The new hardware actually supports this OpenGL 1.x feature natively,
so we can finally drop our shader workarounds.
Not many applications use GL_CLAMP, and most use it unintentionally, but
it's trivial to do right, so we should.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
When dereferencing an element of gl_SampleMaskIn[], the source register
here will be a HW_REG rather than a VGRF because the payload slot is
now exposed directly.
Fixes an assertion failure in the Piglit test:
tests/spec/arb_gpu_shader5/execution/samplemaskin-basic
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
At least on MSVC we statically link against the CRT, so we must disable
the CRT message boxes if we want unattended testing.
The messages are convenient when running manually, so let them be if the
system error message boxes are not disabled.
The ARB_gpu_shader5 spec says:
"To determine whether the conversion for a single argument in one match is
better than that for another match, the following rules are applied, in
order:
1. An exact match is better than a match involving any implicit
conversion.
2. A match involving an implicit conversion from float to double is
better than a match involving any other implicit conversion.
3. A match involving an implicit conversion from either int or uint to
float is better than a match involving an implicit conversion from
either int or uint to double.
If none of the rules above apply to a particular pair of conversions,
neither conversion is considered better than the other."
V3: Add spec citation, including oddball difference between gs5 and GLSL
4.0; comment a bit better as per Jordan's suggestions.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This will facilitate GLSL 4.0 / ARB_gpu_shader5's enhanced overload
resolution rules, and also possibly better error reporting for ambiguous
function calls.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
V2: Fix crashes during linking, where the parse state is NULL. In this
case, all required checks have already been done, so we assume the
extension is enabled.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The available implicit conversions depend on the GLSL version we're
compiling.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We're about to add new implicit conversions, first for ARB_gpu_shader5,
and then later for ARB_gpu_shader_fp64. Pull out the opcode
determination into its own function, and get rid of the bool -> float
case that could never be hit anyway [since it fails the is_numeric()
check].
V2: Retain the vector width mangling. It turns out this is necessary for
the conversions done (and then thrown away) when determining the return
type of arithmetic operators.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This works like glsl-1.20+'s invariant redeclarations, but with fewer
restrictions, since `precise` is allowed on pretty much anything.
Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
There are several common ways to check whether an object is a particular
subclass: dynamic_cast<>, the as_subclass() pattern, or explicit enum
tags. We originally used the virtual as_subclass methods, but later
added enum tags as they are much nicer for debugging.
Since we have the enum tags, we don't necessarily need to use virtual
functions to implement the as_subclass() methods. We can just check the
tag and return the pointer or NULL.
This saves 18 entries in the vtable, and instead of two pointer
dereferences per as_subclass() call most are only three inline
instructions.
Compile time of sam3/112.frag (the longest compile in a recent shader-db
run) is reduced by 5% from 348 to 329 ms (n=500).
perf stat of this workload shows:
24.14% reduction in iTLB-loads: 285,543 -> 216,606
42.55% reduction in iTLB-load-misses: 18,785 -> 10,792
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Now that the constructors set a type, ir_type_unset is not very useful.
Move it to the end of the enum (specifically out of position 0) so that
enums checks for dereferences and rvalues can save an instruction.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Makes checking whether an object is an ir_dereference, an ir_rvalue, or
an ir_jump simpler. Since ir_dereference is a subclass or ir_rvalue,
list its subtypes first so that they can both generate nice code.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
This has the added perk that if you forget to set ir_type in the
constructor of a new subclass (or a new constructor of an existing
subclass) the compiler will tell you... instead of relying on
ir_validate or similar run-time detection.
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
We have customers using NULL as a way to test the robustness of the API.
Without this check, EGL will segfault trying to dereference
dri2_surf->wl_win->private because wl_win is NULL.
This fix adds a check and sets EGL_BAD_NATIVE_WINDOW
v2: Incorporated feedback from idr - moved the check to a higher level
function.
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
For some reason, CP DMA doesn't follow the predicate bit if I enable it,
so this is the only option.
This fixes piglit: spec/NV_conditional_render/clear
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Same as b026b6bbfe3f15c8a7296ac107dc3d31f74e401e, but
COLOR_ARRAY_SIZE/SECONDARY_COLOR_ARRAY_SIZE.
Ideally we wouldn't munge the incoming state, so that we wouldn't need
to unmunge it back on glGet*. But the array size state is copied and
referred in many places, many of which couldn't take an GLenum like
GL_BGRA instead of a plain integer. So just hack around on glGet*,
to ensure there is no risk of introducing regressions elsewhere.
This bug causes problems to Apitrace, resulting in wrong traces. See
https://github.com/apitrace/apitrace/issues/261 for details.
Tested with piglit arb_vertex_array_bgra-get, which was created for this
purpose.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
These were missed in commit e374809819.
Fixes 'make check'.
CC test_eu_compact.o
test_eu_compact.c: In function ‘gen_f0_0_MOV_GRF_GRF’:
test_eu_compact.c:222:4: error: implicit declaration of function ‘brw_set_predicate_control’ [-Werror=implicit-function-declaration]
brw_set_predicate_control(p, true);
^
test_eu_compact.c: In function ‘run_tests’:
test_eu_compact.c:270:6: error: implicit declaration of function ‘brw_set_access_mode’ [-Werror=implicit-function-declaration]
brw_set_access_mode(p, BRW_ALIGN_16);
^
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Eventually we're going to use functions to set bits on an instruction.
Putting 'default' in the name of functions that alter default state will
help distinguins them.
This patch was generated entirely mechanically, by the following:
for file in brw*.{cpp,c,h}; do
sed -i \
-e 's/brw_set_mask_control/brw_set_default_mask_control/g' \
-e 's/brw_set_saturate/brw_set_default_saturate/g' \
-e 's/brw_set_access_mode/brw_set_default_access_mode/g' \
-e 's/brw_set_compression_control/brw_set_default_compression_control/g' \
-e 's/brw_set_predicate_control/brw_set_default_predicate_control/g' \
-e 's/brw_set_predicate_inverse/brw_set_default_predicate_inverse/g' \
-e 's/brw_set_flag_reg/brw_set_default_flag_reg/g' \
-e 's/brw_set_acc_write_control/brw_set_default_acc_write_control/g' \
$file;
done
No manual changes were done after running that command.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
