We can generate the XML if anybody actually queries it, but this reduces
the amount of work in driver setup and means that we'll be able to support
driconf option queries on Android without libexpat.
This updates the driconf interface struct version for i965, i915, and
radeon to use the new getXml entrypoint to call the on-demand xml
generation. Note that our loaders (egl, glx) implement the v2 function
interface and don't use .xml when that's set, and the X server doesn't use
this interface at all.
XML generation tested on iris and i965 using adriconf
Acked-by: Eric Engestrom <eric@engestrom.ch>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6916>
This is needed to implement the EXT_EGL_image_storage spec:
"If <target> is GL_TEXTURE_2D, then the resultant texture must have a
sized internal format which is colorspace and size compatible with the
dma-buf. If the GL is unable to determine such a format, the error
INVALID_OPERATION is generated."
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
As requested by Tim.
This was generated with:
grep 'PIPE_ARCH_.*_ENDIAN' -rIl | xargs sed -ie 's@PIPE_ARCH_\(.*\)_ENDIAN@UTIL_ARCH_\1_ENDIAN@'g
v2: - add this patch
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
This will allow it to be used as a drop in replacement for
_mesa_little_endian in a number of cases.
v2: - Always define PIPE_ARCH_LITTLE_ENDIAN and PIPE_ARCH_BIG_ENDIAN,
define the one that reflects the host system to 1 and the other to 0
- replace all uses of #ifdef, #ifndef, and #if defined() with #if
and #if ! with PIPE_ARCH_*_ENDIAN
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
This is the layout used in the GL API, and maps directly to PIPE
formats with no endianness trickery. As with the LA change, this
fixes big-endian fetching from texbos. Also cleans up some endian
shenanigans in shader images.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The array format is what the GL API wants (fixing texbos on
big-endian), and matches directly to gallium's corresponding array
format. The only driver exposing A8L8 was radeon/r200 in big-endian,
where the HW's underlying format was trying to read as array and we
needed to flip things around to make our packed format come out right
(note that while the radeon format tables had both AL and LA,
ChooseTextureFormat would only pick one of them based on endianness).
v2: Don't make r200/radeon use endian swaps.
v3: Rebase on dropping the r200 _be/_le format table removal patch
v4: reword commit message to explain why we can drop both formats
from radeon.
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
The array format is what the GL API wants (and we made a mistake in
the format returned for texbos on big-endian!), and it's exactly what
the gallium-side PIPE_FORMAT_L16A16 is. The only downside is that
dri_util tries to fall back to sampling RG16 using LA16, which doesn't
have a match for big-endian any more. No HW drivers supported A16L16
anyway.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Vulkan applications can register with the following structure :
typedef struct VkApplicationInfo {
VkStructureType sType;
const void* pNext;
const char* pApplicationName;
uint32_t applicationVersion;
const char* pEngineName;
uint32_t engineVersion;
uint32_t apiVersion;
} VkApplicationInfo;
This enables the Vulkan implementations to apply workarounds based off
matching this description.
Here we add a new parameter for matching the driconfig options with
the following :
<device driver="anv">
<application engine_name_match="MyOwnEngine.*" engine_versions="10:12,40:42">
<option name="blaaah" value="true" />
</application>
</device>
v2: switch engine name match to use regexps
v3: Verify that the regexec returns REG_NOMATCH for match failure (Eric)
v4: Add missing bit that went to the following commit (Eric)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Cc: 19.2 <mesa-stable@lists.freedesktop.org>
Add dri formats for RGBA ordered 64 bpp IEEE 754 half precision floating
point. Leverage existing offscreen render support for
MESA_FORMAT_RGBA_FLOAT16 and MESA_FORMAT_RGBX_FLOAT16.
Signed-off-by: Kevin Strasser <kevin.strasser@intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Define extensions DRI_MutableRenderBufferDriver and
DRI_MutableRenderBufferLoader. These are the two halves for
EGL_KHR_mutable_render_buffer.
Outside the DRI code there is one additional change. Add
gl_config::mutableRenderBuffer to match
__DRI_ATTRIB_MUTABLE_RENDER_BUFFER. Neither are used yet.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
i965 advertises the 16-bit R and RG formats through
eglQueryDmaBufFormatsEXT but falls over when a client tries to use or
asks more information about such a format because
driImageFormatToGLFormat returns MESA_FORMAT_NONE.
Found by Eero Tamminen.
v2: Add G16R16 formats (Lionel)
v3: Fix G16R16 mapping to mesa format (Jason)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106642
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com> (v2)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
---
v2: rebased on top of 432df741e0 "dri_util: Add
R10G10B10{A,X}2 translation between DRI and mesa_format."
0 is not a valid value for the __DRI_IMAGE_FORMAT_* enum.
It is, however, the value of MESA_FORMAT_NONE, which two of the callers
(i915 & i965) checked for.
The other callers (that check for errors, ie. st/dri) already check for
__DRI_IMAGE_FORMAT_NONE.
Signed-off-by: Eric Engestrom <eric.engestrom@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Just let validate_context_version() do it instead. This fixes
MESA_GL_VERSION_OVERRIDE for compat, it will also allow us to
enable new compat versions on a per driver bases in future.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Add format definition and required plumbing to create images.
Note that there is no match to drm_fourcc definition, just like
with existing _DRI_IMAGE_FOURCC_SARGB8888.
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Currently, any driver that does not support the ARB_compatibility
extension will fail on GL3.1 context creation if the application does
not request the forward-compatiblity flag.
Restore the original check which changes mesa_api to API_OPENGL_CORE,
only when:
- GL3.1 is requested, without the forward-compatiblity flag.
- driver does not support ARB_compatibility - as deduced by
max_gl_compat_version.
