This will be used by the on disk shader cache.
v2:
* Set in brw_compile_* rather than brw_codegen_*. (Jason)
Signed-off-by: Timothy Arceri <timothy.arceri@collabora.com>
[jordan.l.justen@intel.com: Only add to brw_stage_prog_data]
Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
NIR does not have these instructions. TGSI and Mesa IR both implement
them using < and >=, repsectively. Removing them deletes a bunch of
code and means I don't have to add code to the SPIR-V generator for
them.
v2: Rebase on 2+ years of change... and fix a major bug added in the
rebase.
text data bss dec hex filename
8255291 268856 294072 8818219 868e2b 32-bit i965_dri.so before
8254235 268856 294072 8817163 868a0b 32-bit i965_dri.so after
7815339 345592 420592 8581523 82f193 64-bit i965_dri.so before
7813995 345560 420592 8580147 82ec33 64-bit i965_dri.so after
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Patch uses mem_ctx for allocation to ensure param array gets freed
later.
==6164== 48 bytes in 1 blocks are definitely lost in loss record 61 of 193
==6164== at 0x4C2EB6B: malloc (vg_replace_malloc.c:299)
==6164== by 0x12E31C6C: ralloc_size (ralloc.c:121)
==6164== by 0x130189F1: fs_visitor::assign_constant_locations() (brw_fs.cpp:2095)
==6164== by 0x13022D32: fs_visitor::optimize() (brw_fs.cpp:5715)
==6164== by 0x13024D5A: fs_visitor::run_fs(bool, bool) (brw_fs.cpp:6229)
==6164== by 0x1302549A: brw_compile_fs (brw_fs.cpp:6570)
==6164== by 0x130C4B07: blorp_compile_fs (blorp.c:194)
==6164== by 0x130D384B: blorp_params_get_clear_kernel (blorp_clear.c:79)
==6164== by 0x130D3C56: blorp_fast_clear (blorp_clear.c:332)
==6164== by 0x12EFA439: do_single_blorp_clear (brw_blorp.c:1261)
==6164== by 0x12EFC4AF: brw_blorp_clear_color (brw_blorp.c:1326)
==6164== by 0x12EFF72B: brw_clear (brw_clear.c:297)
Fixes: 8d90e28839 ("intel/compiler: Allocate pull_param in assign_constant_locations")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Fixes intermittent GPU hangs on Broxton with an Intel internal
test case.
There are plenty of similar fragment shaders in piglit that do
not use any varyings and any uniforms. According to the
documentation special timing is needed between pipeline stages.
Apparently we just don't hit that with piglit. Even with the
failing test case one doesn't always get the hang.
Moreover, according to the error states the hang happens
significantly later than the execution of the problematic shader.
There are multiple render cycles (primitive submissions) in between.
I've also seen error states where the ACTHD points outside the
batch. Almost as if the hardware writes somewhere that gets used
later on. That would also explain why piglit doesn't suffer from
this - most tests kick off one render cycle and any corruption
is left unseen.
v2 (Ken): Instead of enabling push constants, enable one of the
inputs (PSIZ).
v3 (Ken, Jason): Use LAYER instead making vulkan emit_3dstate_sbe()
happy.
Cc: "17.3 17.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
The PRM says "The execution size must be 1." In 73137997e2, the
execution size was set to 1 when it should have been BRW_EXECUTE_1
(which maps to 0). Later, in dc2d3a7f5c, JMPI was used for
line AA on gen6 and earlier and we started manually stomping the
exeution size to BRW_EXECUTE_1 in the generator. This commit fixes the
original bug and makes brw_JMPI just do the right thing.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Fixes: 73137997e2
Returns the brw_type for a given ssa.bit_size, and a reference type.
