Update the doxygen configuration file.

Minor updates/fixes to the source documentation.

doxygen/README

@@ -6,5 +6,5 @@ See http://www.doxygen.org/ for more info.
 Either run 'make' (Unix) or 'doxy.bat' (Windows) to run doxygen
 and generate souce code documentation.
 
-Then, load either doxy/core/index.html or doxy/core_subset/index.html into
+Then, load either doxygen/main/index.html or doxygen/core_subset/index.html into
 your web browser.

doxygen/array_cache.doxy

@@ -40,7 +40,7 @@ SKIP_FUNCTION_MACROS   = YES
 #---------------------------------------------------------------------------
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
-TAGFILES               = core.tag=../core \
+TAGFILES               = main.tag=../core \
 			 tnl.tag=../tnl \
 			 swrast_setup.tag=../swrast_setup \
 			 swrast.tag=../swrast \

doxygen/common.doxy

@@ -1,4 +1,4 @@
-# Doxyfile 1.3.2
+# Doxyfile 1.3.8
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project
@@ -11,7 +11,7 @@
 # Values that contain spaces should be placed between quotes (" ")
 
 #---------------------------------------------------------------------------
-# General configuration options
+# Project related configuration options
 #---------------------------------------------------------------------------
 
 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded 
@@ -32,14 +32,24 @@ PROJECT_NUMBER         = 6.1
 
 OUTPUT_DIRECTORY       = 
 
+# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 
+# 4096 sub-directories (in 2 levels) under the output directory of each output 
+# format and will distribute the generated files over these directories. 
+# Enabling this option can be useful when feeding doxygen a huge amount of source 
+# files, where putting all generated files in the same directory would otherwise 
+# cause performance problems for the file system.
+
+CREATE_SUBDIRS         = NO
+
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all 
 # documentation generated by doxygen is written. Doxygen will use this 
 # information to generate all constant output in the proper language. 
 # The default language is English, other supported languages are: 
-# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, 
+# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, 
-# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en 
+# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, 
-# (Japanese with English messages), Korean, Norwegian, Polish, Portuguese, 
+# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, 
-# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
+# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, 
+# Swedish, and Ukrainian.
 
