In Fragment Shader, regular inputs are laid out in the thread payload
in a one dword per each half-GRF, that gives room for having the two
delta dwords needed for interpolation.
Per-primitive inputs are laid out before the regular inputs, and since
there's no need to have delta information, they are packed. So
half-GRF will be fully filled with 4 dwords of input.
When num_per_primitive_inputs is zero (the default case), behavior
should be the same as before.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13661>
Instead of checking for MESA_SHADER_COMPUTE (and KERNEL). Where
appropriate, also use gl_shader_stage_is_compute().
This allows most of the workgroup-related lowering to be applied to
Task and Mesh shaders. These will be added later and "inherit" from
cs_prog_data structure.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/13629>
The source_depth_to_render_target flag can get set on old gen4-5 HW in a
few cases which are independent of the app writing gl_FragDepth. It
should be safe to just use fetch_payload_reg in that case instead of
depending in interpolation setup. This fixes a bug with certain very
simple shaders where we might end up not including the depth when we
should have.
While we're here, rework the logic around setting src_depth and add a
comment so it's more clear what's going on.
Fixes: 6d4070f3dd "intel/compiler: add support for fragment coordinate..."
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10596>
The PIXEL_X/Y opcodes used by the current implementation are broken on
XeHP due to the new regioning restrictions of the floating-point pipe.
We could have the regioning lowering pass fix it in theory by lowering
the conversions into separate MOV instructions, but that would be more
costly than this implementation that only needs a pair of pipelined
ADDs and a pair of pipelined MOVs.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10000>
v2: Instead of fixing unitialized member 'fs_visitor::input_vue_map'
(as reported by Coverity Scan in defect CID 1474559),
remove unused members 'vec4_tcs_visitor::input_vue_map' and
'fs_visitor::input_vue_map'.
Also fixed 'debug_enabled' argument skipped in a fs_visitor constructor
call from brw_compile_tes().
Signed-off-by: Yevhenii Kharchenko <yevhenii.kharchenko@globallogic.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/10040>
The Intel bindless thread dispatch model is very simple. When a compute
shader is to be used for bindless dispatch, it can request a set of
stack IDs. These are allocated per-dual-subslice by the hardware and
recycled automatically when the stack ID is returned. Passed to the
bindless dispatch are a global argument address, a stack ID, and an
address of the BINDLESS_SHADER_RECORD to invoke. When the bindless
shader is dispatched, it is passed its stack ID as well as the global
and local argument pointers. The local argument pointer is the address
of the BINDLESS_SHADER_RECORD plus some offset which is specified as
part of the BINDLESS_SHADER_RECORD.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
These variables seem to be initialized before being used, so this
patch is not fixing any bug, but leaving them unitialized may become
a bug after some refactoring.
These classes were affected: fs_reg_alloc, fs_visitor, fs_generator,
instruction_scheduler.
Found by Coverity.
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6667>
We generate bitfields of bits that we want to retain (mask) and bits
that we want to set (brw_mode) in the cr0 register, so the bits we want
to set should be in the set of bits we want to retain.
Also, remove the initialization of mask from
fs_visitor::emit_shader_float_controls_execution_mode since
brw_rnd_mode_from_nir initializes the mask parameter unconditionally.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5566>
This introduces an analysis pass intended to estimate several
performance statistics of the shader, including cycle count latency
and throughput values, based on static modeling. It has instruction
performance information more comprehensive than the current scheduling
pass for all platforms between Gen4-11, and works on both the FS and
VEC4 back-end.
The most immediate purpose of this pass is to implement a heuristic
meant to determine whether using SIMD32 dispatch for a fragment shader
can be expected to help more than it hurts. In addition this will
allow the effect of passes run after scheduling (e.g. the TGL software
scoreboard pass and the VEC4 dependency control pass) to be visible in
shader-db statistics.
But that isn't the end of the story, other potential applications of
this pass (not part of this MR) I've been playing around with are:
- Implement a similar SIMD16 heuristic allowing the identification of
inefficient SIMD16 fragment shaders.
- Implement similar SIMD16 and SIMD32 heuristics for the compute
shader stage -- Currently compute shader builds always use the
SIMD16 shader if available and never use the SIMD32 shader unless
strictly necessary, which is suboptimal under certain conditions.
- Hook up to the instruction scheduler in order to improve the
accuracy of its timing information.
- Use as heuristic in order to drive the selection of scheduling
modes (Matt was experimenting with that).
- Plug to the TGL software scoreboard pass in order to implement a
more effective SBID token allocation algorithm, since in general
the optimal token allocation depends on the timings of all
instructions in the program.
