Halt is like a return for the entire shader or exit() if you prefer to
think of it that way. Once an invocation hits a halt, it's 100% dead.
Any writes to output variables which happened before the halt do,
however, still apply.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7356>
If we were desperate to reduce bits, we could probably also use
shader_in/out for hit attributes as they really are an output from
intersection shaders and read-only in any-hit and closest-hit shaders.
However, other passes such as nir_gether_info like to assume that
anything with nir_var_shader_in/out is indexed using vec4 locations for
interface matching. It's easier to just add a new variable mode.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6479>
These are a bit more tricky than most because they're matrix system
values. We make the intentional choice here to not bother with allowing
indirect addressing of columns for these. Since they're system values,
they may be magically constructed somehow or come from weird hardware so
it's easier on back-ends to just handle any indirects with bcsel.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6479>
This new intrinsic is capable of handling the full range of conversions
from OpenCL including rounding modes and possible saturation. The
intention is that we'll emit this intrinsic directly from spirv_to_nir
and then lower it to ALU ops later.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
We're about to introduce conversion ops which are going to want two
different types. We may as well just split the one we have rather than
end up with three. There are a couple places where this is mildly
inconvenient but most of the time I find it to actually be nicer.
Reviewed-by: Jesse Natalie <jenatali@microsoft.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6945>
For UBO accesses to be the same performance as classic GL default uniform
block uniforms, we need to be able to push them through the same path. On
freedreno, we haven't been uploading UBOs as push constants when they're
used for indirect array access, because we don't know what range of the
UBO is needed for an access.
I believe we won't be able to calculate the range in general in spirv
given casts that can happen, so we define a [0, ~0] range to be "We don't
know anything". We use that at the moment for all UBO loads except for
nir_lower_uniforms_to_ubo, where we now avoid losing the range information
that default uniform block loads come with.
In a departure from other NIR intrinsics with a "base", I didn't make the
base an be something you have to add to the src[1] offset. This keeps us
from needing to modify all drivers (particularly since the base+offset
thing can mean needing to do addition in the backend), makes backend
tracking of ranges easy, and makes the range calculations in
load_store_vectorizer reasonable. However, this could definitely cause
some confusion for people used to the normal NIR base.
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6359>
The state->shader is missing when used outside of nir_print_shader, just
drop these details in that case. We can fix nir_print_instr() to look up
the shader, but let's also make sure that an instr detached from a shader
(such as one you're constructing but haven't yet inserted) still works.
Fixes: 2b1ef5df4e ("nir: print IO semantics (v2)")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6496>
Instead of having separate lists of variables, roughly sorted by mode,
use a single list for all shader-level NIR variables. This makes a few
list walks a bit longer here and there but list walks aren't a very
common thing in NIR at all. On the other hand, it makes a lot of things
like validation, printing, etc. way simpler. Also, there are a number
of cases where we move variables from inputs/outputs to globals and this
makes it way easier because we no longer have to move them between
lists. We only have to deal with that if moving them from the shader to
a nir_function_impl.
Reviewed-by: Rob Clark <robdclark@chromium.org>
Reviewed-By: Mike Blumenkrantz <michael.blumenkrantz@gmail.com>
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5966>
Whenever a struct type is decorated Block or BufferBlock we turn that
into a GLSL_TYPE_INTERFACE. Since these decorations can end up random
places, we should allow them for constants.
Closes: #3252
Fixes: 9d0ae777dd "spirv: Use interface type for block and buffer..."
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5855>
SPIRV OpControlBarrier can have both a memory and a control barrier
which some hardware can handle with a single instruction. Let's
turn the scoped_memory_barrier into a scoped barrier which can embed
both barrier types. Note that control-only or memory-only barriers can
be supported through this new intrinsic by passing NIR_SCOPE_NONE to the
unused barrier type.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4900>
If a nir_variable is tagged with per_view, it must be an array with
size corresponding to the number of views. For slot-tracking, it is
considered to take just the slot for a single element -- drivers will
take care of expanding this appropriately.
This will be used to implement the ability of having per-view position
in a vertex shader in Intel platforms.
Acked-by: Rafael Antognolli <rafael.antognolli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/2313>
Add a pointer_initializer field to nir_variable analogous to
constant_initializer, which can be used to initialize the nir_variable
to a pointer to another nir_variable. Just like the
constant_initializer, the pointer_initializer gets eliminated in the
nir_lower_constant_initializers pass.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>
This means you can directly use format utils on it without having to have
your own GL enum to number-of-components switch statement (or whatever) in
your vulkan backend.
