This allows mediump inputs and outputs to be trivially lowered into packed
16-bit varyings where 1 slot is occupied by 2 16-bit vec4s, without any
packing instructions in NIR and without any conflicts with 32-bit varyings.
The only thing that is changed is IO semantics in intrinsics to get packed
16-bit varyings.
This simplifies supporting 16-bit types for drivers that have 32-bit slots
everywhere except the fragment shader where they can do 16-bit interpolation
on either the low or high half of each slot.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9050>
Like SPIR-V and GL_ARB_sparse_texture2, these return a residency code. It
is placed in the destination after the rest of the result. If it's zero,
then the texel is resident. Otherwise, it's not resident.
Besides the larger destination and the residency code, sparse fetches
work the same as normal fetches.
Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7774>
Halt is like a return for the entire shader or exit() if you prefer to
think of it that way. Once an invocation hits a halt, it's 100% dead.
Any writes to output variables which happened before the halt do,
however, still apply.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
If we were desperate to reduce bits, we could probably also use
shader_in/out for hit attributes as they really are an output from
intersection shaders and read-only in any-hit and closest-hit shaders.
However, other passes such as nir_gether_info like to assume that
anything with nir_var_shader_in/out is indexed using vec4 locations for
interface matching. It's easier to just add a new variable mode.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6479>
These are a bit more tricky than most because they're matrix system
values. We make the intentional choice here to not bother with allowing
indirect addressing of columns for these. Since they're system values,
they may be magically constructed somehow or come from weird hardware so
it's easier on back-ends to just handle any indirects with bcsel.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6479>
This new intrinsic is capable of handling the full range of conversions
from OpenCL including rounding modes and possible saturation. The
intention is that we'll emit this intrinsic directly from spirv_to_nir
and then lower it to ALU ops later.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
We're about to introduce conversion ops which are going to want two
different types. We may as well just split the one we have rather than
end up with three. There are a couple places where this is mildly
inconvenient but most of the time I find it to actually be nicer.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
For UBO accesses to be the same performance as classic GL default uniform
block uniforms, we need to be able to push them through the same path. On
freedreno, we haven't been uploading UBOs as push constants when they're
used for indirect array access, because we don't know what range of the
UBO is needed for an access.
I believe we won't be able to calculate the range in general in spirv
given casts that can happen, so we define a [0, ~0] range to be "We don't
know anything". We use that at the moment for all UBO loads except for
nir_lower_uniforms_to_ubo, where we now avoid losing the range information
that default uniform block loads come with.
In a departure from other NIR intrinsics with a "base", I didn't make the
base an be something you have to add to the src[1] offset. This keeps us
from needing to modify all drivers (particularly since the base+offset
thing can mean needing to do addition in the backend), makes backend
tracking of ranges easy, and makes the range calculations in
load_store_vectorizer reasonable. However, this could definitely cause
some confusion for people used to the normal NIR base.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6359>
The state->shader is missing when used outside of nir_print_shader, just
drop these details in that case. We can fix nir_print_instr() to look up
the shader, but let's also make sure that an instr detached from a shader
(such as one you're constructing but haven't yet inserted) still works.
Fixes: 2b1ef5df4e ("nir: print IO semantics (v2)")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6496>
Instead of having separate lists of variables, roughly sorted by mode,
use a single list for all shader-level NIR variables. This makes a few
list walks a bit longer here and there but list walks aren't a very
common thing in NIR at all. On the other hand, it makes a lot of things
like validation, printing, etc. way simpler. Also, there are a number
of cases where we move variables from inputs/outputs to globals and this
makes it way easier because we no longer have to move them between
lists. We only have to deal with that if moving them from the shader to
a nir_function_impl.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Whenever a struct type is decorated Block or BufferBlock we turn that
into a GLSL_TYPE_INTERFACE. Since these decorations can end up random
places, we should allow them for constants.
Closes: #3252
Fixes: 9d0ae777dd "spirv: Use interface type for block and buffer..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5855>
SPIRV OpControlBarrier can have both a memory and a control barrier
which some hardware can handle with a single instruction. Let's
turn the scoped_memory_barrier into a scoped barrier which can embed
both barrier types. Note that control-only or memory-only barriers can
be supported through this new intrinsic by passing NIR_SCOPE_NONE to the
unused barrier type.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
If a nir_variable is tagged with per_view, it must be an array with
size corresponding to the number of views. For slot-tracking, it is
considered to take just the slot for a single element -- drivers will
take care of expanding this appropriately.
This will be used to implement the ability of having per-view position
in a vertex shader in Intel platforms.
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Add a pointer_initializer field to nir_variable analogous to
constant_initializer, which can be used to initialize the nir_variable
to a pointer to another nir_variable. Just like the
constant_initializer, the pointer_initializer gets eliminated in the
nir_lower_constant_initializers pass.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>
This means you can directly use format utils on it without having to have
your own GL enum to number-of-components switch statement (or whatever) in
your vulkan backend.
Thanks to imirkin for fixing up the nouveau driver (and a couple of core
details).
This fixes the computed qualifiers for EXT_shader_image_load_store's
non-integer sizeNxM qualifiers, which we don't have tests for.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v3d)
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
A few hash_table users roll their own integer hash functions which
call _mesa_hash_data to perform the hashing which ultimately calls
into XXH32 with a dynamic key length. When using small keys with a
constant size the hash rate can be greatly improved by inlining
XXH32 and providing it a constant key length, see:
https://fastcompression.blogspot.com/2018/03/xxhash-for-small-keys-impressive-power.html
Additionally, this patch removes calls to _mesa_key_hash_string and
makes them instead call _mesa_has_string directly, matching the new
integer hash functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3475>
This introduces:
- nir_texop_fragment_mask_fetch (fetch a fragment mask from a
compressed multisampled color surface)
- nir_texop_fragment_fetch (fetch a color fragment for a
particular sample at corresponding fragment mask index).
These two texture operations are necessary for implementing
SPV_AMD_shader_fragment_mask.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3304>
