It's not used by anything anymore now that so much lowering has been
moved into NIR. Sadly, we still need on in brw_compile_gs() for
geometry shaders on Sandy Bridge. Short of a lot of pointless work,
that one's probably not going away.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This commit is all annoying plumbing work which just adds support for a
new brw_compile_stats struct. This struct provides a binary driver
readable form of the same statistics we dump out to stderr when we
INTEL_DEBUG is set with a shader stage.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
It'll grow further, and we'd like to avoid adding an additional
parameter to fs_generator() for each new piece of data.
v2 (idr): Rebase on 17 months. Track a visitor instead of a cfg.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
The rules for gl_SubgroupSize in Vulkan require that it be a constant
that can be queried through the API. However, all GL requires is that
it's a uniform. Instead of always claiming that the subgroup size in
the shader is 32 in GL like we have to do for Vulkan, claim 8 for
geometry stages, the maximum for fragment shaders, and the actual size
for compute.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Right now, all keys have two things in common: a program string ID and a
sampler_prog_key_data. I'd like to add another thing or two and need a
place to put it. This commit adds a new brw_base_prog_key struct which
contains those two common bits.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that NIR_TEST_* doesn't swap the shader out from under us, it's
sufficient to just modify the shader rather than having to return in
case we're testing serialization or cloning.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Our tessellation control shaders can be dispatched in several modes.
- SINGLE_PATCH (Gen7+) processes a single patch per thread, with each
channel corresponding to a different patch vertex. PATCHLIST_N will
launch (N / 8) threads. If N is less than 8, some channels will be
disabled, leaving some untapped hardware capabilities. Conditionals
based on gl_InvocationID are non-uniform, which means that they'll
often have to execute both paths. However, if there are fewer than
8 vertices, all invocations will happen within a single thread, so
barriers can become no-ops, which is nice. We also burn a maximum
of 4 registers for ICP handles, so we can compile without regard for
the value of N. It also works in all cases.
- DUAL_PATCH mode processes up to two patches at a time, where the first
four channels come from patch 1, and the second group of four come
from patch 2. This tries to provide better EU utilization for small
patches (N <= 4). It cannot be used in all cases.
- 8_PATCH mode processes 8 patches at a time, with a thread launched per
vertex in the patch. Each channel corresponds to the same vertex, but
in each of the 8 patches. This utilizes all channels even for small
patches. It also makes conditions on gl_InvocationID uniform, leading
to proper jumps. Barriers, unfortunately, become real. Worse, for
PATCHLIST_N, the thread payload burns N registers for ICP handles.
This can burn up to 32 registers, or 1/4 of our register file, for
URB handles. For Vulkan (and DX), we know the number of vertices at
compile time, so we can limit the amount of waste. In GL, the patch
dimension is dynamic state, so we either would have to waste all 32
(not reasonable) or guess (badly) and recompile. This is unfortunate.
Because we can only spawn 16 thread instances, we can only use this
mode for PATCHLIST_16 and smaller. The rest must use SINGLE_PATCH.
This patch implements the new 8_PATCH TCS mode, but leaves us using
SINGLE_PATCH by default. A new INTEL_DEBUG=tcs8 flag will switch to
using 8_PATCH mode for testing and benchmarking purposes. We may
want to consider using 8_PATCH mode in Vulkan in some cases.
The data I've seen shows that 8_PATCH mode can be more efficient in
some cases, but SINGLE_PATCH mode (the one we use today) is faster
in other cases. Ultimately, the TES matters much more than the TCS
for performance, so the decision may not matter much.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
libintel_common depends on libintel_compiler, but it contains debug
functionality that is needed by libintel_compiler. Break the circular
dependency by moving gen_debug files to libintel_dev.
Suggested-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This moves nir_shader_clone() to the driver-specific compile function,
rather than the shared src/intel/compiler code. This allows i965 to do
key-specific passes before calling brw_compile_*. Vulkan should not
need this cloning as it doesn't compile multiple variants.
We do need to continue cloning in the compute shader code because we
lower various things in NIR based on the SIMD width.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
As of this commit, all uses of const sources either go through a
nir_src_as_<type> helper which handles bit sizes correctly or else are
accompanied by a nir_src_bit_size() == 32 assertion to assert that we
have the size we think we have.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
These days, we're just passing a pointer to a prog_data field, which
we already have access to. We can just use it directly.
(In the past, it was a pointer to a separate value.)
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This will be used by the on disk shader cache.
v2:
* Set in brw_compile_* rather than brw_codegen_*. (Jason)
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
[jordan.l.justen@intel.com: Only add to brw_stage_prog_data]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v1: By Ben Widawsky <benjamin.widawsky@intel.com>
v2: v1 had an assert only for VS. Add the restriction for GS, HS and
DS as well and make sure the allocated sizes are not multiple of 3.
v3: Move the entry_size checks in to compiler code (Ken)
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The only thing still using it is INVOCATION_ID for geometry shaders.
That's easily enough inlined into the nir_intrinsic_load_invocation_id
handling code.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're already doing this in the FS back-end. This just does the same
thing in the vec4 back-end.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit e1af20f18a changed the shader_info
from being embedded into being just a pointer. The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct. This, however, has
caused a few problems:
1) There are many things which generate NIR without GLSL. This means
we have to support both NIR shaders which come from GLSL and ones
that don't and need to have an info elsewhere.
2) The solution to (1) raises all sorts of ownership issues which have
to be resolved with ralloc_parent checks.
3) Ever since 00620782c9, we've been
using nir_gather_info to fill out the final shader_info. Thanks to
cloning and the above ownership issues, the nir_shader::info may not
point back to the gl_shader anymore and so we have to do a copy of
the shader_info from NIR back to GLSL anyway.
All of these issues go away if we just embed the shader_info in the
nir_shader. There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.
Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Mostly a dummy git mv with a couple of noticable parts:
- With the earlier header cleanups, nothing in src/intel depends
files from src/mesa/drivers/dri/i965/
- Both Autoconf and Android builds are addressed. Thanks to Mauro and
Tapani for the fixups in the latter
- brw_util.[ch] is not really compiler specific, so it's moved to i965.
v2:
- move brw_eu_defines.h instead of brw_defines.h
- remove no-longer applicable includes
- add missing vulkan/ prefix in the Android build (thanks Tapani)
v3:
- don't list brw_defines.h in src/intel/Makefile.sources (Jason)
- rebase on top of the oa patches
[Emil Velikov: commit message, various small fixes througout]
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
