This introduces new vec8 and vec16 instructions (which are the only
instructions taking more than 4 sources), in order to construct 8 and 16
component vectors.
In order to avoid fixing up the non-autogenerated nir_build_alu() sites
and making them pass 16 src args for the benefit of the two instructions
that take more than 4 srcs (ie vec8 and vec16), nir_build_alu() is has
nir_build_alu_tail() split out and re-used by nir_build_alu2() (which is
used for the > 4 src args case).
v2 (Karol Herbst):
use nir_build_alu2 for vec8 and vec16
use python's array multiplication syntax
add nir_op_vec helper
simplify nir_vec
nir_build_alu_tail -> nir_builder_alu_instr_finish_and_insert
use nir_build_alu for opcodes with <= 4 sources
v3 (Karol Herbst):
fix nir_serialize
v4 (Dave Airlie):
fix serialization of glsl_type
handle vec8/16 in lowering of bools
v5 (Karol Herbst):
fix load store vectorizer
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a NIR instrinsic that represent a memory barrier in SPIR-V /
Vulkan Memory Model, with extra attributes that describe the barrier:
- Ordering: whether is an Acquire or Release;
- "Cache control": availability ("ensure this gets written in the memory")
and visibility ("ensure my cache is up to date when I'm reading");
- Variable modes: which memory types this barrier applies to;
- Scope: how far this barrier applies.
Note that unlike in SPIR-V, the "Storage Semantics" and the "Memory
Semantics" are split into two different attributes so we can use
variable modes for the former.
NIR passes that took barriers in consideration were also changed
- nir_opt_copy_prop_vars: clean up the values for the mode of an
ACQUIRE barrier. Copy propagation effect is to "pull up a load" (by
not performing it), which is what ACQUIRE restricts.
- nir_opt_dead_write_vars and nir_opt_combine_writes: clean up the
pending writes for the modes of an RELEASE barrier. Dead writes
effect is to "push down a store", which is what RELEASE restricts.
- nir_opt_access: treat the ACQUIRE and RELEASE as a full barrier for
the modes. This is conservative, but since this is a GL-specific
pass, doesn't make a difference for now.
v2: Fix the scoped barrier handling in copy propagation. (Jason)
Add scoped barrier handling to nir_opt_access and
nir_opt_combine_writes. (Rhys)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is like nir_texop_tex, but signals that the sampling coordinates
are immutable during the shader stage, in a way that allows the HW
that supports pre-dispatching sampling operations to pre-fetch
the result prior to scheduling the shader stage.
This is introduced to support the feature in Freedreno. Adreno HW
from a4xx supports it.
A NIR pass introduced later in this series will detect sampling
operations that are eligible for pre-dispatch, and replace
nir_texop_tex by this new op, to tell the backend to enable
pre-fetch.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
This introduces two new lowering passes. One to lower VS to explicit
outputs using STLW and one to lower GS to load input using LDLW and
implement the GS specific functionality.
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
They indicate the operation does not cause overflow or underflow.
This is motivated by SPIR-V decorations NoSignedWrap and
NoUnsignedWrap.
Change the storage of `exact` to be a single bit, so they pack
together.
v2: Handle no_wrap in nir_instr_set. (Karol)
v3: Use two separate flags, since the NIR SSA values and certain
instructions are typeless, so just no_wrap would be insufficient
to know which one was referred to. (Connor)
v4: Don't use nir_instr_set to propagate the flags, unlike `exact`,
consider the instructions different if the flags have different
values. Fix hashing/comparing. (Jason)
Reviewed-by: Karol Herbst <kherbst@redhat.com> [v1]
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Most places in NIR, we treat matrices like arrays. The one annoying
exception to this has been nir_constant where a matrix is a first-class
thing. This commit changes that so a matrix nir_constant is the same as
an array nir_constant. This makes matrix nir_constants a tiny bit more
expensive but shrinks all others by 96B.
Reviewed-by: Karol Herbst <kherbst@redhat.com>
In the next commit, we'll properly handle access qualifiers on struct
members by propagating them to load/store instructions, but these
instructions had no way to specify the qualifier.
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
This type information will be used by gather_ssa_types to get usable results
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
v2: remove & operator in a couple of memsets
add some memsets
v3: fixup lima
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> (v2)
This commit adds new nir_load/store_scratch opcodes which read and write
a virtual scratch space. It's up to the back-end to figure out what to
do with it and where to put the actual scratch data.
v2: Drop const_index comments (by anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
We have a pass to lower global registers to locals and many drivers
dutifully call it. However, no one ever creates a global register ever
so it's all dead code. It's time we bury it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
All we ever do is initialize it to zero, clone it, print it, and
validate it. No one ever sets or uses it.
