in which case the
linker can just replace this with a constant).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Cc: mesa-stable@lists.freedesktop.org
Found by -fsanitize=undefined. Note that this should be a harmless issue in
practice because the inst->op check always dominates anyway.
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
