Create the video buffers in the format the driver preffers.
This temporary creates problems with decoder less VDPAU video playback.
Signed-off-by: Christian König <deathsimple@vodafone.de>
Add a second extened constructor that takes plane
textures for the video buffer. Also provide a
function for texture templates.
Signed-off-by: Christian König <deathsimple@vodafone.de>
This requires GLSL 1.30 enabled, which requires integer types enabled,
so don't bother doing an INT to FLT conversion on it.
We should probably remove the instance id flt->int conversion when
turning on native integers.
this passes the three piglit tests with GLSL 1.30 forced on.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit rewrites a lot of the state_fb code to support
rendering to targets not aligned to 64 byte.
This allows us to drop the render temporaries as unaligned
targets are the only use-case where they are really needed. The
temporaries code was used for a lot of things more, but apparently
those also work without temps.
There is one regression in piglit fbo-clear-formats, but this will
be fixed with the use of real hardware clears and doesn't matter in
practice as no real application tries to scissor clear a 2x2 pixel
render target.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
There are 3 changes:
1) stride is specified for each buffer, not just one, so that drivers don't
have to derive it from the outputs
2) new per-output property dst_offset, which specifies the offset
into the buffer in dwords where the output should be stored,
so that drivers don't have to compute the offsets manually;
this will also be useful for gl_SkipComponents
from ARB_transform_feedback3
3) register_mask is removed, instead, there is start_component
and num_components; register_mask with non-consecutive 1s
doesn't make much sense (some hardware cannot do packing of components)
Christoph Bumiller: fixed nvc0.
v2: resolve merge conflicts in Draw and clean it up
Virtual address space put the userspace in charge of their GPU
address space. It's up to userspace to bind bo into the virtual
address space. Command stream can them be executed using the
IB_VM chunck.
This patch add support for this configuration. It doesn't remove
the 64K ib size limit thought this limit can be extanded up to
1M for IB_VM chunk.
v2: fix rendering
v3: fix rendering when using index buffer
v4: make vm conditional on kernel support add basic va management
v5: catch the case when we already have va for a bo
v6: agd5f: update on top of ioctl changes
v7: agd5f: further ioctl updates
v8: indentation cleanup + fix non cayman
v9: rebase against lastest mesa + improvement from Marek & Michel
v10: fix cut/paste bug
v11: don't rely on updated radeon_drm.h
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make the comments precise. Explain why each branch is needed and correct.
Document the potential pitfall in the true-branch.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
When using Mesa with a GLES API, calling _mesa_FramebufferRenderbuffer
with GL_DRAW_FRAMEBUFFER will report a 'user error' because
get_framebuffer_target validates that this enum from the framebuffer
blit extension is only used on GL. To work around it this patch makes
it use the GL_FRAMEBUFFER enum instead in that case.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43418
Note: This is a candidate for the 8.0 branch.
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>
The gl_renderbuffer::Format field wasn't always set properly. This
didn't matter much in the past but with the recent swrast/renderbuffer
mapping changes, core Mesa will be directly touching OSMesa colorbuffers
so using the right MESA_FORMAT_x value is important.
Unfortunately, there aren't MESA_FORMATs for all the possible OSmesa
format/type combinations, such as GL_FLOAT / OSMESA_ARGB. If anyone
runs into these we can add new Mesa formats.
v2: add warnings for unsupported formats, fix ARGB_REV mix-up.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
We always access pull constant buffers using the message types "OWord
Block Read" or "OWord Dual Block Read". According to the Sandy Bridge
PRM, Vol 4 Part 1, pages 214 and 218, when using these messages:
"the surface pitch is ignored, the surface is treated as a
1-dimensional surface. An element size (pitch) of 16 bytes is
used to determine the size of the buffer for out-of-bounds
checking if using the surface state model."
Previously we were setting the pitch for pull constant buffers to the
size of the whole constant buffer--this made no sense and would have
led to incorrect behavior if it were not for the fact that the pitch
is ignored.
For clarity, this patch sets the pitch for pull constant buffers to 16
bytes, consistent with the hardware's behavior.
v2: Clarify the meaning of the ignored values by writing them as (16 - 1).
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Commit 9bdc44a528 (i965: Replace struct
with bit shifting for WM pull constant surfaces) accidentally
introduced off-by-one errors into the calculation of the surface
width, height, and depth. This patch restores the correct
computation.
The reason this wasn't noticed by Piglit tests is that the size of our
constant surfaces is always less than 2^20, therefore the off-by-one
error was causing the "depth" field of the surface to be set to all
1's. The hardware interpreted this as an extremely large surface, so
overflow checking was effectively disabled.
No Piglit regressions on Sandy Bridge.
NOTE: This is a candidate for the 7.11 and 8.0 branches.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Flat SHADE_MODEL still overrides any non-flat interpolation
qualifier, but pulling that state out of the rasterizer cso
isn't really worth the effort, is it ?
NOTE: This is a candidate for the 8.0 branch.
This fixes accum buffer operations. The accumulation buffer is the
only malloc-based renderbuffer for the intel drivers.
v2: apply x/y offset to returned pointer
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: Eric Anholt <eric@anholt.net>
Fixes piglit EXT_framebuffer_multisample/negative-copypixels.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample/negative-copyteximage.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample-negative-readpixels.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Fixes piglit EXT_framebuffer_multisample/renderbuffer-samples.
Reviewed-by: Brian Paul <brianp@vmware.com>
NOTE: This is a candidate for the 8.0 branch.
Previously, we were saying that everything from the starting tile to
region width+height was part of the limits of our depthbuffer, even if
the tile was near the bottom of the depthbuffer. This mean that our
range was not clipping to buffer buonds if the start tile was anything
but the start of the buffer.
In bebc91f0f3, this was changed to
saying that we're just rendering to a region of the size of the
renderbuffer. This is great -- we get a range that should actually
match what we want. However, the hardware's range checking occurs
after the X/Y offset addition, so we were clipping out rendering to
small depth mip levels when an X/Y offset was present. Just add
tile_x/y to the width in that case -- the WM won't produce negative
x/y values pre-offset, so we just need to get the left/bottom sides of
the region to cover our buffer.
Fixes the following Piglit regressions on gen7:
spec/ARB_depth_buffer_float/fbo-clear-formats
spec/ARB_depth_texture/fbo-clear-formats
spec/EXT_packed_depth_stencil/fbo-clear-formats
NOTE: This is a candidate for the 8.0 branch.
The array holds GLuint values so remove the float cast.
Note, however, that to compute the average of four GLuints we really
want to do (a+b+c+d)/4 but that could overflow. This change doesn't
address that for now.
NOTE: This is a candidate for the 8.0 branch.
Reviewed-by: José Fonseca <jfonseca@vmware.com>
