Add PIPE_CAP to determine if the GL extension
'GL_ARB_framebuffer_no_attachments' shall be
supported.
The driver is required to support 'PIPE_FORMAT_NONE'
via its 'is_format_supported()' callback in order
to determine the MSAA modes the hardware supports so
that values requested from the application using
'GL_ARB_framebuffer_no_attachments' may be quantized
to what the hardware expects.
V.2:
Fix doc for a more detailed description of the PIPE_CAP
and the corresponding GL constant.
V.3:
Renamed and repurposed once again.
V.4:
Remove CAP from cap_mapping array.
[airlied: fix damaged whitespace]
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
For radeonsi, native and TGSI use different compilers and this results
in different limits for different IR's.
The set we strictly need for radeonsi is only the MAX_BLOCK_SIZE
and MAX_THREADS_PER_BLOCK params, but I added a few others as shader
related that seemed like they would also typically depend on the
compiler.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Dave Airlie <airlied@redhat.com>
The value 0 for unknown has been chosen to so that
drivers using tgsi_scan_shader do not need to detect
missing properties if they zero-initialize the struct.
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Radeonsi needs to know which shader stage will execute after a shader
in order to make the best decision about which shader variant to compile
first.
This is only set for VS and TES, because we don't need it elsewhere.
VS has 3 variants:
- next shader is FS
- next shader is GS
- next shader is TCS
TES has 2 variants:
- next shader is FS
- next shader is GS
Currently, radeonsi always assumes the next shader is FS, which is suboptimal,
since st/mesa always knows which shader is next if the GLSL program is not
a "separate shader".
By default, ureg always sets "next shader is FS".
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
This cap indicates the supported representations of programs. It should
be a mask of pipe_shader_ir bits. It will allow to enable
ARB_compute_shader if the underlying driver supports TGSI.
Changes from v2:
- improve description of PIPE_SHADER_CAP_SUPPORTED_IRS
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This parameter is equivalent to the corresponding OpenGL implementation
limit which is in texels, not bytes.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This cap indicates whether pipe->create_surface can reinterpret a texture
as a surface with a format of different block width/height (but equal
block size).
v2: fix whitespace
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This cap indicates that the driver only supports R, RG, RGB and RGBA
formats for PIPE_BUFFER sampler views.
v2: move into "unsupported features" section for nouveau (Ilia Mirkin)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Since the GREMEDY extensions are normally only exposed by the gremedy
debugger (and could possibly trigger debug paths in the app), we don't
expose the extension by default, but instead only with
ST_DEBUG=gremedy.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This patch adds a new interface to support hardware mipmap generation.
PIPE_CAP_GENERATE_MIPMAP is added to allow a driver to specify
if this new interface is supported; if not supported, the state tracker will
fallback to mipmap generation by rendering/texturing.
v2: add PIPE_CAP_GENERATE_MIPMAP to the disabled section for all drivers
v3: add format to the generate_mipmap interface to allow mipmap generation
using a format other than the resource format
v4: fix return type of trace_context_generate_mipmap()
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It makes sense to re-use pipe->invalidate_resource for the purpose of
glInvalidateBufferData, but this function is already implemented in vc4
where it doesn't have the expected behavior. So add a capability flag
to indicate that the driver supports the expected behavior.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Specify that the operation only applies to the x component, not
per-component as previously specified. This is unnecessary for GL and
creates additional complications for images which need to support these
operations as well.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the state tracker to know that the various draw parameters
are available in vertex shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
This will allow gallium drivers to send messages to KHR_debug endpoints
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This avoids a serious r600g bug leading to a GPU hang.
The chances this bug will get fixed are pretty low now.
I deeply regret listening to others and not pushing this patch, leaving
other users with a GPU-crashing driver. Yes, it should be fixed
in the compiler and it's ugly, but users couldn't care less about that.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86720
Cc: 11.0 10.6 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
The TGSI usage mask can't be used, because these are declared as an output
array of 2 elements.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Required by ARB_sample_shading for drivers that don't want a shader variant
in st/mesa.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Roland Scheidegger <sroland@vmware.com>
PIPE_CAPs and TGSI support will be added later. The TGSI support should be
straightforward. We only need to split TGSI_FILE_RESOURCE into TGSI_FILE_IMAGE
and TGSI_FILE_BUFFER, though duplicating all opcodes shouldn't be necessary.
The idea is:
* ARB_shader_image_load_store should use set_shader_images.
* ARB_shader_storage_buffer_object should use set_shader_buffers(slots 0..M-1)
if M shader storage buffers are supported.
* ARB_shader_atomic_counters should use set_shader_buffers(slots M..N)
if N-M+1 atomic counter buffers are supported.
PIPE_CAPs can describe various constraints for early DX11 hardware.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