Thanks to imirkin for fixing up the nouveau driver (and a couple of core
details).
This fixes the computed qualifiers for EXT_shader_image_load_store's
non-integer sizeNxM qualifiers, which we don't have tests for.
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com> (v3d)
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3355>
A few hash_table users roll their own integer hash functions which
call _mesa_hash_data to perform the hashing which ultimately calls
into XXH32 with a dynamic key length. When using small keys with a
constant size the hash rate can be greatly improved by inlining
XXH32 and providing it a constant key length, see:
https://fastcompression.blogspot.com/2018/03/xxhash-for-small-keys-impressive-power.html
Additionally, this patch removes calls to _mesa_key_hash_string and
makes them instead call _mesa_has_string directly, matching the new
integer hash functions.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3475>
This introduces:
- nir_texop_fragment_mask_fetch (fetch a fragment mask from a
compressed multisampled color surface)
- nir_texop_fragment_fetch (fetch a color fragment for a
particular sample at corresponding fragment mask index).
These two texture operations are necessary for implementing
SPV_AMD_shader_fragment_mask.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3304>
This introduces new vec8 and vec16 instructions (which are the only
instructions taking more than 4 sources), in order to construct 8 and 16
component vectors.
In order to avoid fixing up the non-autogenerated nir_build_alu() sites
and making them pass 16 src args for the benefit of the two instructions
that take more than 4 srcs (ie vec8 and vec16), nir_build_alu() is has
nir_build_alu_tail() split out and re-used by nir_build_alu2() (which is
used for the > 4 src args case).
v2 (Karol Herbst):
use nir_build_alu2 for vec8 and vec16
use python's array multiplication syntax
add nir_op_vec helper
simplify nir_vec
nir_build_alu_tail -> nir_builder_alu_instr_finish_and_insert
use nir_build_alu for opcodes with <= 4 sources
v3 (Karol Herbst):
fix nir_serialize
v4 (Dave Airlie):
fix serialization of glsl_type
handle vec8/16 in lowering of bools
v5 (Karol Herbst):
fix load store vectorizer
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Add a NIR instrinsic that represent a memory barrier in SPIR-V /
Vulkan Memory Model, with extra attributes that describe the barrier:
- Ordering: whether is an Acquire or Release;
- "Cache control": availability ("ensure this gets written in the memory")
and visibility ("ensure my cache is up to date when I'm reading");
- Variable modes: which memory types this barrier applies to;
- Scope: how far this barrier applies.
Note that unlike in SPIR-V, the "Storage Semantics" and the "Memory
Semantics" are split into two different attributes so we can use
variable modes for the former.
NIR passes that took barriers in consideration were also changed
- nir_opt_copy_prop_vars: clean up the values for the mode of an
ACQUIRE barrier. Copy propagation effect is to "pull up a load" (by
not performing it), which is what ACQUIRE restricts.
- nir_opt_dead_write_vars and nir_opt_combine_writes: clean up the
pending writes for the modes of an RELEASE barrier. Dead writes
effect is to "push down a store", which is what RELEASE restricts.
- nir_opt_access: treat the ACQUIRE and RELEASE as a full barrier for
the modes. This is conservative, but since this is a GL-specific
pass, doesn't make a difference for now.
v2: Fix the scoped barrier handling in copy propagation. (Jason)
Add scoped barrier handling to nir_opt_access and
nir_opt_combine_writes. (Rhys)
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is like nir_texop_tex, but signals that the sampling coordinates
are immutable during the shader stage, in a way that allows the HW
that supports pre-dispatching sampling operations to pre-fetch
the result prior to scheduling the shader stage.
This is introduced to support the feature in Freedreno. Adreno HW
from a4xx supports it.
A NIR pass introduced later in this series will detect sampling
operations that are eligible for pre-dispatch, and replace
nir_texop_tex by this new op, to tell the backend to enable
pre-fetch.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
This introduces two new lowering passes. One to lower VS to explicit
outputs using STLW and one to lower GS to load input using LDLW and
implement the GS specific functionality.
Signed-off-by: Kristian H. Kristensen <hoegsberg@google.com>
