Prevent the piglit test,
amd_vertex_shader_layer-layered-depth-texture-render, from regressing in
in a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Prepare this function to be used in iris and to handle new Gen12 behavior.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add a helper to determine if an ISL surface supports the write-through
mode of HIZ_CCS.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The HIZ_CCS and MCS_CCS auxiliary surface modes require that drivers
store information about two aux buffers. We choose to represent this as
HiZ/MCS being the primary aux surface and the CCS as an secondary/extra
aux surface. This representation has the effect of placing most of the
code that will have to choose between the two aux surfaces around the
aux-map entry points.
Reviewed-by: Sagar Ghuge <sagar.ghuge@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of guessing an aux_usage, then confirming it if the
isl_surf_get_*_surf functions are successful, just call the ISL
functions up-front. This will help us to more easily determine if a
depth buffer supports HIZ_CCS.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Add an extra aux parameter which will be filled out with CCS if the
first two isl_surf parameters fit the requirements for HiZ_CCS.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
While this format isn't listed in BSpec: 53911, other documentation and
empirical evidence suggest that it's fine to remap it to R32_FLOAT. I've
filed a bug for the BSpec page.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
We'll start doing slow depth clears more often on HIZ_CCS buffers in a
future commit. Reduce the performance impact by making them use less
bandwidth.
From the Depth Test section of the BSpec:
This function is enabled by the Depth Test Enable state variable. If
enabled, the pixel's ("source") depth value is first computed. After
computation the pixel's depth value is clamped to the range defined
by Minimum Depth and Maximum Depth in the selected CC_VIEWPORT state.
Then the current ("destination") depth buffer value for this pixel is
read.
and from the Depth Buffer Updates section of the BSpec:
If depth testing is disabled or the depth test passed, the incoming
pixel's depth value is written to the Depth Buffer.
Taken together, it's clear that depth testing isn't necessary to perform
a depth buffer clear. Mark Janes and I analyzed this patch with
frameretrace and a depthrange piglit test. I disabled HiZ to ensure we'd
get slow depth clears. We've observed the bandwidth consumption by the
depth buffer access to be cut ~50% on BDW and SKL during depth clears.
On a more graphically intensive workload, the Shadowmapping Sascha
benchmark, I took the average of 3 runs on a BDW with a display
resolution of about 1920x1200 (minus some desktop environment
decorations). I measured a 22.61% FPS improvement when HiZ is disabled.
v2. The BSpec doesn't mandate this behavior, update comment accordingly.
(Ken)
Fixes: bc4bb5a7e3 ("intel/blorp: Emit more complete DEPTH_STENCIL state")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In ISL:
Update the format table to add CCS_E support for some 8BPP formats,
some 16BPP formats, and R10G10B10A2_UNORM_SRGB.
In the helper for determining CCS_E support, we return false for some
16BPP formats because they aren't properly handled in blorp_copy().
In BLORP:
Allow the new and non-problematic formats for CCS_E-enabled copies.
v2. Update other fields for A1B5G5R5_UNORM and A4B4G4R4_UNORM in table.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
The CCS could be described in a number of ways, but this format was
chosen to minimize churn in the drivers. We may decide on an different
direction in the future.
v2. Increase alignment for display surfaces. (Nanley)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com> (v1)
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Use a helper that will automatically handle Gen12's CCS tiling when
creating a CCS isl_surf.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
In the function which translates ISL tilings to i915 tilings, map ISL's
HiZ and CCS tilings to Y instead of NONE (linear). The HW docs describe
HiZ and pre-Gen12 CCS surfaces as being Y-tiled in memory.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Avoid the compiler warnings for the new enums that will be introduced in
a future commit.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
The isl_surf structs for Gen12's CCS won't describe how many slices in
the main surface can be compressed. All slices will be compressable if
CCS is enabled, so lookup the main surface's logical dimension.
v2. Add a space before a `?`. (Jordan)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
This isn't accurate enough for HiZ which can have a discontiguous range
of supported aux slices. This also won't work with the plan to represent
Gen12 CCS as a single slice surface.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
From "Render Target Fast Clear" description for Gen12:
"SW must store clear color using MI_STORE_DATA_IMM with
ForceWriteCompletionCheck bit set."
From Instruction_MI_STORE_DATA_IMM, bitfield 10 (when set to 1):
"Following the last write from this command, Command Streamer
will wait for all previous writes are completed and in global
observable domain before moving to next command."
We use 4 SDIs to store the clear color (one per channel). From the
description, it looks to me that setting that flag only on the last SDI
should be enough.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Gen12's CCS requires that the main surface have a pitch aligned to 512B.
v2. Provide a BSpec citation. (Ken)
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
add_aux_state_tracking_buffer() actually checks the aux usage when
determining how many dwords to allocate for state tracking. Move the
function call to the point after the CCS_E aux usage is assigned.
Fixes: de3be61801 ("anv/cmd_buffer: Rework aux tracking")
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Avoid failing the `info->use_clear_address` assertion in ISL on Gen12+.
Fixes: 6c9f9a82d7 ("intel/genxml,isl: Add gen12 render surface state changes")
Reported-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In gen12 we use the 3DSTATE_DEPTH_BOUNDS instruction
to enable depth bounds testing.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In gen12 we use the 3DSTATE_DEPTH_BOUNDS instruction
to enable depth bounds testing.
Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
In gen12 we add the 3DSTATE_DEPTH_BOUNDS instruction
which enables support for depth bounds testing.
Signed-off-by: Plamena Manolova <plamena.manolova@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
