Also change count from a pointer into a value. We were supposed to
be resetting it to 0 (and failed to), but that's gone since we dropped
the pre-ascii85 handling.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Error state files used to look like:
render ring --- gtt_offset = 0x0e8f6000
00000000 : 69040000
00000004 : 79090000
...
00007ffc : 00000000
--- ringbuffer = 0x00001000
There were thousands of lines between sections. The file format changed
with Kernel 4.10, and now has a single ascii85-encoded line following
each section heading. This is much easier to parse.
There are a bunch of bugs in our handling of the old style format,
where we'd decode the wrong data, at the wrong time. Fixing all of
these is going to be a giant pain. It's also a lot of extra code
complexity. In order to properly decode indirect state, or compute
shaders, we'll also need to parse data in advance of decoding, which
is going to be a giant pain with this ad-hoc "decode everywhere!"
mentality. So, let's just drop support for the older file format.
This unfortunately requires an error state generated by Kernel 4.10 or
later. That's probably not the end of the world, as we encourage users
to upgrade to the latest kernel when encountering GPU hangs anyway. It
might be a giant pain for people with LTS kernels, though...
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
The dashes "---" may occur within an ascii85 block, but only an ascii85
block starts with ':' or '~'.
Ported from Chris Wilson's intel-gpu-tools commit:
bceec7e1d8a160226b783c6344eae8cbf4ece144
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
It's a neat idea, and still useful in some cases, but the intel common
code is used by i965 and anvil only, this is a little clearer.
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Using build_by_default : false is convenient for dependencies that can
be pulled in by various diverse components of the build system, the
gallium hardware/software drivers and state trackers do not fit that
description. Instead, these should be guarded using the variable that tracks
whether that driver should be enabled.
This leaves a few helper libraries: trace, rbug, etc, and the generic
winsys bits as `build_by_default : false` because there are a large
number of gallium components that pull them in.
v2: - remove build_by_default from winsys convenience libs as well.
v3: - Always put drivers before winsys for consistency
Signed-off-by: Dylan Baker <dylanx.c.baker@intel.com>
Tested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> (v1)
Reviewed-by: Eric Anholt <eric@anholt.net>
This handles the bits >= 32 corner case in bitfieldInsert.
Fixes:
tests/spec/arb_gpu_shader5/execution/built-in-functions/fs-bitfieldInsert.shader_test.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Like
radeonsi: generate GS prolog to (partially) fix triangle strip adjacency rotation
evergreen hw suffers from the same problem, so rotate the
geometry inputs to fix this.
This fixes:
./bin/glsl-1.50-geometry-primitive-types GL_TRIANGLE_STRIP_ADJACENCY
on evergreen.
Signed-off-by: Dave Airlie <airlied@redhat.com>
As per radeonsi, the tess factor components for isolines
are reversed.
Fixes: tests/spec/arb_tessellation_shader/execution/isoline.shader_test
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
r0 in input into vertex shaders contains things like vertexid,
we need to reserve it even if we have no inputs.
This fixes a bunch of tessellation piglits.
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The window-system auto-detection code (specifically for glx) relies on
with_any_vk being available. This fixes the Vulkan-only build. Also,
this puts it up near the handling of -Ddri-drivers and -Dgallium-drivers
which seems to make a bit more sense.
Fixes: 118a7f0441 "meson: add support for xlib glx"
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
It should be perfectly valid to build a completely headless Vulkan
driver. We don't need to require a platform.
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
The previous iteration algorithm would advance the field pointer right
after we advance the group. This meant that you would end up with
skipping the first field of the group. In the common case, where the
only field is a struct (e.g. 3DSTATE_VERTEX_BUFFERS), it would get
skipped entirely.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
They serve no purpose other than to just fill empty space in the packet
so each dword has something. Just disallowing empty groups is a bit
easier on some of the tools. This does not change the generated packing
headers in any way.
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Gather operations in both GLSL and SPIR-V require a sampler. Fixes
gathers returning garbage when using separate texture/samplers (on AMD,
was using an invalid sampler descriptor).
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
We should use the result type of the OpSampledImage opcode, rather than
the type of the underlying image/samplers.
This resolves an issue when using separate images and shadow samplers
with glslang. Example:
layout (...) uniform samplerShadow s0;
layout (...) uniform texture2D res0;
...
float result = textureLod(sampler2DShadow(res0, s0), uv, 0);
For this, for the combined OpSampledImage, the type of the base image
was being used (which does not have the Depth flag set, whereas the
result type does), therefore it was not being recognised as a shadow
sampler. This led to the wrong LLVM intrinsics being emitted by RADV.
Signed-off-by: Alex Smith <asmith@feralinteractive.com>
Cc: "17.2 17.3" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
It turned out that with recent changes that call into dri3 from glFinish(),
it appears like different thread end up waiting for X events simultaneously,
causing deadlocks since they steal events from eachoter and update the dri3
counters behind eachothers backs.
This patch intends to improve on that. It allows at most one thread at a
time to wait on events for a single drawable. If another thread intends to
do the same, it's put to sleep until the first thread finishes waiting, and
then it rechecks counters and optionally retries the waiting. Threads that
poll for X events never pulls X events off the event queue if there are
other threads waiting for events on that drawable. Counters in the
dri3 drawable structure are protected by a mutex. Finally, the mutex we
introduce is never held while waiting for the X server to avoid
unnecessary stalls.
This does not make dri3 drawables completely thread-safe but at least it's a
first step.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102358
Fixes: d5ba75f888 "st/dri2 Plumb the flush_swapbuffer functionality through to dri3"
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
v2: include the file also in the meson.build (Eric Engestrom).
Fixes: f1e1c60ff6 ("etnaviv: Update from rnndb")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Patch adds support and capability to match with new surface attribute,
component type. Currently no configs with floating point type are exposed.
With this change, following dEQP test starts to pass:
dEQP-EGL.functional.choose_config.color_component_type_ext.dont_care
dEQP-EGL.functional.choose_config.color_component_type_ext.fixed
dEQP-EGL.functional.choose_config.color_component_type_ext.float
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
This should not be needed, if the allocation fails an error is
returned and the host should handle it.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Instead just dirty RADV_CMD_DIRTY_FRAMEBUFFER and it will be
re-emitted if necessary before the next draw.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Just after the vertex shader.
This seems to give a minor boost for, at least, Serious Sam
Fusion 2017 and Dawn of War 3. I don't see any real impacts
with The Talos Principle.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
This is what we do in the condition too, so it makes sense.
v2: Only compute without_array() once (Ilia).
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
This register is the same on all gpus so far, so emit it in one
place and also for the pre-gfx9 gpus set the value in the pipeline
creation.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This moves some calculations of register values into the pipeline
construction, it saves looking at outinfo in the cmd buffer emit.
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
In case an instruction only writes one register, and it is .x, we can
skip the extra level of fanout indirection.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Seems to fix dEQP compute related tests.. and matches what i965 does, so
perhaps there is some assumption that std430 packing is on by default
somewhere in NIR?