- Use its bottleneck detection functionality in order to implement a
heuristic computing a more optimal bound for the number of fragment
shader threads executed in parallel (by adjusting the
MaximumNumberofThreadsPerPSD control of 3DSTATE_PS).
As a follow-up I'm planning to submit updated timing information for
Gen12 platforms -- Everything else required to support Gen12 like SWSB
handling is already included in this patch, but there were some IP
concerns regarding the TGL timing parameters since they cannot
currently be obtained with the documentation and hardware which is
publicly available. The timing parameters for any previous Gen7-11
platforms can be obtained by anyone by sampling the timestamp register
using e.g. shader_time, though I have some more convenient
instrumentation coming up.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Makes more sense considering SIMD32. Relaxing the assertion in
brw_ir_fs.h will be required in order to avoid assertion failures on
SNB with SIMD32 fragment shaders.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This applies the same work-around I commited as b84fa0b31e
"intel/fs/gen11: Work around dual-source blending hangs in combination
with SIMD32." to Gen12, which seems to suffer from the same hardware
bug found empirically. The failure mode seems to be identical.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Change brw_compute_vue_map() to also take the number of pos slots. If
more than one slot is used, the VARYING_SLOT_POS is treated as an
array.
When using Primitive Replication, instead of a single position, the
VUE must contain an array of positions. Padding might be
necessary (after clip distance) to ensure rest of attributes start
aligned.
v2: Add note about array in the commit message and assert that
pos_slots >= 1 to make clear 0 is invalid. (Jason)
Move padding to be after the clip distance.
v3: Apply the correct offset when gathering the sources from outputs.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> [v2]
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Avoid looping over all VARYING_SLOT_MAX urb_setup array
entries from genX_upload_sbe. Prepare an array indirection
to the active entries of urb_setup already in the compile
step. On upload only walk the active arrays.
v2: Use uint8_t to store the attribute numbers.
v3: Change loop to build up the array indirection.
v4: Rebase.
v5: Style fix.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/308>
This defines a new BRW_ANALYSIS object which wraps the register
pressure computation code along with its result. For the rationale
see the previous commits converting the liveness and dominance
analysis passes to the IR analysis framework.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
This involves wrapping fs_live_variables in a BRW_ANALYSIS object and
hooking it up to invalidate_analysis() so it's properly invalidated.
Seems like a lot of churn but it's fairly straightforward. The
fs_visitor invalidate_ and calculate_live_intervals() methods are no
longer necessary after this change.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
This moves the following methods that are currently defined in
fs_visitor (even though they are side products of the liveness
analysis computation) and are already implemented in
brw_fs_live_variables.cpp:
> bool virtual_grf_interferes(int a, int b) const;
> int *virtual_grf_start;
> int *virtual_grf_end;
It makes sense for them to be part of the fs_live_variables object,
because they have the same lifetime as other liveness analysis results
and because this will allow some extra validation to happen wherever
they are accessed in order to make sure that we only ever use
up-to-date liveness analysis results.
This shortens the virtual_grf prefix in order to compensate for the
slightly increased lexical overhead from the live_intervals pointer
dereference.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4012>
Use it instead of hard-coding f0.1 for the sample mask of programs
that use discard. This will make the task easier when we replace f0.1
with another flag register location in order to support discard with
SIMD32 shaders.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The SIMD8 dual-source blending framebuffer write messages seem to have
trouble releasing the pixel scoreboard dependency in SIMD32 dispatch
mode, which leads to hangs. I have a better workaround for this which
doesn't involve disabling SIMD32 when dual-source blending is enabled,
but I'm still investigating some issues with it. Limit the dispatch
width to SIMD16 in such cases for the moment in order to make the CI
happy on ICL with SIMD32 fragment shaders enabled.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently the "Source0 Alpha Present to RenderTarget" bit of the RT
write message header is derived from brw_wm_prog_data::replicate_alpha.
However the src0_alpha payload is provided anytime it's specified to
the logical message. This could theoretically lead to an
inconsistency if somebody provided a src0_alpha value while
brw_wm_prog_data::replicate_alpha was false, as I'm planning to do in
a future commit in order to implement a hardware workaround.
Instead calculate the header bit based on whether a src0_alpha value
was provided to the logical message, which guarantees the same
behavior on pre-ICL and ICL+ (the latter used an extended descriptor
bit for this which didn't suffer from the same issue). Remove the
brw_wm_prog_data::replicate_alpha flag.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This involves permuting the registers of barycentric vectors to have
the standard X[0-n] Y[0-n] layout at NIR translation time.
Barycentrics are converted to the format expected by the PLN
instruction in the lower_barycentrics() pass run after the
optimization loop.