So if bit_size is 64, and the reference type is BRW_REGISTER_TYPE_F,
it returns BRW_REGISTER_TYPE_DF. The same applies if bit_size is 32
and reference type is BRW_REGISTER_TYPE_HF it returns BRW_REGISTER_TYPE_F
v2 (Jason Ekstrand):
- Use better unreachable() messages
- Add Q types
Signed-off-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Signed-off-by: Alejandro Piñeiro <apinheiro@igalia.com
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In order to implement the ballot intrinsic, we do a MOV from flag
register to some GRF. If that GRF is used in a SEL, cmod propagation
helpfully changes it into a MOV from the flag register with a cmod.
This is perfectly valid but when lower_simd_width comes along, it simply
splits into two instructions which both have conditional modifiers.
This is a problem since we're reading the flag register. This commit
makes us check whether or not flags_written() overlaps with the flag
values that we are reading via the instruction source and, if we have
any interference, will force us to emit a copy of the source.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org
gcc is throwing this warning in my meson build:
../src/intel/compiler/brw_eu_validate.c:50:11: warning
argument 1 null where non-null expected [-Wnonnull]
return memmem(haystack.str, haystack.len,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
needle.str, needle.len) != NULL;
~~~~~~~~~~~~~~~~~~~~~~~
The first check for CONTAINS has a NULL error_msg.str and 0 len. The
glibc implementation will exit without looking at any haystack bytes if
haystack.len < needle.len, so this was safe, but silence the warning
anyway by guarding against implementation variablility.
Fixes: 122ef3799d ("i965: Only insert error message if not already present")
Reviewed-by: Matt Turner <mattst88@gmail.com>
Align1 mode offers some nice features over align16, like access to more
data types and the ability to use a 16-bit immediate. This patch does
not start using any new features. It just emits ternary instructions in
align1 mode.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Put hw_ in the name so that it's clear these are the hardware encodings.
Similar to commit 9fb8323328 ("i965: Rename brw_inst's functions that
access the register type")
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
The instruction word contains SubRegNum[4:2] so it's in units of dwords
(hence the * 4 to get it in terms of bytes). Before this patch, the
subreg would have been wrong for DF arguments.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
I'm going to call this from brw_inst.h, and I don't want to have to
include all of brw_reg.h.
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>
Commit a73116ecc6 tried to make add_barrier_deps()
walk to the next barrier, and stop. To accomplish that, it added an
is_barrier flag. Unfortunately, this only works half of the time.
The issue is that add_barrier_deps() walks both backward (to the
previous barrier), and forward (to the next barrier). It also sets
is_barrier. Assuming that we're processing instructions in forward
order, this means that is_barrier will be set for previous instructions,
but not future ones. So we'll never see it, and walk further than we
need to.
dEQP-GLES31.functional.ssbo.layout.random.all_shared_buffer.23
now compiles its shaders in 3.6 seconds instead of 3.3 minutes.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Pallavi G <pallavi.g@intel.com>
This eliminates a layer of wrapping, and makes a backend_instruction
sufficient. The downside is that it exposes 'eot' to the vec4 backend,
which it doesn't need, but can basically happily ignore.
Reviewed-by: Matt Turner <mattst88@gmail.com>
Tested-by: Pallavi G <pallavi.g@intel.com>
This is a lot more natural than special casing it all over the place.