 OUTPUT_LANGUAGE        = English
 
@@ -53,6 +63,150 @@ OUTPUT_LANGUAGE        = English
 
 USE_WINDOWS_ENCODING   = NO
 
+# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
+# include brief member descriptions after the members that are listed in 
+# the file and class documentation (similar to JavaDoc). 
+# Set to NO to disable this.
+
+BRIEF_MEMBER_DESC      = YES
+
+# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
+# the brief description of a member or function before the detailed description. 
+# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
+# brief descriptions will be completely suppressed.
+
+REPEAT_BRIEF           = YES
+
+# This tag implements a quasi-intelligent brief description abbreviator 
+# that is used to form the text in various listings. Each string 
+# in this list, if found as the leading text of the brief description, will be 
+# stripped from the text and the result after processing the whole list, is used 
+# as the annotated text. Otherwise, the brief description is used as-is. If left 
+# blank, the following values are used ("$name" is automatically replaced with the 
+# name of the entity): "The $name class" "The $name widget" "The $name file" 
+# "is" "provides" "specifies" "contains" "represents" "a" "an" "the"
+
+ABBREVIATE_BRIEF       = 
+
+# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
+# Doxygen will generate a detailed section even if there is only a brief 
+# description.
+
+ALWAYS_DETAILED_SEC    = NO
+
+# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
+# members of a class in the documentation of that class as if those members were 
+# ordinary class members. Constructors, destructors and assignment operators of 
+# the base classes will not be shown.
+
+INLINE_INHERITED_MEMB  = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
+# path before files name in the file list and in the header files. If set 
+# to NO the shortest path that makes the file name unique will be used.
+
+FULL_PATH_NAMES        = NO
+
+# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
+# can be used to strip a user-defined part of the path. Stripping is 
+# only done if one of the specified strings matches the left-hand part of 
+# the path. The tag can be used to show relative paths in the file list. 
+# If left blank the directory from which doxygen is run is used as the 
+# path to strip.
+
+STRIP_FROM_PATH        = 
+
+# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of 
+# the path mentioned in the documentation of a class, which tells 
+# the reader which header file to include in order to use a class. 
+# If left blank only the name of the header file containing the class 
+# definition is used. Otherwise one should specify the include paths that 
+# are normally passed to the compiler using the -I flag.
+
+STRIP_FROM_INC_PATH    = 
+
+# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
+# (but less readable) file names. This can be useful is your file systems 
+# doesn't support long names like on DOS, Mac, or CD-ROM.
+
+SHORT_NAMES            = NO
+
+# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
+# will interpret the first line (until the first dot) of a JavaDoc-style 
+# comment as the brief description. If set to NO, the JavaDoc 
+# comments will behave just like the Qt-style comments (thus requiring an 
+# explicit @brief command for a brief description.
+
+JAVADOC_AUTOBRIEF      = YES
+
+# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
+# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
+# comments) as a brief description. This used to be the default behaviour. 
+# The new default is to treat a multi-line C++ comment block as a detailed 
+# description. Set this tag to YES if you prefer the old behaviour instead.
+
+MULTILINE_CPP_IS_BRIEF = NO
+
+# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
+# will output the detailed description near the top, like JavaDoc.
+# If set to NO, the detailed description appears after the member 
+# documentation.
+
+DETAILS_AT_TOP         = YES
+
+# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
+# member inherits the documentation from any documented member that it 
+# re-implements.
+
+INHERIT_DOCS           = YES
+
+# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
+# tag is set to YES, then doxygen will reuse the documentation of the first 
+# member in the group (if any) for the other members of the group. By default 
+# all members of a group must be documented explicitly.
+
+DISTRIBUTE_GROUP_DOC   = NO
+
+# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
+# Doxygen uses this value to replace tabs by spaces in code fragments.
+
+TAB_SIZE               = 8
+
+# This tag can be used to specify a number of aliases that acts 
+# as commands in the documentation. An alias has the form "name=value". 
+# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
+# put the command \sideeffect (or @sideeffect) in the documentation, which 
+# will result in a user-defined paragraph with heading "Side Effects:". 
+# You can put \n's in the value part of an alias to insert newlines.
+
+ALIASES                = 
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
+# only. Doxygen will then generate output that is more tailored for C. 
+# For instance, some of the names that are used will be different. The list 
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C  = YES
+
+# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
+# only. Doxygen will then generate output that is more tailored for Java. 
+# For instance, namespaces will be presented as packages, qualified scopes 
+# will look different, etc.
+
+OPTIMIZE_OUTPUT_JAVA   = NO
+
+# Set the SUBGROUPING tag to YES (the default) to allow class member groups of 
+# the same type (for instance a group of public functions) to be put as a 
+# subgroup of that type (e.g. under the Public Functions section). Set it to 
+# NO to prevent subgrouping. Alternatively, this can be done per class using 
+# the \nosubgrouping command.
+
+SUBGROUPING            = YES
+
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+
 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in 
 # documentation are documented, even if no documentation was available. 
 # Private class members and static file members will be hidden unless 
@@ -76,6 +230,13 @@ EXTRACT_STATIC         = YES
 
 EXTRACT_LOCAL_CLASSES  = YES
 
+# This flag is only useful for Objective-C code. When set to YES local 
+# methods, which are defined in the implementation section but not in 
+# the interface are included in the documentation. 
+# If set to NO (the default) only methods in the interface are included.
+
+EXTRACT_LOCAL_METHODS  = NO
+
 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all 
 # undocumented members of documented classes, files or namespaces. 
 # If set to NO (the default) these members will be included in the 
@@ -105,46 +266,6 @@ HIDE_FRIEND_COMPOUNDS  = NO
 
