This is needed due Vulkan because by spec (31.1. Limit Requirements)
the minimum value for the following limits are the following ones:
maxPerStageDescriptorSampledImages 16
maxPerStageDescriptorStorageImages 4
maxPerStageDescriptorInputAttachments 4
And we are using v3d textures for all of them, so current limit would
not be enough for some cases.
Note that as the current comment explains there is not exactly a HW
limit for it, so we could bump to 32 for example, but let's just be
conservative and ask the minimum required.
It is worth to note that we needed to maintain the same value for the
OpenGL case, as it gets a register allocation failure on some GL
cases. We tried to fix that with small changes on the nir scheduler,
but we found that it would require some non-trivial effort to get it
done (that eventually we would need to).
Fixes tests like:
dEQP-VK.binding_model.descriptorset_random.sets16.constant.ubolimitlow.sbolimitlow.imglimitlow.noiub.uab.comp.noia.0
v2: keep the previous limit for Opengl (Eric)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6999>
So it could be used by both the OpenGL and the Vulkan driver.
In addition to the move, some small changes were needed to be made on
the API. For example, the simulator was receiving v3d_screen on
initialization, and that code setted v3d_screen->sim_file. Now it
returns the new sim_file created.
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5666>
Adds PIPE_CAP_PRIMITIVE_RESTART_FIXED_INDEX which is a subset of the
primitive restart cap for when the hardware can only support the fixed
indices specified in GLES.
The switch statements were automatically modified with this command:
find \( \( -name \*.cpp -o -name \*.c \) \! -type l \) \
-exec sed -i -r \
's/^(\s*case\s+PIPE_CAP_PRIMITIVE_RESTART)\s*:.*$/\0\n\1_FIXED_INDEX:/' \
{} \;
v2: Add a note in screen.rst
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Reviewed by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5559>
Fixes all the ARB_texture_query_lod piglit tests, and needed to get
the Vulkan CTS textureQueryLOD passing with the ongoing Vulkan driver.
Note that LOD Query bit flag became only available on V42 of the hw,
but the v3d40_tex is using V41 as reference. In order to avoid setting
up the infrastructure to support both v41 and v42, we manually set the
bit if the device version is the correct one.
We also fix how the ARB_texture_query_lod (so EXT_texture_query_lod)
is exposed. Before this commit it was always exposed (wrongly as it
was not really supported). Now it is exposed for devinfo.ver >= 42.
v2: move _need_sampler helper to nir.h (Eric Anholt)
Reviewed-by: Eric Anholt <eric@anholt.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4677>
V3D can do indirect inputs so we don't need it. Also, the lowering
produces horrible if-ladder code that is particularly bad for geometry
shaders where inputs are always arrays and shader bodies usually have
a loop indexing into them.
This fixes a couple of geometry shader tests in CTS that would fail to
register allocate otherwise.
There are no changes in shader-db.
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
To make PIPE_FORMATs usable from non-gallium parts of Mesa, I want to
move their helpers out of gallium. Since u_format used
util_copy_rect(), I moved that in there, too.
I've put it in a separate directory in util/ because it's a big chunk
of related code, and it's not clear to me whether we might want it as
a separate library from libmesa_util at some point.
Closes: #1905
Acked-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
This will expose GL_EXT_primitive_bounding_box and
GL_OES_primitive_bounding_box after previous commits
expose OpenGL ES 3.1 once Compute Shaders are available.
Reviewed-by: Eric Anholt <eric@anholt.net>
This adapts the v3d driver to the new CL submit ioctl interface that
allows the driver to request a flush of the caches after the render
job has completed. This seems to eliminate the kernel write violation
errors reported during CTS and Piglit excutions, fixing some CTS tests
and GPU resets along the way.
v2:
- Adapt to changes in the kernel side.
- Disable shader storage and shader images if the kernel doesn't
implement cache flushing.
Fixes CTS tests:
KHR-GLES31.core.shader_image_size.basic-nonMS-fs-float
KHR-GLES31.core.shader_image_size.basic-nonMS-fs-int
KHR-GLES31.core.shader_image_size.basic-nonMS-fs-uint
KHR-GLES31.core.shader_image_size.advanced-nonMS-fs-float
KHR-GLES31.core.shader_image_size.advanced-nonMS-fs-int
KHR-GLES31.core.shader_image_size.advanced-nonMS-fs-uint
KHR-GLES31.core.shader_atomic_counters.advanced-usage-many-draw-calls2
KHR-GLES31.core.shader_atomic_counters.advanced-usage-draw-update-draw
KHR-GLES31.core.shader_storage_buffer_object.advanced-unsizedArrayLength-fs-int
KHR-GLES31.core.shader_storage_buffer_object.advanced-unsizedArrayLength-fs-std140-matR
KHR-GLES31.core.shader_storage_buffer_object.advanced-unsizedArrayLength-fs-std140-struct
KHR-GLES31.core.shader_storage_buffer_object.advanced-unsizedArrayLength-fs-std430-matC-pad
KHR-GLES31.core.shader_storage_buffer_object.advanced-unsizedArrayLength-fs-std430-vec
Reviewed-by: Eric Anholt <eric@anholt.net>
Now that the UAPI has landed, add the pipe_context function for
dispatching compute shaders. This is the last major feature for GLES 3.1,
though it's not enabled quite yet.