We still have to do a bit of special-casing in assign_constant_locations
but it's not special-cased quite as bad as it was before.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that everything is nicely ralloc'd, we can allocate the pull_param
array in assign_constant_locations instead of higher up. We can also
re-allocate the param array so that it's exactly the needed size. This
should save us some memory because we're not allocating the total needed
param space for both push and pull.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Now that we're always growing the param array as-needed, we can
allocate the param array in common code and stop repeating the
allocation everywere. In order to keep things sane, we ralloc the
[pull_]param array off of the compile context and then steal it back
to a NULL context later. This doesn't get us all the way to where
prog_data::[pull_]param is purely an out parameter of the back-end
compiler but it gets us a lot closer.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of requiring the caller of brw_compile_vs to figure it out, just
grow the param array on-demand.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Instead of making the caller of brw_compile_cs add something to the
param array for thread_local_id_index, just add it on-demand in
brw_nir_intrinsics and grow the array. This is now safe to do because
everyone is now using ralloc for prog_data::param.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's already only ever called from brw_compile_cs and only handles
compute intrinsics. Let's just make it CS-specific. We can always
make it handle other stages again later if we want.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
The Vulkan driver does not support pull constants. It simply limits
things such that we can always push everything. Previously, we were
determining whether or not to push things based on whether or not the
prog_data::pull_param array is non-null. This is rather hackish and
about to stop working.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This burns an extra 10k of memory or so in the case where you don't have
any images. However, if you have several shaders which use images, this
should be much less memory. It also gets rid of a part of prog_data
that really has nothing to do with the compiler.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This moves us away to the array of pointers model and onto a model where
each param is represented by a generic uint32_t handle. We reserve 2^16
of these handles for builtins that get generated by somewhere inside the
compiler and have well-defined meanings. Generic params have handles
whose meanings are defined by the driver.
The primary downside to this new approach is that it moves a little bit
of the work that we would normally do at compile time to draw time. On
my laptop this hurts OglBatch6 by no more than 1% and doesn't seem to
have any measurable affect on OglBatch7. So, while this may come back
to bite us, it doesn't look too bad.
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
ARB_enhanced_layouts allows multiple output variables to share the same
location - and these variables may not have the same sizes. For
example, consider these output variables:
// consume X/Y/Z components of 6 vectors
layout(location = 0) out vec3 a[6];
// consumes W component of the first vector
layout(location = 0, component = 3) out float b;
Looking at the first declaration, we see that VARYING_SLOT_VAR0 needs 24
components worth of space (vec3 padded out to a vec4, 4 * 6 = 24). But
looking at the second declaration, we would think that VARYING_SLOT_VAR0
needs only 4 components of space (a single float padded out to a vec4).
nir_setup_outputs() only considered the space requirements of the first
declaration it happened to see, so if 'float b' came first, it would
underallocate the output register space, causing brw_fs_validator.cpp
to assert fail about inst->dst.offset exceeding the register size.
Fixes Piglit's tests/spec/arb_enhanced_layouts/execution/component-layout/
vs-to-fs-array-interleave-single-location.shader_test.
Thanks to Tim Arceri for finding this bug and writing a test!
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
KHR-GL45.shader_ballot_tests.ShaderBallotBitmasks has a MOV that hits
this validation path. MOVs don't have a src1 file, but calling
brw_inst_src1_type() was tripping on src1.file being BRW_IMMEDIATE_VALUE
and the hw_type being something invalid for immediates.
To work around this, just pretend src1 is src0 if there isn't a src1.
Fixes: 2572c2771d (i965: Validate "Special
Requirements for Handling Double Precision Data Types")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102680
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
When computing the total size of the URB for tessellation evaluation
inputs we were not accounting for this, and instead we were always
assuming that each input would take a single vec4 slot, which could
lead to computing a smaller read size than required. Specifically, this
is a problem when the last input is a dvec3/4 such that its XY components
are stored in the the second half of a payload register (which can happen
if the offset for the input in the URB is not 64-bit aligned because
there are 32-bit inputs mixed in) and the ZW components in the
first half of the next, as in this case we would fail to account for the
extra slot required for the ZW components.
Fixes (requires another fix in CTS currently in review):
KHR-GL45.enhanced_layouts.varying_locations
KHR-GL45.enhanced_layouts.varying_array_locations
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
I did not implement:
CNL's restriction on 64-bit int + align16, because I don't think
we'll ever use this combination regardless of hardware generation.
The restriction on immediate DF -> F conversions, because there's no
reason to ever generate that, and I don't even know how DF -> F
conversions are supposed to work in Align16 since (1) the dst stride
must be 1, but (2) the dst stride would have to be 2 for src and dst
strides to be aligned.
