To make PIPE_FORMATs usable from non-gallium parts of Mesa, I want to
move their helpers out of gallium. Since u_format used
util_copy_rect(), I moved that in there, too.
I've put it in a separate directory in util/ because it's a big chunk
of related code, and it's not clear to me whether we might want it as
a separate library from libmesa_util at some point.
Closes: #1905
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
pipe_mutex_unlock() was made unnecessary with fd33a6bcd7.
Replaced using:
find ./src -type f -exec sed -i -- \
's:pipe_mutex_unlock(\([^)]*\)):mtx_unlock(\&\1):g' {} \;
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
replace pipe_mutex_lock() was made unnecessary with fd33a6bcd7.
Replaced using:
find ./src -type f -exec sed -i -- \
's:pipe_mutex_lock(\([^)]*\)):mtx_lock(\&\1):g' {} \;
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
util_color often merely represents a collection of bytes, however it is
inconvenient if those bytes can only be accessed as floats/doubles for int
formats exceeding 32bits.
(Note that since rgba8 formats use one uint, not 4 bytes, hence the byte and
short member were left as is.)
Required for glClearBuffer, which only clears one colorbuffer attachment.
Example:
If the first colorbuffer is float and the second one is int:
pipe->clear(pipe, PIPE_CLEAR_COLOR0, float_clear_color, ...);
pipe->clear(pipe, PIPE_CLEAR_COLOR1, int_clear_color, ...);
This doesn't need any driver changes yet, because all drivers just use:
if (flags & PIPE_CLEAR_COLOR) ..
The drivers which support GL 3.0 will have to implement it properly though.
All bound layers (from first_layer to last_layer) should be cleared.
This uses a vertex shader which outputs gl_Layer = gl_InstanceID, so each
instance goes to a different layer. By rendering a quad and setting
the instance count to the number of layers, it will trivially clear all
layers.
This requires AMD_vertex_shader_layer (or PIPE_CAP_TGSI_VS_LAYER), which only
radeonsi supports at the moment. r600 could do this too. Standard DX11
hardware will have to use a geometry shader though, which has higher overhead.
r600g needs explicit flushing before DRI2 buffers are presented on the screen.
v2: add (stub) implementations for all drivers, fix frontbuffer flushing
v3: fix galahad
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
There isn't any difference between 32_FLOAT and 32_*INT in vertex fetching.
Both of them don't do any format conversion.
Reviewed-by: Brian Paul <brianp@vmware.com>
These are optimizations which make MSAA a lot faster.
The MSAA work is complete with this commit. (except for enablement of AA
optimizations for RGBA16F, for which a patch is ready and waiting until
the kernel CS checker fix lands)
MSAA can't be made any faster as far as hw programming is concerned.
The catch is only one process and one colorbuffer can use the optimizations
at a time. There usually is only one MSAA colorbuffer, so it shouldn't be
an issue.
Also, there is a limit on the size of MSAA colorbuffer resolution in terms
of megapixels. If the limit is surpassed, the AA optimizations are disabled.
The limit is:
- 1 Mpix on low-end and some mid-level chipsets (1024x768 and 1280x720)
- 2 Mpix on some mid-level chipsets (1600x1200 and 1920x1080)
- 3 or 4 Mpix on high-end chipsets (2048x1536 or 2560x1600, respectively)
It corresponds to the number of raster pipes (= GB pipes) available, each pipe
can hold 1 Mpix of AA compression data.
If it's enabled, the driver prints to stdout:
radeon: Acquired access to AA optimizations.
RB3D_DEBUG_CTL doesn't help, so I resolve to a tiled temporary texture and
then blitting it to the destination one, which we also do in other situations.
This is not as optimized as r600g - the MSAA compression is missing,
so r300g needs a lot of bandwidth (more than r600g to do the same thing).
However, if the bandwidth is not an issue for you, you can enjoy this
unoptimized MSAA support.
The only other missing optimization for MSAA is the fast color clear.
MSAA is enabled on r500 only, because that's the only GPU family I tested.
That said, MSAA should work on r300 and r400 as well (but you must set
RADEON_MSAA=1 to allow it, then turn MSAA on in your app or set GALLIUM_MSAA=n,
n >= 2, n <= 6)
I will enable the support by default on r300-r400 once someone (other than me)
tests those chipsets with piglit.
The supported modes are 2x, 4x, 6x.
The supported MSAA formats are RGBA8, BGRA8, and RGBA16F (r500 only).
Those 3 formats are used for all GL internal formats.
Tested with piglit. (I have ported all MSAA tests to GL2.1)
I fixed the only known bugs on r500 with 0222b2bd41.
Now there are no piglit regressions with Hyper-Z and all apps I tested seem
to work.
To summarize how it works:
- Only one process can use it at a time. This is a hardware limitation.
- The first process to clear a zbuffer gets the exclusive access to use
Hyper-Z.
- Compositors don't use any zbuffer, so they won't steal it, but some web
browsers do, so make sure there's no web browser running if you want your
game to use Hyper-Z.
- There's no need to restart an app which couldn't get the access to Hyper-Z.
Just quit the app which took it, the driver can turn it on for the other app
in the middle of rendering.
- If an app gets the access to Hyper-Z, it prints "radeon: Acquired Hyper-Z"
to stdout.
r300-r400:
Hyper-Z will be enabled by default on r300-r400 once sufficient testing is
done with piglit and Lightsmark at least.
Be sure to set the env var RADEON_HYPERZ and run piglit with parameters: -c 0
This allows updating only a subrange of buffer bindings.
set_vertex_buffers(pipe, start_slot, count, NULL) unbinds buffers in that
range. Binding NULL resources unbinds buffers too (both buffer and user_buffer
must be NULL).