 HIDE_IN_BODY_DOCS      = NO
 
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will 
-# include brief member descriptions after the members that are listed in 
-# the file and class documentation (similar to JavaDoc). 
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC      = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend 
-# the brief description of a member or function before the detailed description. 
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the 
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF           = YES
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then 
-# Doxygen will generate a detailed section even if there is only a brief 
-# description.
-
-ALWAYS_DETAILED_SEC    = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited 
-# members of a class in the documentation of that class as if those members were 
-# ordinary class members. Constructors, destructors and assignment operators of 
-# the base classes will not be shown.
-
-INLINE_INHERITED_MEMB  = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full 
-# path before files name in the file list and in the header files. If set 
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES        = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag 
-# can be used to strip a user-defined part of the path. Stripping is 
-# only done if one of the specified strings matches the left-hand part of 
-# the path. It is allowed to use relative paths in the argument list.
-
-STRIP_FROM_PATH        = 
-
 # The INTERNAL_DOCS tag determines if documentation 
 # that is typed after a \internal command is included. If the tag is set 
 # to NO (the default) then the documentation will be excluded. 
@@ -156,16 +277,10 @@ INTERNAL_DOCS          = NO
 # file names in lower-case letters. If set to YES upper-case letters are also 
 # allowed. This is useful if you have classes or files whose names only differ 
 # in case and if your file system supports case sensitive file names. Windows 
-# users are advised to set this option to NO.
+# and Mac users are advised to set this option to NO.
 
 CASE_SENSE_NAMES       = YES
 
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter 
-# (but less readable) file names. This can be useful is your file systems 
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES            = NO
-
 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen 
 # will show members with their full class and namespace scopes in the 
 # documentation. If set to YES the scope will be hidden.
@@ -178,35 +293,6 @@ HIDE_SCOPE_NAMES       = NO
 
 SHOW_INCLUDE_FILES     = YES
 
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen 
-# will interpret the first line (until the first dot) of a JavaDoc-style 
-# comment as the brief description. If set to NO, the JavaDoc 
-# comments will behave just like the Qt-style comments (thus requiring an 
-# explict @brief command for a brief description.
-
-JAVADOC_AUTOBRIEF      = YES
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen 
-# treat a multi-line C++ special comment block (i.e. a block of //! or /// 
-# comments) as a brief description. This used to be the default behaviour. 
-# The new default is to treat a multi-line C++ comment block as a detailed 
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen 
-# will output the detailed description near the top, like JavaDoc.
-# If set to NO, the detailed description appears after the member 
-# documentation.
-
-DETAILS_AT_TOP         = YES
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented 
-# member inherits the documentation from any documented member that it 
-# reimplements.
-
-INHERIT_DOCS           = YES
-
 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline] 
 # is inserted in the documentation for inline members.
 
@@ -219,17 +305,22 @@ INLINE_INFO            = YES
 
 SORT_MEMBER_DOCS       = YES
 
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC 
+# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the 
-# tag is set to YES, then doxygen will reuse the documentation of the first 
+# brief documentation of file, namespace and class members alphabetically 
-# member in the group (if any) for the other members of the group. By default 
+# by member name. If set to NO (the default) the members will appear in 
-# all members of a group must be documented explicitly.
+# declaration order.
 
-DISTRIBUTE_GROUP_DOC   = NO
+SORT_BRIEF_DOCS        = NO
 
-# The TAB_SIZE tag can be used to set the number of spaces in a tab. 
+# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be 
-# Doxygen uses this value to replace tabs by spaces in code fragments.
+# sorted by fully-qualified names, including namespaces. If set to 
+# NO (the default), the class list will be sorted only by class name, 
+# not including the namespace part. 
+# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
+# Note: This option applies only to the class list, not to the 
+# alphabetical list.
 
-TAB_SIZE               = 8
+SORT_BY_SCOPE_NAME     = NO
 
 # The GENERATE_TODOLIST tag can be used to enable (YES) or 
 # disable (NO) the todo list. This list is created by putting \todo 
@@ -255,15 +346,6 @@ GENERATE_BUGLIST       = YES
 
 GENERATE_DEPRECATEDLIST= YES
 
-# This tag can be used to specify a number of aliases that acts 
-# as commands in the documentation. An alias has the form "name=value". 
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to 
-# put the command \sideeffect (or @sideeffect) in the documentation, which 
-# will result in a user-defined paragraph with heading "Side Effects:". 
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES                = 
-
 # The ENABLED_SECTIONS tag can be used to enable conditional 
 # documentation sections, marked by \if sectionname ... \endif.
 