Main reason is correctness of SIMD32 fragment shaders. The
shuffle_from_pln_layout() and shuffle_to_pln_layout() helpers used
during NIR translation are busted for SIMD32. This leads to serious
corruption at present with INTEL_DEBUG=do32, especially on Gen11+
where these helpers are hit more frequently due to the lack of a
hardware PLN instruction.
Of course one could have chosen to fix those helpers instead, but
there is another far more subtle issue that was reported during review
of the SIMD32 fragment shader codegen changes: The SIMD splitting pass
currently handles SIMD32 barycentric vectors as if they had the
standard X[0-n] Y[0-n] layout, even though they are interleaved for
the PLN instruction, which causes incorrect execution masks to be
applied to the MOVs unzipping barycentric vectors in cases where a
LINTERP instruction occurs under non-uniform control flow.
I'm not aware of any conformance regressions due to the latter issue
at present, but for our peace of mind let's move the conversion to the
PLN layout into the lower_barycentrics() pass run after
lower_simd_width().
This leads to the following shader-db improvements (including SIMD32
shaders) in combination with the previous back-end preparation changes
-- Without them (especially the copy propagation changes) this would
lead to a massive number of regressions. On ICL:
total instructions in shared programs: 20662316 -> 20466903 (-0.95%)
instructions in affected programs: 10538474 -> 10343061 (-1.85%)
helped: 68775
HURT: 6
total spills in shared programs: 8938 -> 8748 (-2.13%)
spills in affected programs: 376 -> 186 (-50.53%)
helped: 9
HURT: 5
total fills in shared programs: 8965 -> 8663 (-3.37%)
fills in affected programs: 965 -> 663 (-31.30%)
helped: 9
HURT: 6
LOST: 146
GAINED: 43
On SKL:
total instructions in shared programs: 18725867 -> 18614912 (-0.59%)
instructions in affected programs: 3876590 -> 3765635 (-2.86%)
helped: 27492
HURT: 2
LOST: 191
GAINED: 417
On SNB:
total instructions in shared programs: 14573613 -> 13980646 (-4.07%)
instructions in affected programs: 5199074 -> 4606107 (-11.41%)
helped: 29998
HURT: 0
LOST: 21
GAINED: 30
Results are somewhat less impressive but still significant without
SIMD32 fragment shaders enabled. On ICL:
total instructions in shared programs: 16148728 -> 16061659 (-0.54%)
instructions in affected programs: 6114788 -> 6027719 (-1.42%)
helped: 42046
HURT: 6
total spills in shared programs: 8218 -> 8028 (-2.31%)
spills in affected programs: 376 -> 186 (-50.53%)
helped: 9
HURT: 5
total fills in shared programs: 8953 -> 8651 (-3.37%)
fills in affected programs: 965 -> 663 (-31.30%)
helped: 9
HURT: 6
LOST: 0
GAINED: 3
On SKL:
total instructions in shared programs: 14927994 -> 14926738 (-0.01%)
instructions in affected programs: 168850 -> 167594 (-0.74%)
helped: 711
HURT: 2
On SNB:
total instructions in shared programs: 10770538 -> 10734403 (-0.34%)
instructions in affected programs: 2702172 -> 2666037 (-1.34%)
helped: 17818
HURT: 0
All of the hurt shaders are either spilling slightly more or emitting
additional NOP instructions due to the SIMD16 POW workaround for
Gen8-9 combined with differences in scheduling.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to change the layout of barycentric vectors, which will
involve permuting the GRFs of barycentrics fetched from the thread
payload. Make room for this in a function separate from the generic
fetch_payload_reg(), since the permutation will only be applicable to
barycentric vectors. This allows simplifying fetch_payload_reg(),
since there was no need for handling multiple-component payload
registers except for barycentrics.
This causes some minor shader-db noise due to the new helper emitting
a LOAD_PAYLOAD instruction unconditionally, but it will be cleaned up
shortly.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This prevents regressions on SNB due to the redundant MOVs lying
around in cases where fetch_payload_reg() returns a VGRF (currently
only in SIMD32 but soon in pretty much all cases). The MOVs can't be
register-coalesced due to their source being a FIXED_GRF, and they
can't be copy-propagated either due to the unlit centroid workaround
partial writes. They can be copy-propagated just fine into a SEL
instruction though.
On SNB this prevents the following shader-db regressions (including
SIMD32 programs) in combination with the interpolation rework part of
this series:
total instructions in shared programs: 13996898 -> 14001982 (0.04%)
instructions in affected programs: 197461 -> 202545 (2.57%)
helped: 0
HURT: 1251
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Remove emit_alpha_to_coverage workaround from backend compiler and start
using ported workaround from NIR.
v2: Copy comment from brw_fs_visitor (Caio Marcelo de Oliveira Filho)
Fixes piglit test on HSW:
- arb_sample_shading-builtin-gl-sample-mask-mrt-alpha-to-coverage-combinations
Signed-off-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
The WAIT instruction has been removed, but SYNC.bar can be used
instead to wait for a notification on n0.0.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We need this function to emit code that setups the control register
later with the defined execution mode for the shader. Therefore, we
emit it as the first instruction.
v2:
- Fix bug in setting the default mode mask in brw_rnd_mode_from_nir().
