This enables gallium support for EGL_ANDROID_native_fence_sync, for
drivers which support PIPE_CAP_NATIVE_FENCE_FD.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Drivers that support this benefit by saving one lowering pass in the
GLSL-to-TGSI conversion.
radeonsi already supports this because all outputs are stored in temporary
variables before the export (except for TCS outputs, which have always
been readable in TGSI anyway due to their special semantics).
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the driver to signal that it can't handle random
interleaving of attributes across buffers. This is required for
ARB_transform_feedback3, and it's initialized to whatever the previous
value of PIPE_CAP_STREAM_OUTPUT_PAUSE_RESUME was except for nv50 where
it is disabled. Note that the proprietary drivers never expose
ARB_transform_feedback3 on any GT21x's (where nouveau previously did),
and after some effort I was unable to get it to work.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This is a screen cap because drivers are expected to support it either
for all shader types or for none of them.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Dave Airlie <airlied@redhat.com>
On 32 bits system, application memory is quite limited.
softpipe uses application memory. To help prevent memory
exhaustion, limit reported memory availability to 2GB.
Some gallium nine apps do check reported memory by allocating
resources until memory is full. Gallium nine refuses allocations
when 80% of the reported memory limit is used. This change
helps some apps to start.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Some hardware can't render to color/depth buffers of mixed bitness. When
that happens a fallback has to happen, but this allows the driver to
express that this isn't an optimal scenario. The purpose of this is to
remove such fbconfigs from the GLX/EGL config list.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows Gallium drivers to advertise the subpixel precision
for floating point viewports bounds.
v2:
- Set ViewportSubpixelBits in st_init_limits.
Signed-off-by: Józef Kucia <joseph.kucia@gmail.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
D3D9 has a different behaviour for depth bias.
For OGL/D3D1X, the depth bias unit is the
minimal resolvable value for the depth buffer,
which depends on the format (and has different
behaviour for float depth buffers).
For D3D9, the depth bias unit is 1.0f.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This says how many window rectangles are supported by the
implementation, although it may not exceed PIPE_MAX_WINDOW_RECTANGLES.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>
Mesa and gallium don't have a complete set of matching 3-component
texture formats. For example, 8-bit sRGB unorm. To fully support
the GL_ARB_copy_image extension we need to have support for all of
these formats: RGB8_UNORM, RGB8_SNORM, RGB8_SRGB, RGB8_UINT, and
RGB8_SINT using the same component order. Since we don't have that,
disable the 3-component formats for now.
v2: Simplify 3-component format check, per Marek.
Also check that target != PIPE_BUFFER.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Some hardware supports primitive restart on patch primitives, and other
hardware does not. Modern GL and ES include a query for this feature;
adding a capability bit will allow us to answer it.
As far as I know, AMD hardware does not support this feature, while
NVIDIA and Intel hardware does. However, most Gallium drivers do not
appear to support tessellation shaders yet. So, I've enabled it for
nvc0 and disabled it everywhere else.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This enables ARB_compute_shader on softpipe. I've only
tested this with piglit so far, and I hopefully plan
on integrating it with my vulkan work. I'll get to
testing it with deqp more later.
The basic premise is to create up to 1024 restartable
TGSI machines, and execute workgroups of those machines.
v1.1: free machines.
v2: deqp fixes - add samplers support, finish
atomic operations, fix load/store writemasks.
Acked-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This adds support for the features requires for ARB_shader_storage_buffer_object
and ARB_shader_atomic_counters, ARB_shader_atomic_counter_ops.
[airlied: some cleanups applied]
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Add PIPE_CAP to determine if the GL extension
'GL_ARB_framebuffer_no_attachments' shall be
supported.
The driver is required to support 'PIPE_FORMAT_NONE'
via its 'is_format_supported()' callback in order
to determine the MSAA modes the hardware supports so
that values requested from the application using
'GL_ARB_framebuffer_no_attachments' may be quantized
to what the hardware expects.
V.2:
Fix doc for a more detailed description of the PIPE_CAP
and the corresponding GL constant.
V.3:
Renamed and repurposed once again.
V.4:
Remove CAP from cap_mapping array.
[airlied: fix damaged whitespace]
Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
If you're worried about the duplication of some CAPs, we can remove them
later.
v2: add fields for memory eviction stats
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
This cap indicates whether pipe->create_surface can reinterpret a texture
as a surface with a format of different block width/height (but equal
block size).
v2: fix whitespace
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
This cap indicates that the driver only supports R, RG, RGB and RGBA
formats for PIPE_BUFFER sampler views.
v2: move into "unsupported features" section for nouveau (Ilia Mirkin)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Since the GREMEDY extensions are normally only exposed by the gremedy
debugger (and could possibly trigger debug paths in the app), we don't
expose the extension by default, but instead only with
ST_DEBUG=gremedy.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This patch adds a new interface to support hardware mipmap generation.
PIPE_CAP_GENERATE_MIPMAP is added to allow a driver to specify
if this new interface is supported; if not supported, the state tracker will
fallback to mipmap generation by rendering/texturing.
v2: add PIPE_CAP_GENERATE_MIPMAP to the disabled section for all drivers
v3: add format to the generate_mipmap interface to allow mipmap generation
using a format other than the resource format
v4: fix return type of trace_context_generate_mipmap()
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
It makes sense to re-use pipe->invalidate_resource for the purpose of
glInvalidateBufferData, but this function is already implemented in vc4
where it doesn't have the expected behavior. So add a capability flag
to indicate that the driver supports the expected behavior.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
This allows the state tracker to know that the various draw parameters
are available in vertex shaders.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
3333977556 added support for ASTC textures to
gallium. They don't have any helpers hooked up for software decoding, however,
so cannot support them in drivers relying on util code for decoding.
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Required by ARB_sample_shading for drivers that don't want a shader variant
in st/mesa.
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Roland Scheidegger <sroland@vmware.com>
Passes the shader piglit tests and introduces no regressions.
This commit finally makes use of the refactoring in previous
commits.
v2:
- adapted the code to changes in previous commits (renames,
need_cube_convert stuff)
- splitted too long lines
Reviewed-by: Brian Paul <brianp@vmware.com>