@@ -279,20 +361,6 @@ ENABLED_SECTIONS       =
 
 MAX_INITIALIZER_LINES  = 30
 
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources 
-# only. Doxygen will then generate output that is more tailored for C. 
-# For instance, some of the names that are used will be different. The list 
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C  = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources 
-# only. Doxygen will then generate output that is more tailored for Java. 
-# For instance, namespaces will be presented as packages, qualified scopes 
-# will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA   = NO
-
 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated 
 # at the bottom of the documentation of classes and structs. If set to YES the 
 # list will mention the files that were used to generate the documentation.
@@ -356,7 +424,7 @@ INPUT                  =
 # and *.h) to filter out the source-files in the directories. If left 
 # blank the following patterns are tested: 
 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp 
-# *.h++ *.idl *.odl *.cs
+# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
 
 FILE_PATTERNS          = 
 
@@ -414,10 +482,20 @@ IMAGE_PATH             =
 # by executing (via popen()) the command <filter> <input-file>, where <filter> 
 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an 
 # input file. Doxygen will then use the output that the filter program writes 
-# to standard output.
+# to standard output.  If FILTER_PATTERNS is specified, this tag will be 
+# ignored.
 
 INPUT_FILTER           = 
 
+# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern 
+# basis.  Doxygen will compare the file name with each pattern and apply the 
+# filter if there is a match.  The filters are a list of the form: 
+# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further 
+# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER 
+# is applied to all files.
+
+FILTER_PATTERNS        = 
+
 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using 
 # INPUT_FILTER) will be used to filter the input files when producing source 
 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
@@ -429,7 +507,9 @@ FILTER_SOURCE_FILES    = NO
 #---------------------------------------------------------------------------
 
 # If the SOURCE_BROWSER tag is set to YES then a list of source files will 
-# be generated. Documented entities will be cross-referenced with these sources.
+# be generated. Documented entities will be cross-referenced with these sources. 
+# Note: To get rid of all source code in the generated output, make sure also 
+# VERBATIM_HEADERS is set to NO.
 
 SOURCE_BROWSER         = NO
 
@@ -521,7 +601,9 @@ HTML_FOOTER            =
 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading 
 # style sheet that is used by each HTML page. It can be used to 
 # fine-tune the look of the HTML output. If the tag is left blank doxygen 
-# will generate a default style sheet
+# will generate a default style sheet. Note that doxygen will try to copy 
+# the style sheet file to the HTML output directory, so don't put your own 
+# stylesheet in the HTML output directory as well, or it will be erased!
 
 HTML_STYLESHEET        = 
 
@@ -541,7 +623,7 @@ GENERATE_HTMLHELP      = NO
 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can 
 # be used to specify the file name of the resulting .chm file. You 
 # can add a path in front of the file if the result should not be 
-# written to the html output dir.
+# written to the html output directory.
 
 CHM_FILE               = 
 
@@ -676,7 +758,7 @@ LATEX_HIDE_INDICES     = NO
 #---------------------------------------------------------------------------
 
 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output 
-# The RTF output is optimised for Word 97 and may not look very pretty with 
+# The RTF output is optimized for Word 97 and may not look very pretty with 
 # other RTF readers or editors.
 
 GENERATE_RTF           = NO
@@ -703,7 +785,7 @@ COMPACT_RTF            = NO
 RTF_HYPERLINKS         = NO
 
 # Load stylesheet definitions from file. Syntax is similar to doxygen's 
-# config file, i.e. a series of assigments. You only have to provide 
+# config file, i.e. a series of assignments. You only have to provide 
 # replacements, missing definitions are set to their default value.
 
 RTF_STYLESHEET_FILE    = 
@@ -747,9 +829,7 @@ MAN_LINKS              = NO
 
 # If the GENERATE_XML tag is set to YES Doxygen will 
 # generate an XML file that captures the structure of 
-# the code including all documentation. Note that this 
+# the code including all documentation.
-# feature is still experimental and incomplete at the 
-# moment.
 