We have a cap bit for gallium and a GLSL compiler flag to control this.
Just trust what GLSL gives us and stop forcing it. In order for this to
be safe, we have to advertise another cap in some of the gallium
drivers.
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
This is a relatively minimal change to adjust all the gallium interfaces
to use bool instead of boolean. I tried to avoid making unrelated
changes inside of drivers to flip boolean -> bool to reduce the risk of
regressions (the compiler will much more easily allow "dirty" values
inside a char-based boolean than a C99 _Bool).
This has been build-tested on amd64 with:
Gallium drivers: nouveau r300 r600 radeonsi freedreno swrast etnaviv v3d
vc4 i915 svga virgl swr panfrost iris lima kmsro
Gallium st: mesa xa xvmc xvmc vdpau va
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
PIPE_CAP_SM3 has always been an odd one out of all our caps. While most
other caps are fine-grained and single-purpose, this cap encode several
features in one. And since OpenGL cares more about single features, it'd
be nice to get rid of this one.
As it turns, this is now relatively simple. We only really care about
three features using this cap, and those already got their own caps. So
we can remove it, and make sure all current drivers just give the same
response to all of them.
The only place we *really* care about SM3 is in nine, and there we can
instead just re-construct the information based on the finer-grained
caps. This avoids DX9 semantics from needlessly leaking into all of the
drivers, most of who doesn't care a whole lot about DX9 specifically.
Signed-off-by: Erik Faye-Lund <erik.faye-lund@collabora.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
The V3D 4.2 HW has a limit to MSAA texture sizes of 4096. With non-MSAA,
we can go up to 7680 (actually probably 8138, but that hasn't been
validated by the HW team). Exposing 7680 in X11 will allow dual 4k displays.
The _LEVELS assumes that the max is always power of two. For V3D 4.2, we
can support up to 7680 non-power-of-two MSAA textures, which will let X11
support dual 4k displays on newer hardware.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
The CTS fails on
dEQP-GLES31.functional.shaders.opaque_type_indexing.atomic_counter.*vertex
when they are enabled, due to the VS being run for both bin and render. I
think this behavior is expected to be valid, but I can't find text in
atomic counters or SSBO specs saying so (the closed I found was in
shader_image_load_store). Just disable it for now, since the closed
source driver doesn't expose vertex atomic counters/SSBOs either.
We can use the same register spilling infrastructure for our loads/stores
of indirect access of temp variables, instead of doing an if ladder.
Cuts 50% of instructions and max-temps from 2 KSP shaders in shader-db.
Also causes several other KSP shaders with large bodies and large loop
counts to not be force-unrolled.
The change was originally motivated by NOLTIS slightly modifying register
pressure in piglit temp mat4 array read/write tests, triggering register
allocation failures.
While waiting for the CSD UABI to get reviewed, I keep having to rebase
the CS patch. Just land the compiler side for now to keep it from
diverging.
For now this covers just GLES 3.1 compute shaders, not CL kernels.
4.1 and 4.2 both have the same 16k limit, but it I'm seeing GPU hangs in
the CTS at 8k and 16k. 4k at least lets us get one 4k display working.
Cc: mesa-stable@lists.freedesktop.org
We'd end up with the constant offset in the uniform stream anyway, since
they're bigger than small immediates. Avoids the extra uniforms and adds
in the shader in favor of just adding once on the CPU.
shader-db:
total instructions in shared programs: 6496865 -> 6494851 (-0.03%)
total uniforms in shared programs: 2119511 -> 2117243 (-0.11%)
This allows DRI3 to pick between UIF and raster according to whether we're
pageflipping or not and whether the pageflipping display can do UIF,
avoiding copies for the windowed/composited case that previously was
forced to linear.
Improves windowed glmark2 -b build:use-vbo=false performance by 30.7783%
+/- 13.1719% (n=3)
This reduces the runtime of dEQP-GLES3.functional.shaders.precision.* from
11.5s to 3.3s. This brings CTS runs down to 4 hours on one of my target
devices.
Some NVIDIA hardware can accept 128 fragment shader input components,
but only have up to 124 varying-interpolated input components. We add a
new cap to express this cleanly. For most drivers, this will have the
same value as PIPE_SHADER_CAP_MAX_INPUTS for the fragment shader.
Fixes KHR-GL45.limits.max_fragment_input_components
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
[imirkin: rebased, improved docs/commit message]
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: 19.0 <mesa-stable@lists.freedesktop.org>
This is only exposed on V3D 4.1+, because we didn't have the TMU write
operations for images on 3.3 (To do GLES 3.1 there, you have to lower it
to SSBO load/stores, which is a problem to solve later).
This was an arbitrary "we support lots of stuff" value when I started the
driver. However, at 400 we expose OES_gpu_shader5, which claims support
for dynamically indexing samplers, which the driver doesn't do yet.
In trying to enable compute shaders, I found that a bunch of deqp-gles31's
compute stuff wanted to interact with indirect dispatch. This was easy to
do on its own.