The meta ops are adapted to only save, change, and restore the single slot
they use. The cso_context can save and restore only one vertex buffer slot.
The clients can query which one it is using cso_get_aux_vertex_buffer_slot.
It's currently set to 0. (the Draw module breaks if it's set to non-zero)
It should decrease the CPU overhead when using a lot of meta ops, but
the drivers must be able to treat each vertex buffer slot as a separate
state (only r600g does so at the moment).
I can imagine this also being useful for optimizing some OpenGL use cases.
Reviewed-by: Brian Paul <brianp@vmware.com>
The original blit function is extended and the otAher functions reuse it.
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
This couldn't be split because it would break bisecting.
Summary:
* r300g,r600g: stop using u_vbuf
* r300g,r600g: also report that the FIXED vertex type is unsupported
* u_vbuf: refactor for use in the state tracker
* cso: wire up u_vbuf with cso_context
* st/mesa: conditionally install u_vbuf
Conflicts:
src/gallium/auxiliary/tgsi/tgsi_strings.c
src/mesa/state_tracker/st_atom_clip.c
commit d919791f2742e913173d6b335128e7d4c63c0840
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 17:59:22 2012 +0100
d3d1x: adapt to new clip state
commit cfec82bca3fefcdefafca3f4555285ec1d1ae421
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 14:16:51 2012 +0100
gallium/docs: update for clip state changes
commit c02bfeb81ad9f62041a2285ea6373bbbd602912a
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 14:21:43 2012 +0100
tgsi: add TGSI_PROPERTY_PROHIBIT_UCPS
commit d4e0a785a6a23ad2f6819fd72e236acb9750028d
Author: Brian Paul <brianp@vmware.com>
Date: Thu Jan 5 08:30:00 2012 -0700
tgsi: consolidate TGSI string arrays in new tgsi_strings.h
There was some duplication between the tgsi_dump.c and tgsi_text.c
files. Also use some static assertions to help catch errors when
adding new TGSI values.
v2: put strings in tgsi_strings.c file instead of the .h file.
Reviewed-by: Dave Airlie <airlied@redhat.com>
commit c28584ce0d8c62bd92c8f140729d344f88a0b3cd
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Fri Jan 6 12:48:09 2012 +0100
gallium: extend user_clip_plane_enable to apply to clip distances
commit f1d5016c07f786229ed057effbe55fbfd160b019
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Jan 6 02:39:09 2012 +0100
nvfx: adapt to new clip state
commit 6f6fa1c26bd19f797c1996731708e3569c9bfe24
Author: Marek Olšák <maraeo@gmail.com>
Date: Fri Jan 6 01:41:39 2012 +0100
st/mesa: fix DrawPixels with GL_DEPTH_CLAMP
commit c86ad730aa1c017788ae88a55f54071bf222be12
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Tue Jan 3 23:51:30 2012 +0100
nv50: adapt to new clip state
commit 3a8ae6ac243bae5970729dc4057fe02d992543dc
Author: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Date: Tue Jan 3 23:32:36 2012 +0100
nvc0: adapt to new clip state
commit 6243a8246997f8d2fcc69ab741a2c2dea080ff11
Author: Marek Olšák <maraeo@gmail.com>
Date: Thu Dec 29 01:32:51 2011 +0100
draw: initalize pt.user.planes in draw_init
This fixes a crash in glean/fpexceptions.
commit e3056524b19b56d473f4faff84ffa0eb41497408
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Dec 26 06:26:55 2011 +0100
svga: adapt to new clip state
commit c5bfa8b37d6d489271df457229081d6bbb51b4b7
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 14:11:51 2011 +0100
r600g: adapt to new clip state
commit f11890905362f62627c4a28a8255b76eb7de7df2
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 14:10:26 2011 +0100
r300g: adapt to new clip state
commit e37465327c79a01112f15f6278d9accc5bf3103f
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 12:39:16 2011 +0100
draw: adapt to new clip state
This adds a regression in the LLVM clipping path. Can anybody see anything
wrong with the code? It works for every other case, just glean/fpexceptions
crashes when doing the "Infinite clip plane test".
commit b474d2b18c72d965eefae4e427c269cba5ce6ba2
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 13:14:59 2011 +0100
u_blitter: don't save/set/restore clip state
commit 9dd240ea91f523a677af45e8d0adb9e661e28602
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 13:11:56 2011 +0100
gallium: don't cso_save/set/restore clip state
The enable bits are in the rasterizer state.
commit a4f7031179f5f4ad524b34b394214b984ac950f6
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 12:58:55 2011 +0100
gallium: default depth_clip to 1
depth_clip = !depth_clamp
commit fe21147a00ab90e549d63fe12ee4625c9c2ffcc3
Author: Marek Olšák <maraeo@gmail.com>
Date: Mon Dec 26 06:14:19 2011 +0100
trace,util: update state logging to new clip state
Also dump the other missing flags.
commit 2a3b96e84ac872dcc5bc1de049fe76bb58d64b23
Author: Marek Olšák <maraeo@gmail.com>
Date: Sun Dec 25 10:43:43 2011 +0100
st/mesa: adapt to new clip state
commit b7b656a42fca19d7c85267f42649a206a85a2c72
Author: Marek Olšák <maraeo@gmail.com>
Date: Sat Dec 17 15:45:19 2011 +0100
gallium: move state enable bits from clip_state to rasterizer_state
Changing pipe_resource was wrong, because it can be used by other contexts
at the same time. This fixes the last possible race condition in r300g
that I know of.
This also fixes blitting NPOT compressed textures. Random pixels sometimes
appeared at the right-hand edge of the texture.
Finally, this removes r300_texture_desc::stride_in_pixels. It makes little
sense with sampler views and surfaces being able to override width0, height0,
and the format entirely.
