This wasn't much of a problem before because vk_command_buffer_finish()
doesn't do much on an empty command buffer. However, it's about to be
responsible for managing the pool's list of command buffers so it will
be critical to get this right.
Fixes: c9189f4813 ("anv: Use a common vk_command_buffer structure")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14917>
The Vulkan 1.2.184 spec says:
"When creating a VkImageView, if sampler Y′CBCR conversion is
enabled in the sampler, the aspectMask of a subresourceRange used by
the VkImageView must be VK_IMAGE_ASPECT_COLOR_BIT.
When creating a VkImageView, if sampler Y′CBCR conversion is not
enabled in the sampler and the image format is multi-planar, the
image must have been created with
VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT, and the aspectMask of the
VkImageView’s subresourceRange must be VK_IMAGE_ASPECT_PLANE_0_BIT,
VK_IMAGE_ASPECT_PLANE_1_BIT or VK_IMAGE_ASPECT_PLANE_2_BIT."
Previously, for YCbCr images, we were flipping this around. For single-
plane views where VK_IMAGE_ASPECT_PLANE_N_BIT would be passed in by the
app, we would store VK_IMAGE_ASPECT_COLOR_BIT. For multi-plane views
where the client says VK_IMAGE_ASPECT_COLOR_BIT, we would store a all of
the planes. (There was also an extra bit of remapping that would
compact the planes in the non-existent case of a format with a non-
contiguous set of planes.) The idea behind this was that for things
like rendering or single-plane sampling, storage, or compute, we want it
to look as much like a single-plane image as possible but we wanted the
multi-plane case to be the awkward one.
This commit changes it around so that iview->aspects is always exactly
the subset of image->vk.aspects represented by the view. This is
identical to how aspects work for depth/stencil so it gains us some
consistency.
This commit also changes anv_image_view::aspect_mask to aspects to force
a full audit of the field. As can be seen, there are only a few uses of
this field and they're all mostly fine:
- A bunch of them are used to check for depth/stencil. That hasn't
changed.
- Most of the checks for color already used ANY_COLOR_BIT, only one
needed fixing.
- There's a check that both src/depth are color for MSAA resolves.
However, we don't support MSAA on YCbCr so there's no point in
checking for ANY_COLOR_BIT.
There is a hidden usage of planes in anv_descriptor_set_write_image_view
that's not as obvious. However, this function simply looks at
anv_image_view::n_planes and blindly fills out the descriptor
accordingly. As long as image views with a single plane continue to
claim n_planes == 1, this will be fine.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
When vkCmdPushDescriptorSetKHR is used, the descriptor set is allocated
internally without belonging to any pool. Such descriptor set will be
visible on the GPU side because it's a part of the dynamic state stream,
but we still have to store its address in the array of descriptor sets.
Complements: 379b9bb7b0 ("anv: Support fetching descriptor addresses from push constants")
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11577>
This makes dEQP-VK.api.version_check.entry_points pass and matches how
other drivers are handling this case. We do not support the feature but
still need to provide a dummy entrypoint.
v2: throw error if/when called (Jason)
Fixes: 0d031d1da3 ("anv: toggle on VK_EXT_extended_dynamic_state2")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11503>
Available on Gen11+.
v2: Order shading rate in correct order (Samuel)
v3: Move CPS_STATE emission to genX_state.c
v4: Don't override various output structures (Jason)
v5: Rebase on top master (Lionel)
v6: Fix invalid VkPhysicalDeviceFragmentShadingRatePropertiesKHR
(min|max)FragmentShadingRateAttachmentTexelSize values (Ken)
Drop #endif comment
v7: Limit extension to Gfx11+ (Lionel)
Support conservative raster (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7455>
This unifies performance data gathering between the GL & Vulkan
drivers.
v2: Also move all NOOPs to before the query, leaving none inside
v3: Capture the query beging registers in reverse order to ensure
timestamp is as close as possible from measured draw call.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/6518>
Allowing the user to set custom sample locations, by filling the
extension structs and chaining them to the pipeline structs according
to the Vulkan specification section [26.5. Custom Sample Locations]
for the following structures:
'VkPipelineSampleLocationsStateCreateInfoEXT'
'VkSampleLocationsInfoEXT'
'VkSampleLocationEXT'
Once custom locations are used, the default locations are lost and need
to be re-emitted again in the next pipeline creation. For that, we emit
the 3DSTATE_SAMPLE_PATTERN at every pipeline creation.
v2: In v1, we used the custom anv_sample struct to store the location
and the distance from the pixel center because we would then use
this distance to sort the locations and send them in increasing
monotonical order to the GPU. That was because the Skylake PRM Vol.
2a "3DSTATE_SAMPLE_PATTERN" says that the samples must have
monotonically increasing distance from the pixel center to get the
correct centroid computation in the device. However, the Vulkan
spec seems to require that the samples occur in the order provided
through the API and this requirement is only for the standard
locations. As long as this only affects centroid calculations as
the docs say, we should be ok because OpenGL and Vulkan only
require that the centroid be some lit sample and that it's the same
for all samples in a pixel; they have no requirement that it be the
one closest to center. (Jason Ekstrand)
For that we made the following changes:
1- We removed the custom structs and functions from anv_private.h
and anv_sample_locations.h and anv_sample_locations.c (the last
two files were removed). (Jason Ekstrand)
2- We modified the macros used to take also the array as parameter
and we renamed them to start by GEN_. (Jason Ekstrand)
3- We don't sort the samples anymore. (Jason Ekstrand)
v3 (Jason Ekstrand):
Break the refactoring out into multiple commits
v4: Merge dynamic/non-dynamic changes into a single commit (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/1887>
On Gen12+, we can enable additional caches in certain usage situations.
This routes that decision making to a central place in ISL, based on
surface usage flags, and updates both drivers to use it. (i965 doesn't
need to change because it doesn't support Gen12.)
We continue handling the "external" decision via an anv_mocs() wrapper
for now, since we store that flag in anv_bo, which isl doesn't know
about. (We could introduce an ISL_SURF_USAGE_EXTERNAL, but I'm not
actually sure that would be cleaner.)
This patch should not have any functional nor performance effects, as
we continue selecting the exact same MOCS values for now.
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/7104>
