It's called anv_image_* so it really should take an anv_image. For the
couple of cases where we really want to pass in a set of aspects, we
leave an anv_aspect_to_plane() helper. anv_image_aspect_to_plane() is
then just a wrapper around it which grabs the aspects from the image.
While we're in the area, sprinkle some const around.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
The Vulkan 1.2.184 spec says:
"When creating a VkImageView, if sampler Y′CBCR conversion is
enabled in the sampler, the aspectMask of a subresourceRange used by
the VkImageView must be VK_IMAGE_ASPECT_COLOR_BIT.
When creating a VkImageView, if sampler Y′CBCR conversion is not
enabled in the sampler and the image format is multi-planar, the
image must have been created with
VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT, and the aspectMask of the
VkImageView’s subresourceRange must be VK_IMAGE_ASPECT_PLANE_0_BIT,
VK_IMAGE_ASPECT_PLANE_1_BIT or VK_IMAGE_ASPECT_PLANE_2_BIT."
Previously, for YCbCr images, we were flipping this around. For single-
plane views where VK_IMAGE_ASPECT_PLANE_N_BIT would be passed in by the
app, we would store VK_IMAGE_ASPECT_COLOR_BIT. For multi-plane views
where the client says VK_IMAGE_ASPECT_COLOR_BIT, we would store a all of
the planes. (There was also an extra bit of remapping that would
compact the planes in the non-existent case of a format with a non-
contiguous set of planes.) The idea behind this was that for things
like rendering or single-plane sampling, storage, or compute, we want it
to look as much like a single-plane image as possible but we wanted the
multi-plane case to be the awkward one.
This commit changes it around so that iview->aspects is always exactly
the subset of image->vk.aspects represented by the view. This is
identical to how aspects work for depth/stencil so it gains us some
consistency.
This commit also changes anv_image_view::aspect_mask to aspects to force
a full audit of the field. As can be seen, there are only a few uses of
this field and they're all mostly fine:
- A bunch of them are used to check for depth/stencil. That hasn't
changed.
- Most of the checks for color already used ANY_COLOR_BIT, only one
needed fixing.
- There's a check that both src/depth are color for MSAA resolves.
However, we don't support MSAA on YCbCr so there's no point in
checking for ANY_COLOR_BIT.
There is a hidden usage of planes in anv_descriptor_set_write_image_view
that's not as obvious. However, this function simply looks at
anv_image_view::n_planes and blindly fills out the descriptor
accordingly. As long as image views with a single plane continue to
claim n_planes == 1, this will be fine.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
When creating a single-plane view of a multi-plane image, we were
relying on vplane_aspect to be VK_IMAGE_ASPECT_COLOR_BIT so that
anv_get_format_plane of the single-plane view format would work.
Instead of relying on this quirk, we can drop vplane_aspect and rely
entirely on vplane to only be 0 in this case. In the case of depth or
stencil images, we still need to grab the format aspect but we can use
the actual aspect and don't need the vplane_aspect trickery.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12141>
The current code we have for this is a bit of a mess, likely due to
trying too hard to put it in anv_android.c. The external_format bit in
anv_image, for instance, really means "quit creation early" which is
something we want to do for AHardwareBuffer imports regardless of
whether or not they use a native format. It gets set both by declaring
an AHardwareBuffer external handle type and by VkExternalFormatANDROID.
However, VkExternalFormatANDROID is only allowed for AHardwareBuffer
imports. If we ever did get an external format outside the context of
an AHardwareBuffer import, we would end up with a useless partially
created image.
When we detect an AHardwareBuffer import, we punt off to a function in
anv_android.c that does nothing interesting but call anv_create_image
with AUX disabled and external_format = true. The aux disable here is
useless because the actual isl_surf layout is done by resolve_ahw_image
which also sets ISL_SURF_USAGE_DISABLE_AUX_BIT. As far as external
formats go, anv_image_from_external() sets it regardless of whether or
not there is actually an external format.
This commit replaces anv_image::external_format with anv_image::from_ahb
which is the thing we actually want to track for this. We delete
anv_image_from_external and a bunch of the external_format handling
because it's all useless. The end result is massively simpler and,
while it appears to blur the boundary between Android code and the rest
of the driver, it makes the whole flow more obvious.
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/12040>
Cherryview is weird in that the actual limits we can expose through GL
are dependent on fusing information which is only obtainable at runtime.
The same PCI ID may have different configurations with different maximum
CS thread counts. We currently handle this in i965 and ANV by doing the
calculation in the driver.
This dates back to when intel_device_info was computed from the PCI ID.
Now that we have get_device_info_from_fd, we can move the CHV stuff
there and get it out of the driver. This fixes CHV thread counts on
crocus as well.
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11861>
When vkCmdPushDescriptorSetKHR is used, the descriptor set is allocated
internally without belonging to any pool. Such descriptor set will be
visible on the GPU side because it's a part of the dynamic state stream,
but we still have to store its address in the array of descriptor sets.
Complements: 379b9bb7b0 ("anv: Support fetching descriptor addresses from push constants")
Signed-off-by: Marcin Ślusarz <marcin.slusarz@intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11577>
This is the first time we see an application running out of mmap().
We essentially allocate too many batches (+65k) and end up not being
able to mmap them, at which point we can't mmap anything anymore and
things go sideways.
This change allocates bigger batch BOs as we grow an existing command
buffer. This drastically reduces the number of BOs we need to allocate
(the benchmark that reported the issue now reaches a max of ~630 BOs,
instead of reaching 65k and failing previously).
v2: Track the total batch size of command buffers (Jason)
Just give 0 for batch_len to i915 (Jason)
v3: Fix indentation (Jason)
v4: Drop uncessary reshuffling of error labels (Jason)
v5: Remove empty lines (Marcin)
v6: Limit BO growing to chunks of 16Mb (Jason)
v7: Add assert on initial size (Jason)
v8: Add define for max size (Jason)
v9: Fixup v7 assert for non softpin platforms (Lionel)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/4956
Cc: mesa-stable
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11482>
This allows us to convert a 64-bit address to an anv_address which is
useful for working with device addresses.
v2: switch to int64_t to keep state pool relative relocation working
on non-softpin platforms
v3: Update assert to reflect relative offsets (Jason)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
These don't necessarily go in any group but are required for dispatch to
work properly. The trampoline is a compute shader that is the initial
start point for the trace. It's in charge of invoking the actual
ray-gen shader. The trivial return shader is used whenever another
shader is missing and it does no work except the minimum required to do
a stack return.
v2: Rebase on upstream changes (Lionel)
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/8637>
This has two steps. First, for each range we look at the memory object
and see if it actually needs flushing before we start throwing CLFLUSH
instructions. Second, we look at the whole list of types on device
initialization and decide whether or not we need CLFLUSH at all. The
first part should speed up atom chips a bit since we're currently
CLFLUSHing everything even when we don't need to. The second isn't
needed on most of today's parts because we base it on !has_llc but it is
needed for discrete parts. It's also over-all cleaner.
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Felix DeGrood <felix.j.degrood@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11364>
On Gfx12+, flushing tile cache ensures color/depth values are
globally visible, but that's expensive. Most operations only
need values to be GT-visible which can be achieved with depth
or rt flush. Remove a bunch of unnecessary Tile Cache flushes.
Fast clears and slow depth clears still require Tile Cache flush.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/9834>
The relocation list currently serves two purposes. One is for
relocations on older non-softpin platforms. The second is to keep track
of driver-managed BOs which are used by the given command buffer. We
going to need a mechanism to add BOs to the command buffer without doing
a relocation into the batch.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/11236>
