Add helpers to get the number of src/dest components for an intrinsic,
and update spots that were open-coding this logic to use the helpers
instead.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Not used in GL but 8 and 16 component vectors exist in OpenCL.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
nir_validate.c's #endif already had the correct NDEBUG comment
Fixes: dcb1acdea0 "nir/validate: Only build in debug mode"
Fixes: 9ff71b649b "i965/nir: Validate that NIR passes call nir_metadata_preserve()"
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
We were already validating that the parent type goes along with the
child type but we weren't actually validating that the parent type is
reasonable. This fixes that.
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
The original bit-size validation wasn't capable of properly dealing with
instructions with variable bit sizes. An attempt was made to handle it
by looking at source and destinations but, because the validation was
done in validate_alu_(src|dest), it didn't really have the needed
information. The new validation code is much more straightforward and
should be more correct.
Reviewed-by: Eric Anholt <eric@anholt.net>
We've always required bit sizes to match but the rules for number of
components have been a bit loose. You've never been allowed to source
from something with less components than you consume, but more has
always been fine. This changes the validator to require that they match
exactly. The fact that they don't always match has been a source of
confusion in NIR for quite some time and it's time we got rid of it.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Certain built-in arrays, such as gl_ClipDistance[], gl_CullDistance[],
gl_TessLevelInner[], and gl_TessLevelOuter[] are specified as scalar
arrays. Normal scalar arrays are sparse - each array element usually
occupies a whole vec4 slot. However, most hardware assumes these
built-in arrays are tightly packed.
The new var->data.compact flag indicates that a scalar array should
be tightly packed, so a float[4] array would take up a single vec4
slot, and a float[8] array would take up two slots.
They are still arrays, not vec4s, however. nir_lower_io will generate
intrinsics using ARB_enhanced_layouts style component qualifiers.
v2: Add nir_validate code to enforce type restrictions.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
One of NIR's invariants is that control flow lists always start and end
with blocks. There's no good reason why we should return a cf_node from
these functions since we know that it's always a block. Making it a block
lets us remove a bunch of code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
Without this the following line will segfault and we don't get to
see the results of the validate_assert() above.
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
It defaults to true so default behavior doesn't change but it allows you to
do NIR_VALIDATE=false if you don't want validation. Disabling validation
can substantially speed up shader compiles so you frequently want to turn
it off if compiler invariants aren't in question.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Rob Clark <robclark@freedesktop.org>
With the introduction of fp64 and fp16 to nir, there are now a bunch of
float types running around. A F1 2015 shader ends up with an i2f.sat
operation, which has a nir_type_float32 destination. Allow sat on all
the float destination types.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
At this point, it would require a logic error in nir_validate to not
have already populated this hashtable entry, but coverity doesn't
realize that:
CID 1265547 (#1 of 1): Dereference null return value (NULL_RETURNS)3.
dereference: Dereferencing a null pointer entry.
CID 1271039 (#1 of 1): Dereference null return value (NULL_RETURNS)3.
dereference: Dereferencing a null pointer entry.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Log all the errors, and at the end dump the shader w/ error annotations
to make it easier to see where the problems are.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_def(\([^,]*\),\s*\([^,]*\))/nir_foreach_def(\2, \1)/
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_use(\([^,]*\),\s*\([^,]*\))/nir_foreach_use(\2, \1)/
and similar expressions for nir_foreach_use_safe, etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_phi_src(\([^,]*\),\s*\([^,]*\))/nir_foreach_phi_src(\2, \1)/
and a similar expression for nir_foreach_phi_src_safe.
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
This matches the "foreach x in container" pattern found in many other
programming languages. Generated by the following regular expression:
s/nir_foreach_instr(\([^,]*\),\s*\([^,]*\))/nir_foreach_instr(\2, \1)/
and similar expressions for nir_foreach_instr_safe etc.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
There are several passes where we need to specify some set of variable
modes that the pass needs top operate on. This lets us easily do that.
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
This really hacky commit adds a bit size to registers and SSA values. It
also adds rules in the validator to validate that they do the right things.
It's still an open question as to whether or not we want a bit_size in
nir_alu_instr or if we just want to let it inherit from the destination.
I'm inclined to just let it inherit from the destination. A similar
question needs to be asked about intrinsics.
v2 (Connor):
- Relax validation: comparisons have explicit destination sizes
and implicit source sizes.
v3 (Sam):
- Use helpers to get size and base types of nir_alu_type enum.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Previously we were receiving shared variable accesses via a lowered
intrinsic function from glsl. This change allows us to send in
variables instead. For example, when converting from SPIR-V.
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
This commit adds the capability to NIR to support separate textures and
samplers. As it currently stands, glsl_to_nir only sets the texture deref
and leaves the sampler deref alone as it did before and nir_lower_samplers
assumes this. Backends can still assume that they are combined and only
look at only at the texture index. Or, if they wish, they can assume that
they are separate because nir_lower_samplers, tgsi_to_nir, and prog_to_nir
all set both texture and sampler index whenever a sampler is required (the
two indices are the same in this case).
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to separate the two concepts. When we do, the sampler will
become optional. Doing a rename first makes the separation a bit more
safe because drivers that depend on GLSL or TGSI behaviour will be fine to
just use the texture index all the time.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