- Fix support for rounding modes in brw_rnd_mode_from_nir().
v3:
- Updated to renamed shader info member and enum values (Andres).
v4:
- Add actual emission as first instruction of emit_nir_code (Caio).
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
This reverts commit c0504569ea. Now that
we're doing interpolation lowering in NIR, we can continue to stride the
FS input registers directly in the brw_fs_nir code like we did before.
This fixes SIMD32 fragment shaders which broke because lower_simd_width
depended on the 0 stride to split PLN instructions correctly.
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
It's not used by anything anymore now that so much lowering has been
moved into NIR. Sadly, we still need on in brw_compile_gs() for
geometry shaders on Sandy Bridge. Short of a lot of pointless work,
that one's probably not going away.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It'll grow further, and we'd like to avoid adding an additional
parameter to fs_generator() for each new piece of data.
v2 (idr): Rebase on 17 months. Track a visitor instead of a cfg.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
This allows us to drop legacy userclip plane handling in both the vec4
and FS backends, and simplifies a few interfaces.
v2 (Jason Ekstrand):
- Move brw_nir_lower_legacy_clipping to brw_nir_uniforms.cpp because
it's i965-specific.
- Handle adding the params in brw_nir_lower_legacy_clipping
- Call brw_nir_lower_legacy_clipping from brw_codegen_vs_prog
Co-authored-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Right now, all keys have two things in common: a program string ID and a
sampler_prog_key_data. I'd like to add another thing or two and need a
place to put it. This commit adds a new brw_base_prog_key struct which
contains those two common bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
One cannot write the URB arbitrarily and therefore the message
has to be carefully constructed. The clever tricks originate
from Kenneth and Jason, I'm just writing the patch.
Fixes GPU hangs on ICL with Vulkan CTS.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Move the scalar-region conversion from the IR to the generator, so it
doesn't affect the Gen11 path. We need the non-scalar regioning
for a later lowering pass that we are adding.
v2: Better commit message (Matt)
Reviewed-by: Matt Turner <mattst88@gmail.com>
We add two new texture sources for bindless surface and sampler handles.
Bindless surface handles are expected to be pre-shifted so that the
20-bit surface state table index is in the top 20 bits of the 32-bit
handle. This lets us avoid any extra shifts in the shader. Bindless
sampler handles are 32-byte aligned byte offsets from general state base
address. We use 32-byte aligned instead of 16-byte aligned to avoid
having to use more indirect messages than needed. It means we can't
tightly pack samplers but that's probably not a big deal.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
From "Alpha Coverage" section of SKL PRM Volume 7:
"If Pixel Shader outputs oMask, AlphaToCoverage is disabled in
hardware, regardless of the state setting for this feature."
From OpenGL spec 4.6, "15.2 Shader Execution":
"The built-in integer array gl_SampleMask can be used to change
the sample coverage for a fragment from within the shader."
From OpenGL spec 4.6, "17.3.1 Alpha To Coverage":
"If SAMPLE_ALPHA_TO_COVERAGE is enabled, a temporary coverage value
is generated where each bit is determined by the alpha value at the
corresponding sample location. The temporary coverage value is then
ANDed with the fragment coverage value to generate a new fragment
coverage value."
Similar wording could be found in Vulkan spec 1.1.100
"25.6. Multisample Coverage"
Thus we need to compute alpha to coverage dithering manually in shader
and replace sample mask store with the bitwise-AND of sample mask and
alpha to coverage dithering.
The following formula is used to compute final sample mask:
m = int(16.0 * clamp(src0_alpha, 0.0, 1.0))
dither_mask = 0x1111 * ((0xfea80 >> (m & ~3)) & 0xf) |
0x0808 * (m & 2) | 0x0100 * (m & 1)
sample_mask = sample_mask & dither_mask
Credits to Francisco Jerez <currojerez@riseup.net> for creating it.
It gives a number of ones proportional to the alpha for 2, 4, 8 or 16
least significant bits of the result.
GEN6 hardware does not have issue with simultaneous usage of sample mask
and alpha to coverage however due to the wrong sending order of oMask
and src0_alpha it is still affected by it.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109743
Signed-off-by: Danylo Piliaiev <danylo.piliaiev@globallogic.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