Acked-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
On Intel, we have both bindless and bindful and we'd like to use them at
the same time if we can so we need to be able to distinguish at the NIR
level between the two. This also fixes nir_lower_tex to properly handle
bindless in its tex_texture_size and get_texture_lod helpers.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Values inside the offsets parameter of textureGatherOffsets are required to be
constants in the range of [GL_MIN_PROGRAM_TEXTURE_GATHER_OFFSET,
GL_MAX_PROGRAM_TEXTURE_GATHER_OFFSET].
As this range is never outside [-32, 31] for all existing drivers inside mesa,
we can simply store the offsets as a int8_t[4][2] array inside nir_tex_instr.
Right now only Nvidia hardware supports this in hardware, so we can turn this
on inside Nouveau for the NIR path as it is already enabled with the TGSI one.
v2: use memcpy instead of for loops
add missing bits to nir_instr_set
don't show offsets if they are all 0
v3: default offsets aren't all 0
v4: rename offsets -> tg4_offsets
rename nir_tex_instr_has_explicit_offsets -> nir_tex_instr_has_explicit_tg4_offsets
Signed-off-by: Karol Herbst <kherbst@redhat.com>
We were printing only when the channel was exactly the start channel, so
scalarized loads/stores would be missing the name on the rest.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Replace calls to create hash tables and sets that use
_mesa_hash_pointer/_mesa_key_pointer_equal with the helpers
_mesa_pointer_hash_table_create() and _mesa_pointer_set_create().
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric@engestrom.ch>
the naming is a bit confusing no matter how you look at it. Within SPIR-V
"global" memory is memory accessible from all threads. glsl "global" memory
normally refers to shader thread private memory declared at global scope. As
we already use "shared" for memory shared across all thrads of a work group
the solution where everybody could be happy with is to rename "global" to
"private" and use "global" later for memory usually stored within system
accessible memory (be it VRAM or system RAM if keeping SVM in mind).
glsl "local" memory is memory only accessible within a function, while SPIR-V
"local" memory is memory accessible within the same workgroup.
v2: rename local to function as well
v3: rename vtn_variable_mode_local as well
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
These correspond directly to SPIR-V's OpPtrAccessChain. As such, they
treat whatever their parent gives them as if it's the first element in
some array and dereferences that array. If the parent is, itself, an
array deref, then the two indices can just be added together to get the
final array deref. However, it can also be used in cases where what you
have is a dereference to some random vec2 value somewhere. In this
case, we require a cast before the ptr_as_array and use the ptr_stride
field in the cast to provide a stride for the ptr_as_array derefs.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Previously, NIR had a single nir_var_uniform mode used for atomic
counters, UBOs, samplers, images, and normal uniforms. This commit
splits this into nir_var_uniform and nir_var_ubo where nir_var_uniform
is still a bit of a catch-all but the nir_var_ubo is specific to UBOs.
While we're at it, we also rename shader_storage to ssbo to follow the
convention.
We need this so that we can distinguish between normal uniforms and UBO
access at the deref level without going all the way back variable and
seeing if it has an interface type.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Makes debugging easier when we care about the deref chain and not the
deref instruction itself. To make it take a const pointer, constify
some of the static functions in nir_print.c.
Reviewed-by: Eric Anholt <eric@anholt.net>
This is a squash of a few distinct changes:
glsl,spirv: Generate 1-bit Booleans
Revert "Use 32-bit opcodes in the NIR producers and optimizations"
Revert "nir/builder: Generate 32-bit bool opcodes transparently"
nir/builder: Generate 1-bit Booleans in nir_build_imm_bool
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This commit adds support for 1-bit Booleans and integers. Booleans
obviously take a value of true or false. Because we have to define the
semantics of 1-bit signed and unsigned integers, we define uint1_t to
take values of 0 and 1 and int1_t to take values of 0 and -1. 1-bit
arithmetic is then well-defined in the usual way, just with fewer bits.
The definition of int1_t and uint1_t doesn't usually matter but we do
need something for purposes of constant folding.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This helps a lot when debugging image load/store lowering on large
testcases. Unfortunately the Mesa enum name stuff is under src/mesa and
we can't get at it from the compiler.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We normally call with stderr which is unbuffered, so this won't affect
that, but it does let me call nir_print_shader(nir, fopen("log", "w+"))
from gdb and actually get the whole shader in my file.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
This also changes spirv_to_nir and glsl_to_nir to set them. The one
place that doesn't set them is shared memory access lowering in
nir_lower_io. That will have to be updated before any consumers of it
can effectively use these new alignments.
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Acked-by: Karol Herbst <kherbst@redhat.com>