 GENERATE_XML           = NO
 
@@ -771,6 +851,13 @@ XML_SCHEMA             =
 
 XML_DTD                = 
 
+# If the XML_PROGRAMLISTING tag is set to YES Doxygen will 
+# dump the program listings (including syntax highlighting 
+# and cross-referencing information) to the XML output. Note that 
+# enabling this will significantly increase the size of the XML output.
+
+XML_PROGRAMLISTING     = YES
+
 #---------------------------------------------------------------------------
 # configuration options for the AutoGen Definitions output
 #---------------------------------------------------------------------------
@@ -881,7 +968,7 @@ EXPAND_AS_DEFINED      =
 SKIP_FUNCTION_MACROS   = YES
 
 #---------------------------------------------------------------------------
-# Configuration::addtions related to external references   
+# Configuration::additions related to external references   
 #---------------------------------------------------------------------------
 
 # The TAGFILES option can be used to specify one or more tagfiles. 
@@ -930,7 +1017,7 @@ PERL_PATH              = /usr/bin/perl
 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will 
 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or 
 # super classes. Setting the tag to NO turns the diagrams off. Note that this 
-# option is superceded by the HAVE_DOT option below. This is only a fallback. It is 
+# option is superseded by the HAVE_DOT option below. This is only a fallback. It is 
 # recommended to install and use dot, since it yields more powerful graphs.
 
 CLASS_DIAGRAMS         = YES
@@ -963,7 +1050,7 @@ CLASS_GRAPH            = YES
 COLLABORATION_GRAPH    = YES
 
 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and 
-# colloborations diagrams in a style similiar to the OMG's Unified Modeling 
+# collaboration diagrams in a style similar to the OMG's Unified Modeling 
 # Language.
 
 UML_LOOK               = NO
@@ -1057,45 +1144,10 @@ GENERATE_LEGEND        = YES
 DOT_CLEANUP            = YES
 
 #---------------------------------------------------------------------------
-# Configuration::addtions related to the search engine   
+# Configuration::additions related to the search engine   
 #---------------------------------------------------------------------------
 
 # The SEARCHENGINE tag specifies whether or not a search engine should be 
 # used. If set to NO the values of all tags below this one will be ignored.
 
 SEARCHENGINE           = NO
-
-# The CGI_NAME tag should be the name of the CGI script that 
-# starts the search engine (doxysearch) with the correct parameters. 
-# A script with this name will be generated by doxygen.
-
-CGI_NAME               = search.cgi
-
-# The CGI_URL tag should be the absolute URL to the directory where the 
-# cgi binaries are located. See the documentation of your http daemon for 
-# details.
-
-CGI_URL                = 
-
-# The DOC_URL tag should be the absolute URL to the directory where the 
-# documentation is located. If left blank the absolute path to the 
-# documentation, with file:// prepended to it, will be used.
-
-DOC_URL                = 
-
-# The DOC_ABSPATH tag should be the absolute path to the directory where the 
-# documentation is located. If left blank the directory on the local machine 
-# will be used.
-
-DOC_ABSPATH            = 
-
-# The BIN_ABSPATH tag must point to the directory where the doxysearch binary 
-# is installed.
-
-BIN_ABSPATH            = /usr/local/bin/
-
-# The EXT_DOC_PATHS tag can be used to specify one or more paths to 
-# documentation generated for other projects. This allows doxysearch to search 
-# the documentation for these projects as well.
-
-EXT_DOC_PATHS          = 

doxygen/header.html

@@ -2,7 +2,7 @@
 <link href="doxygen.css" rel="stylesheet" type="text/css">
 </head>
 <body><center>
-<a href="../core/index.html">core</a>&nbsp;
+<a href="../main/index.html">core</a>&nbsp;
 <a href="../array_cache/index.html">array_cache</a>&nbsp;
 <a href="../math/index.html">math</a>&nbsp;
 <a href="../swrast/index.html">swrast</a>&nbsp;

doxygen/math.doxy

@@ -41,7 +41,7 @@ SKIP_FUNCTION_MACROS   = YES
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
 TAGFILES               = tnl_dd.tag=../tnl_dd \
-                         core.tag=../core \
+                         main.tag=../core \
                          swrast.tag=../swrast \
                          swrast_setup.tag=../swrast_setup \
                          tnl.tag=../tnl \

doxygen/swrast.doxy

@@ -39,7 +39,7 @@ SKIP_FUNCTION_MACROS   = YES
 #---------------------------------------------------------------------------
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
-TAGFILES               = core.tag=../core \
+TAGFILES               = main.tag=../core \
                          math.tag=../math \
                          tnl_dd.tag=../tnl_dd \
                          swrast_setup.tag=../swrast_setup \