Fixes: a0c8b49284 ("mesa: enable OpenGL 3.1 with ARB_compatibility")
v2:
- Improve commit log (Emil).
- Provide a correct explanation on the features documentation (Ian).
Cc: Marek Olšák <marek.olsak@amd.com>
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Eric Engestrom <eric.engestrom@imgtec.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This way we won't fail when validating just because we may have a non
overriden core version that is lower than the requested one, even when
the compat version is high enough.
For example, running glcts from VK-GL-CTS with i965, this will
succeed:
$ MESA_GL_VERSION_OVERRIDE=4.6 ./glcts --deqp-case=KHR-GL46.info.vendor
While, this will fail:
$ MESA_GL_VERSION_OVERRIDE=4.6COMPAT ./glcts --deqp-case=KHR-GL46.info.vendor
Fixes: 464c56d3d5 ("dri_util: Use
_mesa_override_gl_version_contextless")
Cc: Ian Romanick <ian.d.romanick@intel.com>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This is unused because it's for libGL/libEGL, not drivers.
v2: i965 was wrong, because it used dri_util instead of its own config.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Some clients may not like RGB10X2 and RGB10A2 fbconfigs and
visuals. Add a new driconf option 'allow_rgb10_configs' to
allow per application enable/disable.
The option defaults to enabled.
v2: Rename expose_rgb10_configs to allow_rgb10_configs,
as suggested by Emil. Add comment to option parsing,
to make sure it stays before the ->InitScreen().
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Previously the CreateContext method of __DriverApiRec took a set of
arguments to describe the attribute values from the window system API's
CreateContextAttribs function. As more attributes get added this could
quickly get unworkable and every new attribute needs a modification for
every driver.
To fix that, pass the attribute values in a struct instead. The struct
has a bitmask to specify which members are used. The first three members
(two for the GL version and one for the flags) are always set. If the
bit is not set in the attribute mask then it can be assumed the
attribute has the default value. Drivers will error if unknown bits in
the mask are set.
Reviewed-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Neil Roberts <neil@linux.intel.com>
Jump through the layers of abstraction between egl and dri in order to
feed the context priority attribute through to the backend. This
requires us to read the value from the base _egl_context, convert it to
a DRI attribute, parse it again in the generic context creator before
passing it to the driver as a function parameter.
In order to not require us to pass back the actual value of the context
priority after creation, we impose that drivers should report the
available set of priorities during screen setup (and then they may chose
to fail if given an invalid value as that should have been checked at
the user boundary.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Ben Widawsky <ben@bwidawsk.net> # i915/i965
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The attribMap had two entries for this attribute, and
driGetConfigAttribIndex didn't return a proper value for this attribute.
Fix this, and also make sure we return SWAP_UNDEFINED for single-buffer
configs as required by the GLX_OML_swap_method spec.
Finally bump the dri core extension version to 2, indicating that we
correctly report __DRI_ATTRIB_SWAP_METHOD.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
This basic extension allows usage of the __DRI_CTX_FLAG_NO_ERROR flag.
This includes support code for classic Mesa drivers to switch on the
no-error mode if the flag is set.
v2: Move to common DRI code.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The GLX specification says about glXDestroyPixmap:
"The storage for the GLX pixmap will be freed when it is not current
to any client."
We're not really following this language to the letter: some of the storage
is freed immediately (in particular, the dri3_drawable, which contains both
GLXDRIdrawable and loader_dri3_drawable). So we NULL out the pointers to
that freed storage; the previous patches added the corresponding NULL-pointer
checks.
This fixes memory corruption in piglit
./bin/glx-visuals-depth/stencil -pixmap -auto
Cc: 17.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
This allows eglCreateImageKHR to access P010 surfaces created by vaapi
Signed-off-by: Rainer Hochecker <fernetmenta@online.de>
Acked-by: Ben Widawky <ben@bwidawsk.net>
driCreateContextAttribs() emits an error if bit
__DRI_CTX_FLAG_ROBUST_BUFFER_ACCESS is set for an ES context. But,
EGL_EXT_create_context_robustness and EGL 1.5 both allow creation of
robust ES contexts. One requests a robust ES context by setting the
EGL_CONTEXT_OPENGL_ROBUST_ACCESS *attribute*, which Mesa's EGL layer
translates into the __DRI_CTX_FLAG_ROBUST_BUFFER_ACCESS *bit*.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
As of last commit the only user of it (radeon/r200) no longer uses it.
As such let's remove it and cleanup the nasty hacks that we had in place
to support this.
v2: Leave LIBDRM_CFLAGS around.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> (v1)
Reviewed-by: Marek Olšák <marek.olsak@amd.com> (v1)
This function is for deleting per-screen resources, and the shader
compiler resources are not of such nature. Besides, dri shouldn't
need to even know about the presence of a shader compiler.
These resources will already be released when mesa gets unloaded,
and that should be sufficient.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Remove _mesa_get_gl_version_override. We don't need two functions that
do basically the same thing. This change seemed easier (esp. with the
next patch) than going the other way.
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
The latest version of the specs explicitly allow it, and given that Mesa
universally supports KHR_debug we should definitely support it.
Totally untested. (Just happened to noticed this while implementing
GLX_EXT_create_context_es2_profile for st/xlib.)
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
driUnbindContext() checks for valid drawables before calling the driver
unbind function. In case of Surfaceless contexts, the drawables are always
Null and we end up not releasing the underlying DRI context. Moving the
call to the driver function before the drawable validity checks fixes things.
Steps to trigger this bug are following:
- create surfaceless context and make it current
- make some other context current
- {another thread} destroy surfaceless context
- make another context current
Signed-off-by: Alexandros Frantzis <Alexandros.Frantzis@canonical.com>
Signed-off-by: Kalyan Kondapally <kalyan.kondapally@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=74563
