It looks like this was missed when converting opt_constant_folding()
from a hierarchical visitor to an rvalue visitor in 6606fde3.
ir_rvalue_visitor already processes values on the way back up the tree,
so we will have already visited every child node. There's no point in
doing it again.
No change in shader-db.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
The pass ultimately skips over any entries with assignment_count != 1,
so there's no need to do further work once we've determined that there
are multiple assignments.
The constant value could be a large array (i.e. uvec4[327]), at which
point skipping the constant_expression_value() call (and the clone()
call within) can save us piles of memory.
No change in shader-db.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
I've added this to nir_gather_info(), but also to glsl_to_nir() as a
temporary measure, since the i965 GL driver today doesn't use
nir_gather_info() yet.
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
I don't know what the intention was here, but this function returns
void. We can't assert anything about its return value.
Fixes "make check" failures.
v2: Also fix prototype for the function (caught by Jordan).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Drop extra #include which is otherwise unneeded (and makes this header
difficult to include from outside of src/mesa).
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
With algebraic-opt support for lowering div to shift, the driver would
like to be able to run this pass *after* the main opt-loop, and then
conditionally re-run the opt-loop if this pass actually lowered some-
thing.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Intel hardware does a form of multisample compression that involves an
auxilary surface called the MCS. When an MCS is in use, you have to first
sample from the MCS with a special opcode and then pass the result of that
operation into the next sample instrucion. Normally, we just do this
ourselves in the back-end, but we want to expose that functionality to NIR
so that we can use MCS values directly in NIR-based blorp.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This is similar to nir_channel except that it lets you grab more than one
channel by providing a mask.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
There's no reason for having a macro *and* a python generator. We can
easily just do the whole thing in python. This has the advantage that we
are no longer definining ALU# macros which conflict with the ones in
brw_fs_builder.h.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
interpolateAt* can only take input variables or an element of an input
variable array. No structs.
Further, GLSL 4.40 relaxes the requirement to allow swizzles, so enable
that as well.
This fixes the following dEQP tests:
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_sample.negative.interpolate_struct_member
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_centroid.negative.interpolate_struct_member
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_offset.negative.interpolate_struct_member
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
In the case of a constant, it might have been propagated through and
variable_referenced() returns NULL. Error out in that case.
Fixes 3 dEQP tests:
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_sample.negative.interpolate_constant
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_centroid.negative.interpolate_constant
dEQP-GLES31.functional.shaders.multisample_interpolation.interpolate_at_offset.negative.interpolate_constant
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Eduardo Lima Mitev <elima@igalia.com>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
This will come in handy when we want to lower gl_CullDistance into
gl_CullDistanceMESA.
[airlied: drop separate APIs for clip/cull - just use single API
to call both passes.]
v3: reexamine my sanity, this was pretty broken, the new code
creates one copy of gl_ClipDistanceMESA, as the clip distance
varying and lowers everything into that in two passes, one for clips
one for culls.
v4: rework using the passes in clip/cull sizes, instead of the
array sizes.
Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
These cases had the parameter removed:
nir/nir_lower_vec_to_movs.c: In function ‘try_coalesce’:
nir/nir_lower_vec_to_movs.c:124:66: warning: unused parameter ‘shader’ [-Wunused-parameter]
try_coalesce(nir_alu_instr *vec, unsigned start_idx, nir_shader *shader)
^
nir/nir_lower_io.c: In function ‘load_op’:
nir/nir_lower_io.c:147:32: warning: unused parameter ‘state’ [-Wunused-parameter]
load_op(struct lower_io_state *state,
^
These cases had the parameter (void) silenced because the parameter was
necessary for an interface:
nir/glsl_to_nir.cpp:1900:32: warning: unused parameter 'ir' [-Wunused-parameter]
nir_visitor::visit(ir_barrier *ir)
^
nir/nir.c: In function ‘remove_use_cb’:
nir/nir.c:802:35: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_use_cb(nir_src *src, void *state)
^
nir/nir.c: In function ‘remove_def_cb’:
nir/nir.c:811:37: warning: unused parameter ‘state’ [-Wunused-parameter]
remove_def_cb(nir_dest *dest, void *state)
^
Number of total warnings in my build reduced from 2543 to 2538
(reduction of 5).
Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
It's what all the call-sites once, so gets rid of a bunch of inlined
glsl_get_base_type() at the call-sites.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Class "ir_constant" had a bunch of constructors where the pointer member
"array_elements" had not been initialized. This could have lead to unsafe
code if something had tried to write anything to it. This patch fixes
this issue by initializing the pointer to NULL in all the constructors.
This issue was discovered by Coverity.
CID: 401603, 401604, 401605, 401610
Signed-off-by: Jakob Sinclair <sinclair.jakob@openmailbox.org>
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
The i965 driver has its own pass for fusing mul+add combinations that's
much smarter than what nir_opt_algebraic can do so we don't want to get the
nir_opt_algebraic one just because we didn't set lower_ffma.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Going to convert this pass to parameterized lower_io_to_temporaries, and
we want the user to be able to specify whether to lower outputs or
inputs or both. The restriction of running this pass before validate
to avoid output reads no longer applies.
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
A pass to lower complex (struct/array/mat) inputs/outputs to primitive
types. This allows, for example, linking that removes unused components
of a larger type which is not indirectly accessed.
In the near term, it is needed for gallium (mesa/st) support for NIR,
since only used components of a type are assigned VBO slots, and we
otherwise have no way to represent that to the driver backend. But it
should be useful for doing shader linking in NIR.
v2: use glsl_count_attribute_slots() rather than passing a type_size
fxn pointer
Signed-off-by: Rob Clark <robclark@freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Currently, when cross validating global variables, all global variables
seen in the shaders that are part of a program are saved in a table.
When checking a variable this already exist in the table, we check both
are initialized to the same value. If the already saved variable does
not have an initializer, we copy it from the new variable.
Unfortunately this is wrong, as we are modifying something it is
constant. Also, if this modified variable is used in
another program, it will keep the initializer, when it should have none.
Instead of copying the initializer, this commit replaces the old
variable with the new one. So if we see again the same variable with an
initializer, we can compare if both are the same or not.
v2: convert tabs in whitespaces (Kenenth Graunke)
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
This reverts commit 99474dc29b.
-Wpedantic is too verbose, even when applied to just a few includes.
We'll just have to deal with the issues as they come.
Reviewed-by: Brian Paul <brianp@vmware.com>
We want to use interface_type, not vtn_var->type. They're normally
equivalent, but for geometry/tessellation per-vertex interface arrays,
we need to unwrap a level.
Otherwise, we tried to iterate a structure members but instead used
an array length. If the array length was longer than the number of
fields in the structure, we'd crash.
Fixes the CreatePipelineGeometryInputBlockPositive layer validation
test.
v2: Just use glsl_without_array() on the vtn_var type
(requested by Jason Ekstrand).
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisforbes@google.com>