doxygen/swrast_setup.doxy

@@ -41,7 +41,7 @@ SKIP_FUNCTION_MACROS   = YES
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
 TAGFILES               = tnl_dd.tag=../tnl_dd \
-                         core.tag=../core \
+                         main.tag=../core \
                          math.tag=../math \
                          swrast.tag=../swrast \
                          tnl.tag=../tnl \

doxygen/tnl.doxy

@@ -41,7 +41,7 @@ SKIP_FUNCTION_MACROS   = YES
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
 TAGFILES               = tnl_dd.tag=../tnl \
-                         core.tag=../core \
+                         main.tag=../core \
                          math.tag=../math \
                          swrast.tag=../swrast \
                          swrast_setup.tag=swrast_setup \

doxygen/tnl_dd.doxy

@@ -39,7 +39,7 @@ SKIP_FUNCTION_MACROS   = YES
 #---------------------------------------------------------------------------
 # Configuration::addtions related to external references   
 #---------------------------------------------------------------------------
-TAGFILES               = core.tag=../core \
+TAGFILES               = main.tag=../core \
                          math.tag=../math \
                          swrast.tag=../swrast \
                          swrast_setup.tag=../swrast_setup \

src/mesa/main/bufferobj.c

@@ -383,7 +383,6 @@ _mesa_init_buffer_objects( GLcontext *ctx )
  * glGetTexImage, etc) we call this function to check that we're not
  * going to read out of bounds.
  *
- * \param ctx  the rendering context
  * \param width  width of image to read/write
  * \param height  height of image to read/write
  * \param depth  depth of image to read/write
@@ -511,7 +510,7 @@ _mesa_BindBufferARB(GLenum target, GLuint buffer)
  * Delete a set of buffer objects.
  * 
  * \param n      Number of buffer objects to delete.
- * \param buffer Array of \c n buffer object IDs.
+ * \param ids    Array of \c n buffer object IDs.
  */
 void GLAPIENTRY
 _mesa_DeleteBuffersARB(GLsizei n, const GLuint *ids)

src/mesa/main/colormac.h

@@ -221,5 +221,7 @@ do {						\
 #define PACK_COLOR_233( B, G, R )					\
    (((B) & 0xc0) | (((G) & 0xe0) >> 2) | (((R) & 0xe0) >> 5))
 
+/*@}*/
+
 
 #endif /* COLORMAC_H */

src/mesa/main/colortab.c

@@ -175,11 +175,11 @@ set_component_sizes( struct gl_color_table *table )
  * Update/replace all or part of a color table.  Helper function
  * used by _mesa_ColorTable() and _mesa_ColorSubTable().
  * The table->Table buffer should already be allocated.
- * \param start - first entry to update
+ * \param start first entry to update
- * \param count - number of entries to update
+ * \param count number of entries to update
- * \param format - format of user-provided table data
+ * \param format format of user-provided table data
- * \param type - datatype of user-provided table data
+ * \param type datatype of user-provided table data
- * \param data - user-provided table data
+ * \param data user-provided table data
  * \param [rgba]Scale - RGBA scale factors
  * \param [rgba]Bias - RGBA bias factors
  */

src/mesa/main/config.h

@@ -201,8 +201,6 @@
 #define MAX_PROGRAM_MATRIX_STACK_DEPTH 4
 /*@}*/
 
-/*@}*/
-
 
 /**
  * \name Mesa-specific parameters

src/mesa/main/context.c

@@ -1607,7 +1607,7 @@ _mesa_destroy_context( GLcontext *ctx )
  * \param mask bitwise OR of GL_*_BIT flags
  *
  * According to the bits specified in \p mask, copies the corresponding
- * attributes from \p src into \dst.  For many of the attributes a simple \c
+ * attributes from \p src into \p dst.  For many of the attributes a simple \c
  * memcpy is not enough due to the existence of internal pointers in their data
  * structures.
  */

src/mesa/main/macros.h

@@ -654,7 +654,4 @@ do {                        \
 #define LEN_SQUARED_2FV( V ) ((V)[0]*(V)[0]+(V)[1]*(V)[1])
 
 
-/*@}*/
-
-
 #endif